Other medical industry devices

... WaveTrack IMU sensors: a natural complement to any modern wireless EMG solution More than just EMG Thanks to years of experience in transmission protocols and miniaturization, in 2015 we have released the smallest wireless IMU transmitter in the ...

Antibacterial efficacy: 99.99 %
Antiviral efficacy: 99.99 %

... – MEDICAL GRADE PE-PP MATERIAL – HIGH-ACTIVITY BACTERIAL AND VIRUS HOLD EFFICIENCY – COMPATIBLE WITH ANESTHESIA AND VENTILATOR CIRCUITS – ADULT AND PEDIATRIC SIZES – 22M-22F/15M CONNECTOR DIMENSIONS GAS SAMPLING PORT LOW DEAD SPACE LOW FLOW RESISTANCE STERILE ...

4K@60 HDMI over IP Transmitter• 4K@60 1Gbps AV over IP transmitter in Unicast or Multicast mode.• IP interface: RJ45• Supports comprehensive USB over IP functionality (USB flash drive, keyboard and mouse) and seamless collaboration across multiple windows• ...

UHD+2x1 HDMI/DP AV over IP Transmitter with PreviewZero latency transmission for all signal types including 4K@60 RGB/ YUV 4:4:4, HDR10, 3D and broadcast-friendly 4K@60 10-bit 4:2:2Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Bypass ...

... UHD+ 2x1 HDMI/DP to HDMI Bi-directional AVoIP Transceiver W/USB 2.0 HUB ．Broadcast quality scaler, programmable to scale up or down any resolutions up to 4K ．Video wall image splitting with bezel correction ．Ultra-light compression, lossless for ...

The 16 mm FASPROP is a high-precision, 2/2 proportional valve engineered for accurate low flow control, down to ml/min. It offers a frictionless design for enhanced repeatability. Used by the largest Gas Chromatography and Mass Spectrometry manufacturers ...

... An ultra-compact solenoid valve designed for applications requiring high flow rates and rapid response times in a small footprint. Its single-screw design, captive seal and direct connection to PCB enable ultra- fast and robust assembly. Flow of a ...

... The iSort, combined with the iLift elevator, is the perfect solution to improve the packaging line efficiency by sorting broken, twins, or capped tablets before entering the feeding system. Key benefits Sort broken, twins and capped tablets Excellent ...

The manual 2-ways diverter is used to distribute the product into 2 drums/containers. Mainly developed to be installed on non-HMI equipped machines, this inexpensive efficient solution will allow you more autonomy in your production. Developed as a “DT” ...

... The automatic diverter is used to distribute the product into 2 or 4 drums according to the quantity of product produced, or alternatively according to the weight produced using scales. Key benefits Extends manufacturing time without supervision Reduces ...

Seal width: 12 mm
Sealing speed: 10,000 mm/min
Power: 500 W

... 7” colored capacitive LCD touch screen, graphical operation interface, in-built clock, random setup of parameters and Large-font printing and automatic storage function ; Have in-built forward (backward) counter to accurately count sealing quantity; The ...

... Calibration Target Micro V1 with Resolution Test 1000LP

Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system, from microscope to camera and visual systems.

Opto´s Calibration ...

... The stage micrometer from Opto in the form of a microscope slide is a helpful tool for the calibration of microscopes.

- Glass scale 50 mm in 0.1 mm and 0.01 mm

- Calibration of measurement software

The stage micrometer is also available ...

... Opto's Particle Test Target allows the calibration of measurement functions in microscopes through objects in different forms and sizes or of resolution of an optical system measured in Line Pairs per mm. It is used in the field of Residual Dirt Analysis.

The ...

Variety of connections and tubing to suit the majority of NIBP connections

Weight: 3.7 kg
Width: 22 cm
Height: 12 cm

... – Compatible with gas standards and gas type – All-in-one gas flow analyzer – Measures and calculates all common respiratory parameters – Built-in data storage – Portable with battery operation The standard model for universal applications Includes ...

Analysis duration: 0 s - 60 s
Weight: 0.4 kg
Width: 11.4 cm

... – Test and calibrate ventilators – Flexible trigger settings and an optional oxygen sensor – Built-in pressure and gas flow sensors – Measure and display 16 different ventilation parameters With the CITREX H3, ventilators can be simply tested and calibrated. ...

