Operating room GLASS

modularmedicalstainless steel

TECHNICAL PARAMETER 01 Double-layer gold crystal ultra-whitetempered glass,thickness can be customized,5mm/6mm 02 High-quality double-layer 0.8EVA film,innerinterlayer UV high-definition lamp,high colorreduction,aging resistance and anti-fading 03Interlayer UV can be customized accordingto color card or customized high-definitionprinting graphics and text 04Concealed rear projection atmosphere lightbox,atmosphere light supports RGB colorfuldynamic output,and can customize theanimation effect of illusion color light 07Diversified structure,issued comprehensiveand deepened installation and process plans,and connected with various constructionplans 08Design and construction drawings includekeel assembly or welding details 09The installation scheme of wall glass canadopt calcium silicate plate back adhesivebonding or electrolytic steel plate foamingbonding and then on-site hanging platewelding 10Fully consider the site effect and support theoverall color matching design of supportingequipment cabinets WALL PANEL CHARACTERISTICS 01 Install the laminar flow hood in theoperating room 1.Assemble the box and face frame on site,and keepthe box insulated 2.Punch the hanging bars and install the hanging barsand basket screws 3.Box hoisting4.The box is connected with the air duct5.A clearance of 100MM shall be reserved betweenthe box and the ceiling plate for the installation of theceiling plate6.After the panel is assembled,it is placed in theoperating room for later installation 02 Install the ceiling plate 1.Positioning and welding of keel and angle iron; 2.Hang electrolytic steel plate ceiling plate andconduct spot welding for reinforcement