Medical autoclave Vacuklav 23B+

benchtopbuilt-inprogrammable

The Vacuklav 23 B+ is a ”class B" autoclave according to the European standard EN 13060 and offers 5 programs and 2 test programs It works according to the fractionated pre-vacuum method. This means: At first the air is evacuated from the chamber with a very effective vacuum pump. Then there is a repeated intake of steam which is always immediately pumped out again. The result is that at the beginning of the actual sterilization, there is no longer any air in the chamber or in wrapped hollow-instruments or in textiles which would endanger the success of the sterilization. The Vacuklav is equipped with a fractionated post vacuum for effective drying as a prerequisite for long-term storage of packaged sterilized materials. Sensors and an innovative microprocessor control regulate and monitor the parameters necessary for a secure. The Vacuklav 23 B+ is designed as a “stand alone” device and only needs a power supply. An optional water filtration system is available for the automatic supply of high-quality water. The required documentation of the sterilization cycles is carried out over the built-in interface connection to the report printer MELAprint 42 or to the connection to the practice PC. The documentation software MELAwin developed by MELAG is required for this. Additionally, it is possible to connect the MELAflash CF Card Printer used to save the sterilization records on the MELAflash CF Card. The sterilization records can be read out on every PC with the MELAflash CF-Card reader For the optimal employment of the chamber, you can select from three mountings: the mounting C for 6 trays or for 3 standard tray cassettes is standard.