... To increase the sensitivity for light elements (Na, Mg, Al, Si) analyzer is equipped with a helium purge channel system ( flow rate of 30-45 ml/min at a pressure of 0.5-1 atm). The analyzer has spacious ...
... Compact or remote mounting options Pipe diameters from DN10 to DN150 Measurement range from 0.1-600 m3/hr PTFE or PFA linings, 316 stainless steel, Hastelloy C, Titanium or Tantalum electrodes DIN or Tri-clamp process connection 4-20mA current, ...
... measuring results from the installed analysers are available as standardised, isolated 4-20mA analogue signals and also as a digital Modbus® communication. The flow through each individual analyser is ...
... The most cost-effective BioFlux system The BioFlux EZ can run up to 6 simultaneous flow cell experiments and is ideal for platelet aggregation, leukocyte adhesion, and biofilm analysis. It works with your existing inverted microscope ...
Fluxion Biosciences
... to its rapid response time, small sample flow requirements and long-term stability. Presentation Fast response end-tidal Carbon Dioxide monitor for small animals, the CAPSTAR-100 Carbon Dioxide Analyzer provides ...
... This blood pressure simulator is mainly composed of pressure tester and sensor. Blood SIM is used for fluid pressure test of human blood flow simulation device. This blood pressure simulation equipment can arbitrarily ...
The respiratory simulator is used with the Inhaled Drug Testing Equipment. It provides a simulated respiratory function for inhalant aerosol, spray, powder, and liquid preparation. This device meets the requirements of the Chinese Pharmacopoeia (2020 ...
... The Capstar-100 Carbon Dioxide Analyzer provides continuous measurement of expired CO2 over the range 0-10 percent. Its rapid response time, small sample flow requirements, and long-term stability make it ideal for respiratory ...
... FlowTrax® IV Pump Analyser provides the fastest tests results of any analyser with a market-best measurement sensitivity of 0.8 microliters. Test results are achieved in a remarkable 3 minutes or less within a 1% accuracy ...
... Laboratory safety showers should be tested once a month to check the functionality and the requested water flow rate of 60 l/min in an emergency case. This mobile test unit provides a very convenient and easy solution to test your body ...
... Lab photometer with a flow of 32 degrees through the cell for end point, kinetic, fixed time and multi-standard tests. 200 methods stored. Pre-adjusted internal Peltier element at 25/30/37 C. Featuring a graphical display, printer and ...
... Aerosol of paraffin oil droplets, optionally aerosol of sodium chloride particles Flow control via a precision mass flow controller Monitoring of the pressure across the test filter Unique sample holding design for ...
... Multitest analyzer LB-10MTA is a tabletop unit with quality control for normal and abnormal values, automatic statistics and analysis of control data. Features built-in thermal printer for permanent printing by thermal wax transfer. Provision ...
... . This ventilator tester is designed to measure air, oxygen, and nitrous oxide flow and pressure in institutional, home care, field service, laboratory, and production applications. The compact size makes the TSI ventilator ...
... also suitable for all sterile applications MEGE Laminar Flow Unit is produced from stainless steel which is resistant to abrasive effect of desinfectants. At the center of the MEGE Laminar Flow Unit, a large mounting ...
... This system is a set of ultra-high-throughput automatic nucleic acid testing system that can truly realize “sample in - result out”. The system integrates an ultra-high-throughput sample preparation system CDS-600, as well as multiple ...
the best suppliers