AMCAREMED variable-area flow meters

Output: 0 l/min - 5 l/min

The purpose of the Moriya Flowmeter is to control and indicate the flow of gases. The operating principle is based on a conical tube and a float (sphere). The gas enters through the base of the conical ...

Output: 0.07 l/h - 43 l/h
Pressure: 1,013 mbar

... ® not require power supply ensuring a cost-free measure even in hazardous areas (ATEX classified). Therefore are best used in applications where control of flow should not weigh too heavily ...

Output: 0 l/min - 15 l/min
Weight: 247, 658 g

• Body: Brass in Chrome Finish • Needle Regulating Valve: Brass • Column and Scale: High impact transparent Polycarbonate injection • Seals: Latex Free. Entry: • 1/8"

-Model : MB-15F -Pressure : 200bar -Fix Pressure : 3.5bar -Weight : 765g -Use Object : Serious case, respiratory organ disease person

Output: 0 l/min - 70 l/min

... high flow. Every Maxtec DFB flow meter has a dual-scale, which essentially combines 2 flow ranges into 1 flow meter. Our Dual Taper ...

Output: 0 l/min - 15 l/min
Pressure: 50 psi

... Features • Use crack-resistant tube made of polycarbonate, pure brass flowmeter body with chrome coating. • The flow output accuracy is within ±10% which meets médical standard. • Flow ...

Output: 0 l/min - 100 l/min
Pressure: 1, 0.5, 0.7 MPa

... Gas　N₂,Air,H₂,He,Ar,O₂,CO₂ etc.　 Liquid　H₂O ■Flow range： Gas　5mL/min～100L/min Liquid　5mL/min～2L/min ■Accuracy：±2%F.S. Wide varieties of flow range available from ultra-minute flows ...

Output: 0 l/min - 15 l/min
Pressure: 2.5 bar - 7 bar
Weight: 490 g

... robustness conception. - High length scale and dilated scale for light flow. - Fine control flowmeters, individual calibration. - Safety regulation even working with light flows and preventing the ...

Output: 4 l/min - 15 l/min
Precision: 10 %
Pressure: 4.5 bar

Just Flow F Series flowmeters can be used in medical facilities with an available gas piped network. Features: • Available with a humidifier bottle, selector-bearing direct outlet. By turning a ...

Pressure: 4 bar

... , and have been designed to deliver precision flow rates, without the need for any calibration. 7 year service interval 7 year warranty No calibration required; EVER! Available in three different flow ...

Output: 0 l/min - 10 l/min

O2 0-1,1-10L/min N2O 0-1,1-10L/min Air 0-1,1-10L/min O2 Single tube flowmeter O2 two tube flowmeter O2&N2O flowmeter O2,N2O&Air flowmeter

Output: 0 l/min - 15 l/min

Tecnomed oxygen flowmeters ara ergonomically designed in accordance with standards in order to provide oxygen flow to patients. It has precise flow rates for measurement, easy to use ...

Output: 0 l/min - 15 l/min
Pressure: 4.5 bar
Weight: 330 g

Adjustable flow meter for low pressure. For medical use. Connection outlet for moistening cup or spout for mask. Also available double flow meter with float meter ...

Pressure: 50, 60 psi

... wo gas specific adaptor. Features Lightweight aluminum body. The shut-off control valve will not drift from a set flow rate over extended durations. Incorporates durable impact-resistant polycarbonate outer and ...

... accurately measures flow at 0-15Lpm even at variant inlet pressures. Accuracy is fulfilled within 10% to attain maximum efficiency for patient and environment. Each flow meter is calibrated ...

Output: 0 l/min - 30 l/min

Output: 1 l/min - 15 l/min

Oxygen Flowmeters are used to provide Oxygen to the patient from Madical Gas outlets through nasal cannula or mask by regulating flow rate and passing through a humidifier when required. Schönn Flowmeters ...

Output: 1 l/min - 15 l/min

Oxygen flow meter 1-15 L / min Item no. 32015-00

Output: 0 l/min - 15 l/min
Pressure: 4 bar

Flowmeter with Rail Apparatus Flow Rate: 0-15 l/min at 4 Bar

Oxygen therapy flowmeter with Porter quick connect.

Output: 0 l/min - 5 l/min
Weight: 415 g

These are the units that allow the flow rate of O2 gas to be adjusted and given to the devices. Flowmeters are instant flow measurement devices designed for dosing ...

Output: 0 l/min - 15 l/min

... Air Flowmeter is suitable for use in a broad range of respiratory therapy applications and provides accurate flow measurement and control within a range of 0-15 liters per minute. The flow ...

Output: 0 l/min - 50 l/min

Oxygen Flowmeter suitable for central system Consists of chrome plated brass material. Resistant to oxygen and compressed air. Central system connection jack is produced from brass material. Our product has a 3-year ...

Output: 0 l/min - 30 l/min
Weight: 320 g

... by STM is conceived and realized according with MDD 93/42/EEC and related norms. FLOWMETER, single type, with downstream flow regulation, available for Oxygen and Medical Air. It is constituted by: Probe for the ...

Pressure: 0 bar - 16 bar
Weight: 400 g

The Flowmeter is used to plug into the medical oxygen socket connected to the central gas system and to deliver the oxygen to the patient by passing it through the humidifier through the nose nozzle and mask. The scale ...