Dental CAD/CAM materials

... base cast for Brain Xpert: • Used in fabricating frameworks for conventional casting technique • Allows the use of precice CAD/CAM technology • Leaves no residue

... Zirconia – For full contour chairside zirconia The greatest benefit of CEREC Zirconia is the high flexural strength of the material. It is suitable for individual crowns as well as small bridges and can be processed in ...

inCoris TZI - Highly translucent sintered zirconium oxide ceramic for non-veneered restorationsinCoris TZI allows CEREC users with Premium Software to fabricate anatomically sized crowns and bridges with up to nine units. Thanks to its ...

Versatile dental milling Planmeca PlanMill 50 S can be used to mill discs, blocks and prefabricated titanium or cobalt chrome abutments. The unit is capable of both wet and dry milling of indications – such as various ...

... splints and dental models. CAD/CAM Milling Blocks Ceramic materials, resin-based materials

... stability. Restorations are processed and fitted intraorally without additional cost using commercially available luting material. Indications Fully anatomical crowns and bridges (max. 3 units extending to the ...

Polychromatic, super high translucent zirconia Zolid FX Multilayer is a polychromatic, super high translucent zirconia with integrated shade and translucency gradient. Smooth shade transitions simulate tooth enamel, dentine and cervical ...

Pre-stained, super high translucent zirconia Zolid FX Preshades are pre-stained, super high translucent zirconia blanks for monolithic or anatomically reduced anterior restorations and up to 3-unit bridges in the molar region. The blanks, ...

... for sealing zirconia structures with threaded screw channels in the patient’s mouth Processing with CAD/CAM Thread Milling Burs 3mm and CAD/CAM Thread Milling Burs ...

Zirconia Aidite Sirona SHT Multilayer Code Article APS401519SHMA35 40 x 15 x 19 mm - COL. A3,5 APS5515519SHMA1 55 x 19 x 15,5 mm - COL. A1 APS5515519SHMA2 55 x 19 x 15,5 mm - COL. A2 APS5515519SHMA3 55 x 19 x 15,5 mm ...

... high, smooth consistency, non sticky. For powderless digital 3D data acquisition of the counter bite. Can be read by all CAD/CAM/CIM systems, optimum exposure quality and artifact-free image reproduction ...

... the quality of our products. The application of Yttrium stabilized zirconium dioxide is a standard in dentistry. The raw material, the zirconia powder for the production of discs is to be of high purity and we are using ...

ARROW ZIRCONIA DISCS FOR MANUAL SYSTEMS These discs are similar to the Arrow series but produced under the uniform process which ensures stable shrinking. ARROW ZIRCONIA DISCS FOR MANUAL SYSTEMS Amman Girrbach Ceramill Multi-X®* The discs ...

ARROW DISCS FOR TRAINING AND WORKING MODELS Discs are suitable for making of models on CAD CAM basis. Special mixture of materials provides good properties for milling, safe working and stable form.

Wax disc for the fabrication of wax setups. Features/Benefits comfortable wax try-in thanks to fabrication of complete CAD/CAM denture out of white wax precise wax setup thanks to precisely ...

... Resin nano ceramic material delivers exceptional durability, excellent polish retention. Available in eight shades and two translucencies. Lava™ Ultimate Restorative is a unique new resin nano ceramic CAD/CAM ...

... and excellent light-optical properties, this material produces impressive results. Years of clinical experience The material is used in the dental laboratory in conjunction with ...

HYBRIDS Combine the positive characteristics of composite and ceramic. The sophisticated grinding technique of the IDC Mill X5 and IDC Mikro ic was specially developed for hybrid-ceramics, processes the blanks effortlessly ...

... innovation, Straumann® n!ce®, is a proprietaryglass-ceramic material that combines biocompatible and esthetic materials to create fully crystallized milling blocks for natural looking CAD/CAM ...

Platinum 75 CAD Platinum 75 CAD is an addition silicone recommended for all CAD/CAM users for making scannable bite regulation keys in the articulator. Characteristics • ...

Greater durability • Suitable for all implant- and tooth-supported prostheses • Light material for greater patient comfort • Biocompatible material specially suited to soft tissue

Highest filler content (86 % w/w) Resembles natural teeth perfectly Excellent physical values for flexural strength and abrasion No firing required Can be processed using any conventional milling unit Can ...

IP Wax-Blank CAD/CAM Description • Hard wax, white • Clean and smooth • Melting point at 105 – 110° C • Organic • To be burnt out without residues • Dimensions: 98 mm x 20 mm

Multi-layered, pre-coloured PMMA discs for making temporary crowns and bridges. A multi-layered disc is composed of five shades of colour with gentle colour transitions that give it a natural look. CHARACTERICTICS: Vickers hardness: ...

PMMA discs for fabrication of longer lasting crown and bridges, manufactured with high molecular cross linked acrylic which guarantees high detailed precision and resistance. Advantages: High milling reproduction details ...

... dentures. This is due to their mechanical properties. Cendres+Métaux has now expanded its CAD/CAM milling services with precious metal alloys. The combination of the CAD/CAM ...

BruxZir Milling Blanks are used for the production of full-contour zirconia crowns, bridges and implant crowns. Made from the highest quality zirconia powder, which is chemically and physically reprocessed to further ...

... Perfectly suitable for CAD/CAM scanning, without powder. The highly filled material is very easy to trim with a scalpel or grinder. Easily distinguishable lavender color. Included Bite ...

Scannable bite registration material based on A-silicone. High final hardness, thixotropic and stable. Very easy to cut and to mill. Specially developed for use in the CAD/CAM area.

Product information "Tizian Blank Wax 98 mm, wax"Using this CAD/CAM blank you can mill your wax models and frameworks for moulding. The blank is available in several colors and heights. These blanks are ...

VITA ENAMIC® is the world's first dental hybrid with a dual network structure that combines the best of both a ceramic and a composite. The CAD/CAM blocks are not only suitable for the ...

... machined for dental restorations by different CNC or manual milling systems. Applications include anterior and posterior, single tooth or bridge restorationsDirection for UseFor CAD/CAM ...