Lniswissgas gas generators

The Minidox-M is a chlorine dioxide gas generation system designed for use in any pharmaceutical, manufacturing, laboratory, or research setting. The Minidox-M provides a rapid and highly effective method to sterilize ...

Output: 0 l/min - 15 l/min
Output pressure: 20 psi

Arigmed Portable Personal Médical Oxygen Generator with PSA technology (Pressure Swing Adsorption) oxygen and nitrogen séparation technology from OGSI (USA), allow oxygen production on site for one person or patient ...

Output pressure: 0.35 MPa - 0.5 MPa
Gas purity: 99.99, 99.9, 99 %
Rated capacity: 0.4, 0.8 kW

The M series is an equipment which pursues improvement in miniaturization and maintainability. Adoption of a multi-layout package makes it possible to select the directions of panel surfaces and exhaust ducts according to installation ...

・To Clear Skin using a Fine Bubble and reduction of Physical Burdens while Helping People Bathe No need for installation work thanks to its unique compact design. Only sitting in warm water that has ultra fine bubbles generated by ...

Equipment dedicated to the generation of a HEPA filtered air flow with the task to prevent air inlet or outlet in a fixed opening from an environment at higher pressure to one at lower pressure. Applications: Insulation of one environment ...

Generators Capacity: 3Nm3/h~100Nm3/h( single unit) Power supply: 380V/220V, 50/60HZ Out Pressure: ≥ 0.3 Mpa Operation Noise: ≤75dB(A) Pressure Swing Adsorption (PSA) is the most commonly used, most effective for ...

ULTRA ZERO AIR GENERATOR FOR TOC & PURGE AIR FOR FTIR ANALYZERS Characteristics: AIR Purity: < 1 ppm CO2 < 0.05ppm HC, CH4, CO, silicon free < -70°C dew point Capacity: 1.5 & 3 L/min Outlet pressure: ...

Output: 150 m³/h
Output pressure: 4 bar - 7 bar
Rated capacity: 100 W

... production system, the backup system is activated without the need for intervention Features Chemical Compatibility All gas contact surfaces are made of copper, brass and gaskets which are compatible with all medical ...

Gas purity: 93 %

... much higher than that of oxygen. Nitrogen is preferentially adsorbed by zeolite molecular sieve, and oxygen is enriched in the gas phase to form finished oxygen. and then by decompression to atmospheric pressure, adsorbent ...

Output: 20, 40, 25, 35 l/min
Output pressure: 8 bar
Gas purity: 99 %

ZEFIRO Nitrogen Generator is designed specifically as a stand-alone system to provide nitrogen to single LC/MS applications which require a constant and autonomous supply of nitrogen flux. The Nitrogen generator ...

NEW CENTRAL STATION 200M3/H WITH ELECTRONIC CONTROL BOARD

Nitrogen (N2) membrane generators are complete turn-key systems. They can be built to your specifications, and we can match our generators to your compression equipment for any application. On Site systems ...

Output pressure: 6 bar - 10 bar

Nitrogen generators for industrial applications, purity from 95% to 99,999%. Perfect for small quantities of nitrogen, from 500 liters/hour up to 35 Nm3/h. Advantages: PSA technology Easy set up, only dry ...

Output pressure: 10 psi
Gas purity: 95, 96, 97, 98, 99 %

Nitrogen generators utilize proprietary membrane separation technology. The membrane separates compressed air into two streams: one is 95-99% pure nitrogen and the other is air enriched with oxygen, carbon dioxide, water ...

... monitoring, industrial hygiene surveys, odor surveys, and other instruments measuring gas concentration. All models enable calibrations traceable to NIST standards for almost any gas analyzer, in the ...

Output: 0 l/min - 20 l/min
Output pressure: 0 psi - 100 psi
Gas purity: 95 % - 99 %

Compact Nitrogen Generator for Efficient Sample Concentration The NITRO-GEN nitrogen generator is a compact, high-performance gas generation solution designed to support nitrogen evaporators ...