- Dental >
- Dental practice >
- Dental material
Dental materials
Highly precise hydro impression material Favourable alternative The tray remains in the mouth for approx. 3 min. only Easy and quick handling Environmental-friendly disposal with household waste Combines the advantages ...
Hager & Werken
Flexural strength: 92 MPa
... shrinkage values for highly stable printed results, which can be cleaned with water in an ultrasonic bath. Not approved for intraoral use.
Zirkonzahn
... chromatic spectrum of the Vita shades. These are water-based and acid-free Colour Liquid for the Prettau® 4 Anterior® zirconia material. For visual aid, these liquids contain special burn-out bio-pigments. Visual impression ...
Zirkonzahn
This series includes 16 colours covering the entire chromatic spectrum. They are water-based and acid-free. For visual aid, these new liquids contain special bio-pigments which assist in realistic shade distribution and colour grading. ...
Zirkonzahn
... impression material until it exits both chambers at the same rate. 4. Attach the mixing tip on the cartridge and squeeze the dispenser to extrude the required amount of material directly onto the ...
DenMat Holdings
VPS Material For reliable, consistent impressions time-after-time, choose DenMat materials. From simple cases to complex full-mouth restorations, our VPS materials deliver the extraordinary ...
DenMat Holdings
... Max® Regular Set Extra-Lite Body Bulk Kit (1:1) Splash Max® Regular Set Extra-Lite Body Bulk Kit premium VPS impression material boasts a low contact angle combined with high tear strength. With 99% recovery after ...
DenMat Holdings
37% phosphoric acid ANA Etching Gel is an enamel and dentine etchant with a concentration of 37% phosphoric acid. Its texture is perfect for any method of etching, allowing it to be easily used for enamel-only or total etch techniques. ANA ...
DIRECTA AB
OBTURYS - Permanent Root Canal Sealer based on epoxy resin
Itena Clinical
ORTHODONTIC SELF-CURING ACRYLIC RESIN Specific for orthodontic use, either for spray-on or doughing techniques. The special composition of liquid monomer has careful processing properties, without priming of the curing process (exothermic ...
LEONE S.p.a.
Ti-Core Ti-Core® reinforced core materials are the only patented, titanium and lanthanide reinforced composite material that matches the strength of dentin. Ti-Core resists the ditching and grooving during ...
ESSENTIAL DENTAL SYSTEMS
High precision silicone, ideal for all recordings, in particular for the creation of Implant Bridges, Total Prosthetics and for ceramic molding. Designed not to absorb liquids, it offers excellent dimensional stability ...
Vertysystem - A.Gree SRL
UltraSeal XT plus hydrophobic pit and fissure sealant is a light-cured, radiopaque, fluoride-releasing composite sealant. It is strong and wear resistant because it is a 58%-filled resin and has low polymerization shrinkage. ...
Ultradent Products
iMix ! is Smile Line’s new modeling liquid for porcelain. iMix ! liquid can be used as much for high-fusing as for low-fusing ceramics. The other advantage of iMix ! is the wonderful working comfort provided during porcelain build-up. It ...
SMILE LINE SA
2Seal easymiX Root Canal Sealer on epoxy-amine resin basis in convenient double-chamber mixing syringe. Easy application with interchangeable, flexible intra oral tips. Easy-to-use, safe and fast Always mixed in ideal ratio Can be applied ...
Super Pink Modelling waxes 1,5 mm, 2500 g weight 2,6 kg Quantity: 2500g Super Pink - Modelling wax precise exact reproduction easily moulded shape-stable point of solidification 57°C
GEBDI Dentalproducts GmbH
... it to the dental laboratory even the following Tuesday, without worrying about this having a detrimental effect on the result. As it is scannable, Hydrogum 5 facilitates access to digital workflows and improves communications ...
Zhermack
- Ease of use - Versatility - High aesthetic result even with reduced thickness - Abrasion and breakage resistance - Low bacterial plaque adhesion - Biocompatibility Available colours for dentine, collar and enamel: A1 - A2 - ...
DENTAL MANUFACTURING S.p.A. - Ruthinium Group
SprintRay OnX Tough 2, is a groundbreaking dental 3D printing resin that has received FDA clearance for use in creating fixed hybrid dentures. The resin leverages cutting-edge NanoFusion™ technology, which set a new industry ...
SprintRay
SDC
WAX HORSESHOE FOR BITE REGISTRATION Description Reinforced with gauze from entirely natural wax.
