Vacuum regulators

... plastic to not only protect the controller, but also to reduce corrosion risks. Vacuum levels can be reset to pre-adjustable levels using the on and off switch. The vacuum DIN probe can be connected directly ...

The VR-I-W series of vacuum regulators are the latest type in the AmcareMed vacuum regulator. The face cover of the regulators are made of ABS and is ...

Venturi Type Vacuum Regulator The Venturi type vacuum regulator is a device that converts compressor air or oxygen into the suction source, suitable for hospitals that ...

... outside of the regulator body, 360-degree swivel. Available in a variety of inlet adapter. Include OHMEDA, DISS, CHEMETRON, FRENCH, BRITISH, DIN Standard. Vacuum trap prevents overflow of waste fluid ...

... ÷ 50 ° C. The storage conditions: humidity: max. 70% temperature: -40 to 60 ° C Accessories cooperating with the regulator vacuum A45, which can be purchased in addition to: Collection container: ...

Features •The gauge is located inside the regulator body. •Accurate suction control within ±10%. •Quick switch between modes: Reg/Off/Full vacuum, •Clear Analog Display of the 2 1/2" pressure gauge. •Constant ...

EP-IL60 Inline Regulator (0–60 PSI Output) EP-IL60 Inline CO2 Regulator 0 – 60 PSI Output For use with house gas supply – not for use with cylinders. Provides consistent set pressure to CO2 equipment ...

Vacuum cleaners for coupling to an electrical vacuum aspirator for murals and surgical wards.

It has Type SL 40 Vacuum Regulation with Valve direct compl.

... high suction model for additional safety Supplied with BactiTrap® anti-bacterial filter Direct or remote connector options Vacuum adjustment and separate on/off switch Twin unit available Twin suction unit available

Alize is a vacuum regulator that is used to accurately adjust suction from a hospital pipeline vacuum system. It enables fluids and secretop,s from the patient to be extracted safely ...

MediEvac+ is a vacuum regulator system, which allows the user efficiently and safely control suction therapy. Compact and lightweight medical vacuum regulator system ...

The VACUSILL® 2HV high vacuum regulators are medical devices that are powered by a vacuum source of 120 L/min – 80 kPa, has a calibration adjustment mechanism that helps to achieve extraordinary ...

The all new SMP 3-Mode Continuous Vacuum Regulator is the latest edition to SMP’s line of vacuum regulators offering users an innovative body style. Aside from being ...

Single high VAC regulator Single high VAC regulator with integrated ON/OFF valve Item no. 32005-00

... VAC HV vacuum regulators allow the controlled continuous aspiration of secretions in tracheal and pharingeal ways during surgical procedures and during continuous nasogastric drainage. A Venturi-system ...

... recommended to get a complete suction device able to guarantee total protection of the vacuum regulator and plant. The small sizes of the EasyVAC® PLUS vacuum regulators ...

Color Standard: Domestic (ANSI) Gauge: Digital Type: Adult Mode: Continuous 2-Mode Standard (0-300 mmHg) Body Color: Off-White Source/Wall Connection: No Fitting - 1/8" NPTF Patient Connection: No Fitting - 1/8" NPTF

... Continuous-only Suction Regulators are light-weight, portable, and rugged. It is available in four vacuum ranges: 0-160, 0-200, 0-300, and 0-760 mmHg. This regulator features three modes ...

... acc. to DIN 13260-2 or to be mounted on device-holding rail 25 x 10 mm (other rail dimensions upon request) - Connection on vacuum side: screw cap 9/16" for a hose nozzle or a secretion-collecting jar - Neutral colour available

These suction regulators from BeaconMedaes are made with cast metal backplates and are used with encased gauges to protect the unit and to get all sorts of stresses under control. This makes it so the plastic regulator ...

The vacuum regulator is used to measure and adjust the vacuum level within the context of medical suction. It enables to drain substances out of the patient's body during surgical procedures. ...

Description: Regulates the flow rate of vacuum and provides the connection between gas outlets and medical devices. Technical Specifications: Product Code : MG-GAMV-y “y: B(BS), D(DIN), F(Afnor)” Product Name : Vacuum ...

GVAC705 High vacuum regulatorFor fluid apiration.Adjustable aspiration in vacuum systems.Technical CharacteristicsClass: IIAScale: 0-1000 mbarMaximum aspiration flow: 70 l/min

Product Code: MS 70316Weight: 500 GrProduct Norm: DIN, BS, AF Noman

The Vacuum regulators are conceived and realized according with MDD 93/42/EEC.The suction regulators are basically composed by one vacuum regulator and ...