Super translucent material is intended for the manufacture of veneers, inlays, onlays, monolithic crowns for frontal restorations, crowns for abutments, bridges up to 3 units. The translucency of the material is comparable to the translucency of lithium disilicate. Blanks are presented in white and pre-shade in 16 shades according to the VITA®
Material Characteristics
Translucency - 49%
ISO 6872:2015 Classification - Type II class 5
Thermal expansion coefficient,
10-6 К-1 - 9,9±0,2
Crack resistance, MPa ∙ m0.5 - 2,4
Hardness (Hv10) - 1250
Density before sintering, g / cm3 - 3,26
Density after sintering, g / cm3 - 6,04
Chemical Composition
ZrO2+HfO2+Y2O3 +Al2O3 *, массовый % - (>99.9)
Y2O3, mass % - 9.3
Al2O3, mass % - 0.05
SiO2, mass % - ≤ 0.02
Fe2O3, mass % - ≤ 0.01
Na2O, mass % - -
HfO2, mass % - -
* The presence of other impurities is allowed, but not more than the limits established in GOST 21907
Note:
To match the sintering temperature with the program temperature, make sure your furnace is calibrated correctly. Lower temperatures will create a deeper shade and lower transparency. Higher temperatures will create a lighter shade and higher transparency, but worse material strength.
Models
Supertranslucent material is presented in the form of blanks:
- diameter 98.5 mm for open CAD / CAM systems
- diameter 95.0 mm compatible with the Zirkonzahn® system
Thickness of white and pre-shade blanks: 10, 12, 14, 16, 18, 20, 22, 24 (25) mm