Resin dental material VarseoSmile® Temp

for dental onlaysfor 3D printingfor dental veneers

Product overview
VarseoSmile® Temp — tooth‑colored resin for 3D printing of temporary crowns, bridges, inlays, onlays and veneers; indications up to 7‑unit bridges (max. one pontic width).

Advantages for the laboratory

• Optimized printing and processing parameters for accurate fit and reproducible workflows.
• Smooth printed surfaces enable easy finishing.
• Supports a wide range of indications up to 7‑unit bridges.
• Printed parts can be supplemented or repaired with VarseoSmile Temp or reprinted at low material cost.
• Short fabrication times and low material consumption for cost‑effective production.
• Available in VITA classical shades A2, A3, C2 and BL.
• FDA 510(k) cleared; meets US Class II medical device requirements.

Advantages for the patient

• Restorations can be cemented with conventional temporary cements.
• High biocompatibility — not cytotoxic, not genotoxic, non‑irritating and non‑sensitizing.
• Aesthetic temporaries with up to 12 months wear time.

Downloads (available documents related to the product)

• The BEGO Varseo Resins (for Dental 3D Printing)
• VarseoSmile Temp — Instructions for use (also valid for Asiga MAX UV)
• Safety data sheet VarseoSmile Temp

Product details
Color: A2, A3, C2, BL
Density: approx. 1.4–1.5 g/cm³
Viscosity: 2,500–6,000 mPa·s
Flexural strength: ≥ 100 MPa

Availability (selection)
VarseoSmile Temp A2 — 500 g bottle — REF 41022; A3 — REF 41023; C2 — REF 41024; BL — REF 41026; VarioSeal: 250 g bottle — REF 41102/41103/41104/41106 (corresponding shades).

Technical specifications

• Indications: temporary crowns and bridges, inlays, onlays, veneers; up to 7‑unit bridges (max. one pontic width).
• Shades: A2, A3, C2, BL (VITA classical).
• Density: approx. 1.4–1.5 g/cm³.
• Viscosity: 2,500–6,000 mPa·s.
• Flexural strength: ≥ 100 MPa.
• Packaging: 500 g and 250 g bottles (250 g recommended for Varseo XS printer).
• Performance: smooth surfaces, easy finishing, repairable/supplementable prints, low material consumption, short fabrication times.
• Biocompatibility: not cytotoxic, not genotoxic, non‑irritating, non‑sensitizing.
• Regulatory: FDA 510(k) cleared; meets requirements for Class II medical device (US).