Speed: 2,000 rpm - 25,000 rpm

... The OV 725 Digital incorporates state-of-the-art technologies to change your dispersing experience, providing high shearing force, effortless operations, and lasting durability for excellent homogenisation, emulsification, suspension and mixing performance. The ...

... Injection mould - Cold Runner - Semi Hot Runner Disposable Syringe Barrel / Plunger / Gasket Available Sizes - 0.3ml - 0.5ml - 1ml - 3ml - 5ml - 10ml - 20ml - 50ml Hypodermic Needle purpose Hub / Cap Available Sizes - 18G - 19G - 20G - 21G - 22G - ...

... 2-way diverter used for continuous filling of containers with tablets or capsules. Available as DT (dust-tight) and WIP (Wash-in-Place) version Manually processed filling of two batches, alternating Compatible with deduster models KD7010, KD7015, ...

... Electronically controlled 2-way diverter used for continuous filling of containers with tablets or capsules. Available as DT (dust-tight) and WIP (Wash-in-Place) version Automatically processed filling of two batches, alternating Compatible with deduster ...

... Electronically controlled drum diverter used for continuous filling of multiple containers. Number of positions (max. 12) and discharge sequence can be defined as needed Jam monitoring using a sensor at the inlet Random definition of every position ...

Speed: 2 rpm - 6 rpm

... For the production of pharmaceutical solids, the homogeneity of the produced mixture is a crucial process step. An even distribution of all components in the mixture is the goal of this process. L.B. Bohle has produced blenders for pharmaceutical ...

Seal length: 50 mm - 2,000 mm
Seal width: 50 mm - 500 mm
Sealing speed: 10 m/s

... Product Introduction
This model integrates cutting, sealing, and printing functions to realize fully automatic pouch processing. It is suitable for paper-plastic pouches, paper-plastic 3D pouches, paper-plastic rolls, paper-plastic ...

Seal width: 12 mm
Sealing speed: 9,500 mm/min - 10,500 mm/min
Sealing temperature: 60 °C - 220 °C

... EFO58 Series Automatic Longitudinal Cutting Sealing Machine

Technical Parameters

• Control System: 5" Color LCD Capacitive Touch Screen
• Cutting Speed: 18 ±0.5 m/min
• Sealing Speed: ≥10 m/min
• Seal

The new cutting machine is a special equipment for cutting medical paper-plastic roll bags or Tyvek roll rolls. It is ideal for use with various types of sealing machines produced by our company. This cutting machine is a new type of cutting mechanism ...

... 01 Calibrated Refill Robotic Arm can support batch filling for two types of boxed medications simultaneously with maximum speed reaching 3000 boxes per hour. 02 Equipped with a recognition system, it can automatically correct deviations during the ...

... Convenient operation: take out the adjustment module as a whole (no need to remove the rubber shaft) and directly adjust the spacing of the partition according to the specifications of the medication plate, which is convenient and labor-saving. High ...

Speed: 2,430 rpm - 4,260 rpm

... Overview
Labotemp Tissue Homogenizer LTH-01 is a high-performance tissue homogenizer designed for rapid grinding, disruption and homogenization of biological samples in research and diagnostic laboratories. It combines three-dimensional high-speed ...

Speed: 180 rpm - 720 rpm
Temperature range: 0 °C - 35 °C

... Product overview
The Labotemp Stomacher LTH-201 is a benchtop stomacher homogenizer designed for fast, sterile and reproducible sample preparation in microbiology, clinical and research laboratories. The unit processes samples directly inside ...

Speed: 0 rpm - 3,000 rpm

... Description
Labotemp Multi-function Vortex Mixer LVM-06 is a compact benchtop vortex mixer engineered for rapid, uniform mixing of biological samples, reagents and laboratory solutions. Driven by a maintenance-free brushless DC motor with a ...

... Atlas Column is designed for maximum versatility, Atlas can be easily configured with different gripping tools to handle canisters, tanks, bin line components and process equipment.
Its adaptable structure ensures operational continuity ...

