Other medical industry devices

Dymax MD® 209-CTH catheter adhesive cures in seconds upon exposure to UV/Visible light for fast catheter assembly. The product rapidly bonds flexible and rigid plastics and metals typically used in the manufacture of catheters and similar medical devices. ...

The UltraMaxO2 helps oxygen concentrator service technicians looking to save on costs and time when checking patient O2 concentrators. With integrated oxygen, flow, and outlet pressure monitoring in a single device, this handheld device is easy to operate, ...

Ready-to-use, right out of the box, the BioMicroLab AutoCap makes it easy for operators to quickly add or remove screw caps for 96-format internal or external thread tubes. For laboratories with various types of tubes, the interchangeable capping tools ...

... “all-in-one” desktop laser marking system. Compact Small-sized laser marking system equipped with high-precision and high-speed motorized Z axis. Flexible Available with a wide range of laser sources: 10 W, 20 W, 30 W, 40 W e 50 W. It ...

... Adapters:AC100-240V, 50/60Hz Wide spectrum:385-515nm Light power:3000mw/cm2 Curing time:5s/10s/15s/20s (Soft up mode) 5s (High power mode) 1-8times (Orthodontic mode) Volume(cm):19x12x5 Weight(kg)/PCS:0.54 Packing material:Carton Curing · Orthodontic ...

Height: 32 mm - 152 mm

The HS1 ampoule hand sealer will tip or pull seal your ampoules, then flame polish the seal. This machine is ideal for lab or small scale production facilities.

The P/AVB area valve is developed to meet the safety requirements of Standard 7396-1 and at the same time guarantee notable savings in terms of the time required for installation and building work, to achieve this we managed to combine the pendant shut-off ...

... This valve shuts off the gas for each area, such as operating theatres, ICUs and patient wards. In the event of medical gas supply failure, such as by a disaster, the shut-off valve can also be used supply gas from here to each area. Integrated all ...

Laser Marking Machine engraves the letters onto object or process an object by using the heat of laser beam. It is easy to fade away if printed by ink, or printed labels ended up by coming off. However, Laser Marking Machine can mark to an object including ...

Clamping force: 55 tf - 550 tf

... Energy saving, clean, compact The beltless EcoPower scores with a compact injection unit and the clean design of its clamping unit, featuring a highly efficient direct drive. The braking energy of the drives, normally returned to the power supply network ...

Laboratory unit on LED-basis for the curing of 3D printed parts. Ensuring of mechanics and biocompatibility through effective deep curing. Two different curing enviroments selectable depending on the application area. The nitrogen enviroment of PCU LED ...

Speed: 300 rpm

The PTK high speed mixer model, PM-C is the best fit for laboratory use, with excellent performance and design. The interchangeable vessel design enables the cleaning time and the material loss to be minimized, providing the maximized production flexibility.

... A tabletop semi-automatic crimper designed for easy setup and operation with the capacity to switch between standard continuous thread (CT) caps, aluminum crimp caps, and R.O.P.P. caps. R.O.P.P. | Screw Cap D max. 200mm - H max. 350mm Ideal for ...

The VALO X curing light has been designed from the ground up to provide you with the durability, power, accessibility, and versatility you need. Its aerospace-grade aluminum construction provides extreme durability, while the low-profile, compact, and ...

... This product is used in dental practice to irradiate polymer-based repair materials to cure them These materials include restorations, adhesives, base materials, underlay materials, pit and groove sealants, temporary restorative materials, and adhesives ...

... Demand Vale with 6’ Oxygen Hose and Mask Series Demand Valve ...

For decades Fairmont Medical has been at the forefront of providing a safe and efficient method of removing diathermy smoke during minimal invasive surgery. Smoke created during the burning of tissue with diathermy instruments, contains chemicals which ...

... ost-curing is requierd in oder to obtain the final material properties. After 3D printing in photopolymer resin-based materials is not yet fully cured. Post-curing is necessary to reach full monomer conversion for a various purpose. To maximize material ...

This hand operated machine easily removes medications from MTS punch cards. It has the capability to deblister 30/31/32, 60/62 and 90 dose cards, as well as control cards. Our deblister machine saves both time and money on medication removals. This deblister ...

The AirCure curing machine provides the final step in chairside production with a small footprint and low power consumption. The professional optical design enables AirCure to have a high curing efficiency, and through automatic calibration and automatic ...

Clamping force: 550 tf - 4,500 tf

Tederic is deeply committed to the injection molding industry, backed by professional experience. The NEO·H series is a collection of innovative patented technologies with flexible and rich functional configurations to provide you with professional customized ...

... You can recover up to 95% of unsintered powder with our advanced powder collecting system. Such a feature is not available on the SLS 3D printer market. The recovered powder can be refreshed and reused, driving up savings and limiting maintenance costs. The ...

... Odontologic aplication. Developed to allow the activities of dental bleaching direct and indirect restoration, pasting of brackets and orthodontics accessories to be executed. The LED system of this appliance has a long useful life, equivalent to 36 ...

... Full spectrum lighting and ease of use makes the CUREbox Plus ideal for curing all of your 3D print resins The CUREbox Plus is the ideal curing unit for dental labs and dentists who need to enhance the post processing procedure for 3D printed resins. ...

... For the safe pre-curing of GC GRADIA and GC GRADIA gum shades micro-ceramic composite during build-up procedures (excluding opaque materials!). Advantages Specially developed for pre-polymerisation of GC GRADIA Save pre-polymerisation Ergonomical ...