Adult examination table K series

manualfixed-heightwith adjustable backrest

Overview
The combined multi-function examination tables are available with a fixed table height. The extensive range of accessories included in the scope of delivery guarantees use in many areas of medicine.

Combined multi-function examination tables with fixed height and three-section tabletop
These combined multi-function examination tables with fixed height are used for general medical and lithotomy examinations thanks to the three upholstery segments (headrest, backrest and footrest), which can be adjusted and set independently of each other, and the accessories supplied (leg holders, fastening clamps and stainless steel tray).

Frame finishes / Article numbers

• Lacquered — Article No.: K-1065/3
• Chrome-plated — Article No.: K-2065/3
• Stainless steel — Article No.: K-3065/3

Available table heights
To better accommodate the various body sizes of the users, these multi-function examination tables are available in four different heights (650 mm, 700 mm, 750 mm and 800 mm) at no extra charge. If no table height is specified when the order is placed, the table will be supplied at a height of 650 mm.

Features

• Stability and robustness achieved by gusset plates in the frame corners and crossbars between the legs.
• Tubular steel frames available as:
  • Lacquered blank steel (K-1065/3)
  • Chrome-plated blank steel (K-2065/3)
  • Stainless steel (K-3065/3)
• Table leg ends fitted with floor protectors (impact caps).
• Three upholstery segments (head, middle, foot) with a thickness of 64 mm each.
• Foot end has cutouts in the upholstery and upholstery frame; a stainless steel tray (300 x 200 x 65 mm L x W x H) is located in this area.
• Continuous adjustment of head, middle and foot sections with locking via clamping handles and clamping rod mechanisms.

Standard version includes

• A pair of leg holders with plastic shells.
• A pair of fastening clamps.
• Cutouts in the foot section and upholstery frame.
• A stainless steel tray with holder.
• Table legs with floor protectors (impact caps).

Technical details
Combined multi-function examination tables
Article number: K-1065/3 | K-2065/3 | K-3065/3
Frame: Lacquered | Chrome | stainless steel
Length (Head/back/foot section): 1,900 mm
Head/back/foot section dimensions: 500 / 1,050 / 350 mm
Width: 650 mm
Heights (without surcharge): 650 / 700 / 750 / 800 mm
Upholstery segments: 3 sections
Upholstery thickness: 64 mm
Head section adjustment: +40° (clamping rods)
Back section adjustment: +30° (clamping rods)
Foot section adjustment: +30° (clamping rods)
Load capacity: 200 kg

Accessories & additional options (selection)

• BHG-600 — Göpel leg rests (pair) with spherical joints, rods with two 90° bends, chrome-plated, Ø 18 mm, black PU-foam shells, includes straps with Velcro closure (a pair of fastening clamps for standard rails required).
• GS-1710 / EfGS — Face cut-out in the headrest, oval, approx. 205 x 105 mm; upholstery insert for closing the face opening, approx. 200 x 100 mm (retrofitting not possible).
• INF-1720/VA — Infusion holder in CrNi steel, bottle cross with 4 hooks, infusion pole 1,700 mm long, Ø 18 mm; includes screw-on fastening clamp for left or right side of the upholstery frame (specify when ordering; retrofitting limited).
• LR-75 / LR-125 — Set of castors Ø 75 mm or Ø 125 mm; four swivel castors, two fully lockable.
• LR/Z-125 — Central locking castor system, double swivel castors Ø 125 mm with connecting rods and diagonally arranged foot pedals (table ready/move = green, table locked = red); retrofitting not possible.
• NF-30 — Levelling feet set (4 pieces), impact caps with levelling feet for square steel tube 30 x 30 mm.
• P-2065 — Paper roll holder, chrome-plated, consisting of two brackets, two clamps and a paper roll holder bar (length 615 mm, Ø 20 x 1 mm) for mounting on table legs.
• RRH-65 — Rectoscopy roll, height-adjustable, dimensions 650 x 65 x 550 mm (W x D x H), holder for fastening clamps Ø 18 mm, chrome-plated rods, upholstered with synthetic leather for knee-elbow position (retrofitting not possible).
• Other available accessories: headrest adjustment by gas pressure spring, all-around edge/impact protection, positioning aids, patient belts, standard surgical rails in various lengths, pivoting and removable side guards, additional castor systems.

Product variants & gallery notes
Examples of product variants shown include K-1065/3 (pure white frame, ice upholstery) and K-2065/3IR (chrome frame, baltic upholstery). Photographs illustrate different article numbers and optional integrated accessories such as rectoscopy roll.

Caractéristiques / spécifications techniques

• Product family: Combined multi-function examination tables
• Configuration: 3-section tabletop (head, back, foot)
• Tabletop total length: 1,900 mm
• Section lengths: Head 500 mm / Back 1,050 mm / Foot 350 mm
• Upholstery thickness: 64 mm per section
• Upholstery segments: 3
• Width: 650 mm
• Available fixed heights: 650 mm (standard) / 700 mm / 750 mm / 800 mm
• Head adjustment: +40° (clamping rods)
• Back adjustment: +30° (clamping rods)
• Foot adjustment: +30° (clamping rods)
• Load capacity: 200 kg
• Frame options: lacquered, chrome-plated, stainless steel
• Included accessories in standard delivery: leg holders, fastening clamps, stainless steel tray (300 x 200 x 65 mm), floor protectors on table legs
• Optional accessories: castors (Ø 75/125 mm), central locking castor system, infusion holder, paper roll holder, rectoscopy roll, levelling feet and other positioning aids