Power: 0 kW - 1 kW
Rotational speed: 0 rpm - 120,000 rpm
Diameter: 1.5 mm - 85 mm

... Characteristics

• Type: DC, 3-phase, brushless
• Configuration: frameless, compact
• Number of poles: multipole
• Applications: medical equipment; robotics; collaborative robots; conveyor belts; packaging machines; compressors;

Power: 0 kW - 3 kW
Rotational speed: 0 rpm - 50,000 rpm
Diameter: 12 mm - 300 mm

... Overview
Mirmex axial flux motors are engineered for applications that require high torque density, a compact axial profile and efficient operation. These BLDC units are available for low-voltage systems (12 V, 24 V, 36 V, 48 V), provide up ...

... Taktvoll SVF-501 Filter uses 4-stage ULPA filtration technology. It is capable of removing 99.999% of smoke pollutants from the surgical site. Feature The unit’s ULPA filter is separate. This exclusive configuration maximizes the lifespan. A ...

Antibacterial efficacy: 99.99 %

... Short Description
Taktvoll ESU-506 smoke filter is designed for use with the SMOKE-VAC 2000 smoke evacuator system to capture surgical smoke and airborne particulates. It integrates a 3-stage HEPA filtration process and provides monitored service-life ...

Press-Out Automatic Deblistering Machine is the auxiliary equipment of the Blister Machine. It can empty tablets and capsules from rejected blister packs. The mechanism is adjustable, so changing parts is not required for different blister formats.

Press-Out Automatic Deblistering Machine is the auxiliary equipment of Blister Machine, it can empties tablets and capsules from the rejected blister packs. The mechanism is adjustable, for different blister formats, change parts are not required.

... Portable Deblister Machine When taking blister-packaged tablets, you need to use your fingers to pick the medicine out of the blister. Some medicines, especially smaller tablets, are not easy to pick out during daily use. This product can easily help ...

... Product overview

• Medical laser optical fiber designed to deliver laser energy for minimally invasive and surgical procedures
• Manufactured by Hyper Photonics S.r.l.
• Available in reusable and single-use configurations
• RFID

... 1). 360° rotatable aluminum alloy lamp cap, that can be autoclaved (135℃, 0.22MPa) for more than 500 times. Good drop resistance. No cracking. Much better than traditional plastic materials. 2). Protection cover of lamp cap is made of quartz glass and ...

... Collimated beams are more focused, the output energy of the light source is more concentrated, and the pénétration power is stronger. Full Power Mode Continuous full-power output for rapid curing of composite resins. Progressive Mode Graduai ...

... Product name

• V200

• Technical Parameters
• Accessories
• Videos
• Download
• F＆Q

• Marque:

... Caractéristiques / spécifications techniques

• Nom du produit: V400
• Marque: Guilin Veirun Medical Technology
• Dénomination commerciale: V400

... Overview

• ZCE802 series high-frequency electrosurgical analyzer for leakage current, output power and power-load distribution testing, calibration and quality control of electrosurgical equipment.

Power: 5 W
Width: 30 cm
Depth: 2 cm

The dynamic and flexible arm enables to direct simply the magnifying glass as you prefer assuring a perfect visibility of the details. It enlightens the working table with a beam of cold light emitted by LEDs with an high color rendering index. FLEXY ...

... Overview
Manual and automatic solutions for the safe extraction of molecules from their primary packaging. Systems designed for the rapid extraction of solid oral molecules, optimising MDS preparation time. Units range from compact manual models ...

... Summary
Transparent paper-plastic pouches for medical device packaging that combine a permeable sterilization paper side with a PET-based transparent composite film. Designed for compatibility with packaging equipment and validated sterilization ...

... Material
Tyvek 1073B/1059B/2FS with water-based coating combined with PE co-extruded film.

Category
Medical sterilization top-seal bag for terminal sterilization packaging.

Features

• Antibacterial barrier

... Product name
Tyvek sterilization bags (MSWPP series)

Material
Tyvek 1073B/1059B/2FS (uncoated) + PET/PE medical-grade multilayer film

Category
Medical sterilization bags

Features

• Excellent

... Made of recycled and recyclable (if not infected) LDPE, transparent to easily spot any accidental spills, extremely resistant to tears and with tear-strip opening. Watertight seal certified by BAM (German Federal Institute for Materials Research and ...

