Other medical industry devices

Type 201 is a normally-closed direct-acting plunger-type solenoid valve. Direct-acting, Sub-base When energized, the solenoid armatureis drawn in against a spring to open the valve. The solenoid epoxy encapsulation efficiently dissipates ...

This valve shuts off the gas for each area, such as operating theatres, ICUs and patient wards. In the event of medical gas supply failure, such as by a disaster, the shut-off valve can also be used supply gas from here to each area. Integrated ...

The novel Ampha X30 opens a new era of cell analysis: simultaneous measurement of cell count and cell viability, and in addition more information about the status of the cells, like metabolic activity. Based on Impedance Flow Cytometry, ...

Length: 15 m
Inner diameter: 10 mm

With excellent resistance to temperature, ozone, and weathering, the Medline 10.0 x 2.5mm Silicone Tubing offers increased tear strength, less bacterial build up and a higher clarity over peroxide silicone rubber tubing. It also has ...

The 3017M Chlorine Analyzer is YSI’s newest online analyzer! This DPD colorimetric analyzer is used for continuous measurements of free or total chlorine in municipal drinking water and wastewater applications using an EPA approved method. ...

Clamping force: 55 tf - 550 tf

Energy saving, clean, compact The beltless EcoPower scores with a compact injection unit and the clean design of its clamping unit, featuring a highly efficient direct drive. The braking energy of the drives, normally returned to the ...

Speed: 300 rpm

The PTK high speed mixer model, PM-C is the best fit for laboratory use, with excellent performance and design. The interchangeable vessel design enables the cleaning time and the material loss to be minimized, providing the maximized ...

A tabletop semi-automatic crimper designed for easy setup and operation with the capacity to switch between standard continuous thread (CT) caps, aluminum crimp caps, and R.O.P.P. caps. R.O.P.P. | Screw Cap D max. 200mm - H max. ...

Demand Vale with 6’ Oxygen Hose and Mask Series Demand Valve

Capacity, 1000 tons/year40 Sorting posts2-6 Version of executionmanual/semiautomatic Semiautomatic mobile waste sorting plant on the chassis with a capacity of up to 5 tons per hour. 2-6 sorting stations with automatic separator ...

For decades Fairmont Medical has been at the forefront of providing a safe and efficient method of removing diathermy smoke during minimal invasive surgery. Smoke created during the burning of tissue with diathermy instruments, contains ...

This hand operated machine easily removes medications from MTS punch cards. It has the capability to deblister 30/31/32, 60/62 and 90 dose cards, as well as control cards. Our deblister machine saves both time and money on medication ...

Weight: 250 g

■ Sterilisation passages of exchangable membranes to be adjusted on a scale (up to Wtimes) ■ To be connected to compressed air injector or vacuum regulator ■ Necessary accessory, membrane filter sei (packaging unit of 10),

Consistent material performance guaranteed. Due to the nature of high-performance photopolymer materials, a thorough mix of the resin before printing can make sure they perform at the highest reactivity. Especially for materials that ...

IUID compliance requires contractors to the United States Department of Defense to meet strident standards that include proper MIL-STD-130 marking. Marking can only be achieved through approved methods and hardware solutions that utilize ...

You can recover up to 95% of unsintered powder with our advanced powder collecting system. Such a feature is not available on the SLS 3D printer market. The recovered powder can be refreshed and reused, driving up savings and limiting ...

Weight: 10.5 lb

The SOMNI W.A.G. Waste Anesthetic Gas Collection Filter is an activated charcoal filter developed to absorb 200 grams of halogenated agent. The W.A.G. filter can be incorporated into an inhalant anesthetic system to passively and safely ...

The ECP 12 combines a case packer with a palletizing module for fully automatic end-of-line packaging. Cartons are packaged in cases ready for dispatch and the cases stacked on pallets. This way, solid and parenteral products are exceptionally ...

Filtration capacity: 0.2, 1.2, 5 µm

BQ in-line membrane filters are widely used in drug and fluid delivery for the removal of bacteria and large aggregates or particulate material generated during preparation, handling and infusion of drug combinations used in various patient ...

Massive design to avoid Cobot vibration Able to stand offset loads Powerful Brushless motor Maintenance Free Features INPUT Voltage 24V Communication ModBus TCP/IP Std handset adjustment Available Max dynamic push load ...

FPI AQMS-300 Ozone analyzer measures ambient O3 concentration in ppb level by utilizing UV photometric absorption technology. Product features • Accurate direct UV absorption with reference comparison; • Compliance with US EPA ...

Weight: 10, 13, 16, 17.5, 23 kg

HEPA (H14) and ULPA (U15, U16) terminal panel filter with sheet metal hood. Especially made for turbulent and laminar airflow applications in cleanrooms and clean air devices. Easy installation with flexible duct on integrated spigot. Individually ...

LaserGear BOQX is an entry-level Class 1 bench top fiber laser marking system that combines simplicity with power. Featuring a 20W MOPA fiber laser, BOQX delivers both strength and speed to accomplish a variety of applications. A front ...

Isotope analysis of gases, liquids, and carbonate minerals iso FLOW is a fully automated, continuous flow preparation system for the isotopic analysis of samples which have been prepared into septum sealed vials. These samples can be ...

Speed: 0 rpm - 1,500 rpm
Temperature range: 10 °C - 132 °C

1.Stainless steel mixing tank with agitator has heating and heat preservation functions, and is manufactured, tested and accepted according to the Technical Conditions of Steel Welding Containers. 2.Stainless steel mixing vessels volume ...