Albumin reagent kit ALB-10 series

preservativefor biochemistrydiagnostic

For the in vitro quantitative determination of albumin concentration in serum. METHODOLOGY At a controlled pH, bromcresol green forms a colored complex with albumin. The intensity of color at 630 nm is directly proportional to albumin content. The instantaneous initial absorbance is obtained as suggested by Webster PRINCIPLE Controlled pH BCG+ ALBUMIN Green BCG/ALBUMIN Complex REAGENT COMPOSITION Active Ingredients Concentrations Bromcresol green 0,25 mM Succinat Buffer 85 mM Surfactant PH 4.20 ± 0.1 PRECAUTIONS 1. For in vitro diagnostic use only. 2. DO NOT pipette by mouth. Avoid contact with skin and eyes. If spilt, thoroughly, wash affected areas with water. 3. Reagent contains Sodium Azide as a preservative. This may react with copper or lead plumbing to form explosive metal azides. Upon disposal, flush with large amounts of water to prevent azide build up. 4. Do not use the reagent after the expiration date printed on the kit. R37/38 Irritation to respiratory system and skin. R41 Causes serious eye damage In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear eye/face protection. REAGENT PREPARATION Reagent is supplied ready to use. REAGENT STORAGE Store reagent at room temperature. (2-25˚C) REAGENT DETERIORATION The reagent should not be used if: 1. The reagent is turbid. 2. The reagent fails to meet stated parameters of performance SPECIMEN COLLECTION AND HANDLING Collection: - No special preparation of the patient is necessary and sample preservatives are not required.