... Made of recycled and recyclable (if not infected) LDPE, transparent to easily spot any accidental spills, extremely resistant to tears and with tear-strip opening. Watertight seal certified by BAM (German Federal Institute for Materials Research and ...

... Made of recycled and recyclable (if not infected) LDPE, transparent to easily spot any accidental spills, extremely resistant to tears and with tear-strip opening. Watertight seal certified by BAM (German Federal Institute for Materials Research and ...

... Optionally, it is manufactured automatically and fully automatically. Optionally, a printer is added. Optional roles are given. ...

Filtration capacity: 0.5 µm - 5 µm

... Pre-filtration kit
The pre-filters provide a first line of protection for hospital sanitary installations, retaining coarse particles, sediments, debris and other waterborne impurities. Installed upstream of terminal filters, they reduce the ...

Filtration capacity: 0.1 µm - 0.2 µm

... Product overview

• Sterilizing-grade filtration devices designed to protect showers, taps and kitchen sprays against Legionella and other germs.
• Intended applications: nursing homes, retirement homes, care homes, healthcare facilities,

Filtration capacity: 0.1 µm - 0.2 µm

... Terminal filtration
for surgical sink or electronic hand wash station

Overview
End-of-line filters installed at the tip of spouts to retain microorganisms present in the water and reduce the risk of nosocomial infections. Anti-Legionella ...

Seal width: 6 mm - 20 mm

... The TEMPOSEAL is a robust, efficient and precise sachet sealing machine with controls for temperatures, sealing pressure and sealing time. Equipped with precise temperature regulators, digital pressure sensors, and a sealing time controlled by an ...

Seal width: 6 mm - 20 mm

... The TEMPOSEAL-PC is a pouch sealing machine designed with multiple seal validation checks. Equipped with precise temperature readings, compressed air pressure sensors, sealing time control, linked to a system for memorizing sealing parameters for each ...

Seal width: 6 mm - 20 mm

... The TEMPOSEAL-UTC is a sophisticated bag sealing machine with multiple seal validation controls, bag recognition, and automatic management of compliant or non-compliant bags. It is equipped with precise temperature readings, compressed air pressure ...

... The products is suitable for patients who have established artificial airway to exchange heat and humidity of the gas they breathe and filter particles, bacteria and viruses. Advantages: 1.99.9%Bacterial viral efficiency 2.High efficiency of Luer ...

... The products is suitable for patients who have established artificial airway to exchange heat and humidity of the gas they breathe and filter particles, bacteria and viruses. Advantages: 1.99.9%Bacterial viral efficiency 2.High efficiency of Luer ...

... The products is suitable for patients who have established artificial airway to exchange heat and humidity of the gas they breathe and filter particles, bacteria and viruses. Advantages: 1.99.9%Bacterial viral efficiency 2.High efficiency of Luer ...

If you're looking for a professional, efficient, and scalable way to design custom 3D-printed insoles, this intelligent insole design software is built to meet real clinical and production demands. As one of the first systems in the market developed specifically ...

Weight: 410, 546, 616, 688, 801 kg

The housing is made of modular panels of folded carbon steel sheet with surface protection by epoxy powder coating in RAL 7032 or 9010 color, joined together by internal bolts. Cartridge shaped filter elements with high efficiency and long life non-woven ...

Weight: 60, 150, 240, 350, 500 kg

Compact, reliable and complete equipped to eliminate dust produced by fixed or mobile localized sources. Highly specialized units which, by interpreting the most recent techniques for the use of cartridge filtering elements. The mobile version governs ...

... Overview
The LED 10W dental curing light delivers high-intensity LED output for fast, consistent polymerization of dental resins. Designed for clinical use, the unit supports both cordless and corded operation and features an autoclavable light ...

... Product overview
The E-Morlit dental LED curing light integrates a 5W LED to deliver fast, controlled polymerisation for light-cured dental composites. The device is designed for chairside dental procedures with an autoclavable light guide for ...

... Overview
High-intensity, high-efficiency LED curing light designed for integration into dental chair systems. The built-in APOZA TOP 5W delivers a constant 5W output for reliable polymerization and features a one-click on/off control. A preset ...