UV-vis spectrophotometer M508

single-beamtungstenhalogen

Wipe-clean LCD liquid crystal display and membrane keypad, ideal for laboratories that are hard to keep clean. Built in large memory to store up to 200 test modes. Large range of accessories for laboratory automation and specific tests. Complies with UKCA and CE requirements for safety and ESD/EMC emission and susceptibility. Calibrated in the UK by qualified engineers using international standards for wavelength, absorbance, resolution and stray light. Operating Modes Basic Mode (Abs, %T, Conc) Quantitative (concentration calibration curves) Wavelength Scanning (when connected to and controlled by PC) Kinetics (including timedrive) Multi-wavelength Performance Validation Software and PC Control Local control with sealed, solvent resistant keypad Remote control via PC CamSpec K3 Analyst application software USB output for the transfer of results Pharmacopoeias The CamSpec M508 passes the following pharmacopoeia tests: Potassium Chloride stray light test Toluene in Hexane resolution test Holmium Perchlorate solution wavelength test Potassium Dichromate absorbance test Technical Specifications Display - Two-line, 9-digits tability - ±0.002A/hr@500nm Sample Compartment - Fits 100mm path length cuvette with optional holder Standard Cell Holder - 4 position 10mm cell changer Software - K3 Analyst, optional Zero Drift - <0.003A per hour after warm up Bandpass - 2nm Stray Light - <0.2%T@220nm and 360nm Photometric Accuracy - ±0.5%T Photometric Range - 0-125%T, -0.097-1.999A, 0-1999C (0-1999F) Printer Interface - Bluetooth Computer Interface - USB for PC control and USB for data export Power Requirements - 90V-250V AC, 50Hz/60Hz