INTERDENT d.o.o.
A solution of the product is intended for use for the removal of the alginate and stone residues from impression trays, accessories for articulators, flasks, spatulas and other instruments. With a lemon scent. The product does not contain ...
INTERDENT d.o.o.
The wax is hard and breakable at room temperature but soft and adapted at the temperature above 40°C. It is suitable for taking bite registration and also for waxing - up in removable prosthetic, especially in warm places.
INTERDENT d.o.o.
Self Curing Allows easy construction or orthodontic appliances using the "salt and pepper" method. Exceptional translucency
KEMDENT ASSOCIATED DENTAL PRODUCTS LTD
... the best choice for high-quality work. Anutex modelling wax sheets are used by the technician to create the preliminary denture base for the dentist to try in the patients mouth. Sheet size: 187mm x 88mm x 1.5mm ...
KEMDENT ASSOCIATED DENTAL PRODUCTS LTD
Tenatex Eco Red Toughened Wax is the latest addition to Kemdent's fine range of modelling waxes. Using new manufacturing techniques, we are able to produce our great quality Tenatex Modelling Wax using 30% less energy than before. Colour: ...
KEMDENT ASSOCIATED DENTAL PRODUCTS LTD
High quality etching gel with an excellent contrast. Available in different packaging. FEATURES Even more efficient High thixotropy, doesn’t flow Ultra-fast and easy rinsing Excellent contrast. Blue or Green translucent gel Very easy ...
ELSODENT
Nano-hybrid, universal composite, BPA-free, no BisGMA, BisEMA, TEGDMA, nor addition of HEMA PURESHADE >>> 3 ELSODENT shades = 16 VITA shades 65% FEATURES & BENEFITS Simplified choice of shades 16 standard VITA shades with only 3 ...
ELSODENT
Nano-hybrid, antero-posterior composite. Formulation without BPA, BisGMA, BisEMA,TEGDMA and with no addition of HEMA |BIO+| FEATURES Doesn’t stick to instruments. Very low shrinkage: 2.2%. High conversion rate: >70%. Excellent polishability. Highly ...
ELSODENT
... much convenient for users to replace printing materials. And together with adjustable parameter LCD, the printer possesses great compatibility with dozens of photosensitive resin materials. These materials ...
... wearing; In addition, there is no discomfort after wearing it. Let’s start with teeth with a gorgeous smile! Advantages 1、High Toughness More tough than PETG and PP materials,long-term protection of ...
... of quality and innovation, are designed to make implant insertion convenient and efficient. Instruments are precision machined from the finest materials available and are compatible with most dental ...
Zirconia is a non-metallic biocompatible material that has been used in medicine for almost forty years. Its wide use in dentistry is relatively recent and is due to its biological and mechanical properties, making it ...
88Dent Lab
Zirconia Aidite Kavo System HT White 70 x 40 x 16 mm - PARALL Zirconia is a non-metallic biocompatible material that has been used in medicine for almost forty years. Its wide use in dentistry is relatively recent and ...
88Dent Lab
... be layered Zirconia compatible with Aidite Amann Girrbach HT White systematics Zirconia is a non-metallic biocompatible material that has been used in medicine for almost forty years. Its wide use in dentistry is relatively ...
88Dent Lab
Flexural strength: 250, 450 MPa
New Frontier of Lithium Disilicate-Based CAD/CAM Blocks Amber® Mill is machinable dental glass-ceramic blocks made of lithium disilicate. Its reinforced mechanical properties and aesthetic values with qualified machinability ...
HASS CORP
Guided Bone Regeneration (GBR) is a procedure that regenerates missing bone prior to the placement of dental implants. This can be accomplished by using bone grafts, biocompatible membranes, and fixation screws. Jeil ...
... PMMA BLANK is developed to be used in milling machines for making temporary restorations, forgingiva formation after placing dental implants and for accurate determination of the occlusal contacts before placing zirconium ...
BILKIM CO. LTD.
The Multi-purpose PERFECTWAX DENTURE WAX is suitable to create preliminary denture base. It is made of the best raw materials to guarantee consistent quality where low melting point, ...
BILKIM CO. LTD.
The finest materials are used to make the POLYWAX DENTURE WAX. The wax. It is perfect for general use for technicians who are looking for easy shaping, carving, modelling properties.
BILKIM CO. LTD.
Your suggestions for improvement:
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining