Components for Anchor Kit
•Distinguish the length aize by the numbers of Line marking
•Connect through Trox Tip
• Conncct through Hand & I tond Dnver
How to use Anchor Kit?
Whon it is possible to got stability from noighboring toeth. (No noed to use the Anchor kit)
Race the R2GATE Guide™ by placing it onto the neighboring teeth.
When it is hard to got stability from fulfy Gdentulcxis case or noighboring teeth.
1.Fix the R2GATE Guide™ temporariy by askhg patient to bite the R2GATE Guide™ uang a resn or other toots.
2.Rease use the Pin that R2GATE™ program selected, and place that Rn on the Driver Tip.
3.Insert the Pin into the R2GATE Guide™ that the patient is bithg, and tum it into dockwise to the R2GATE Guide™ to bone.
‘Make a hole on the Guide using 02.0 Drill if a density of the bone is high. Then, insert the Anchor R'n into the hole.
-When it is neoessary to re-imptent
a fixtue after separathg the R2GATE Guide™.
-When the stability of the R2GATE Guide™ is woak ovon though al piannod Anchor Rns are used (This is only for the cases with edentubus jaws and implantations of three or more fixtures).
* Cases for re-implant a fixture after failure
1.Check the condition of an implanted fixture after a séparation of a R2GATE Guide™. Evulse the fixture when the implantation is considered as a failure for lack of stabiSty or a path is inaccurate.
2.Replace the R2GATE Guide™. Insert the R2GATE Guide™ Anchor to the R2GATE Guide™ Hole of the neighboring fixture, and place the R2GATE Guide™ by turning it into clockwise.