Microscope camera MAGUS CDF50

digitalfull HD1920 x 1080

Full color camera with SONY Exmor 2.1MP digital CMOS sensor. The sensor is manufactured using back-illumination technology to reduce light scattering and increase the matrix sensitivity (8935mV at 1/30s). The camera produces bright and clear images even in low light. Designed to work in darkfield and brightfield using objectives with a magnification of 40x, 60x, and 100x. The camera can be mounted on a microscope in two ways: into the trinocular tube via a C-mount adapter or in place of the eyepiece in the tube using an adapter and adapter rings. It is recommended to use an adapter with a magnification from 0.6x to 0.9x with the camera, which will give the widest possible field of view without distortion. After installation, the camera connects to a computer via a USB3.0 port with a data transfer speed of 5Gbps. MAGUS View software is used to display images on the monitor, capture photos and videos, and for carrying out other actions. The package includes a disk with software and drivers. Please note: Before starting, the software must be calibrated for each objective you use. For this, you will need a special calibration slide (not included). The image is displayed on the monitor in Full HD 1920x1080px format with a frame rate of 96fps. The frames transition is smooth, without delays, and so the camera can be used to observe moving objects, including demonstrations during lectures or scientific presentations. Key features: 2.1'' backlit CMOS sensor, high matrix sensitivity Suitable for darkfield or brightfield studies with 40x, 60x, and 100x objectives Installed into the trinocular tube or in the eyepiece tube of a microscope