Medical gas pressure regulator HG160OXNAAFN

medicaltwo-stage

The 2nd stage unit is made of cast chemically nickel-plated brass; the regulator body has two decompression lines with two EURO/A regulators connected in by-pass through four ball valves, two on the inlet and two on the outlet of the same; one pressure gauge measures the pressure upstream of the regulators and another pressure gauge with electrical contacts measures the outlet pressure.All the valve seats and pressure gauges are fitted with check valves to prevent gas leaks when servicing.The inlet and outlet connections are made using a Ø16 mm weld-on pipe. The unit also has a block for physical disconnection. N.One regulator body made of cast CW614N chemically nickel-plated brass. N.One Ø16 mm weld-on pipe inlet connection. N.One Ø16 mm weld-on pipe outlet connection. N.One stainless steel filter. N.Two shut-off valves upstream of each regulator with check valves. N.Two shut-off valves downstream of each regulator with check valves. N.One emergency gas-specific socket. N.One block for physical disconnection. N.One pressure gauge to show system pressure, range 0-16 bar, class 2.5. N.One pressure gauge with contacts that measures the outlet pressure, range 0-16 bar, with 3.8 bar and 5.6 bar threshold, class 2.5. Stainless steel springs. VITON or NBR membrane. VULKOLLAN regulator seat ring. EN ISO 10524-2 | EN ISO 7396-1 | NF S 90-116 | UNI 9507 | EN ISO 15001 | EN ISO 18082