CO2 laboratory incubator ICO105

for cell culturesfor healthcare facilitiesfloor-standing

<b>Overview</b><br>Controlled CO2 incubation for reproducible cell culture workflows. Precise temperature, CO2 and humidity management, hygienic design and networked control suited to laboratory and clinical environments.<br><br><b>Range of functions</b><br>Calibration: Three freely selectable setpoints: temperature, humidity and CO2<br>Interfaces: USB‑C; Ethernet LAN<br>Timer: Immediate start; SetpointWAIT (process time starts after all setpoints reached); Timer on Event (starts at defined time)<br>Language options: English (default), German, French, Spanish, Portuguese, Chinese, Arabic, Hindi, Polish, Czech, Hungarian, Russian, Italian, Serbian<br>Device functions: Date/time (time zones, summer/winter time); Display brightness; DistanceView (1–4 selectable parameters); Network settings (IP, subnet, DHCP); Language and buzzer settings; Power‑failure behaviour; Timer functions<br>Adjustable parameters: Temperature; CO2; Humidity (option K7); O2 (option T6)<br>Control unit: 6.86" IPS multi‑touch display (480 × 1280 px) showing actual/setpoint values and parameter curves.<br><br><b>O2 (with option T6)</b><br>Control: Anaerobic O2 control via filtered N2 inlet. Zirconium‑oxide sensor with monitoring and error display.<br>Adjustment precision: 0.1 %<br>Setting range: 1–20 % O2<br><br><b>Temperature</b><br>Heating: Large-area multi-zone all‑round heating with additional door, seal and rear heating<br>Setting range: +20 to +50 °C<br>Operating range: from 5 °C above ambient up to +50 °C<br>Sterilisation programme: 60 min at 180 °C (sensors may remain installed)<br>Setting accuracy: 0.1 °C<br>Spatial variation at 37 °C: ±0.3 K<br>Temporal fluctuation at 37 °C: ±0.1 K<br><br><b>Humidity</b><br>Humidification: Passive water tank with condensate return; Peltier element for humidity limitation. Option K7: active closed‑loop control with capacitive sensor. Humidification via self‑priming micro‑dosing pump with hot steam; dehumidification via diaphragm pump.<br>Accuracy (K7): 0.5 % RH<br>Setting range: 40–98 % RH and rh‑Off<br><br><b>CO2</b><br>Control: Dual‑beam NDIR CO2 sensor with integrated monitoring and pressure‑compensated measurement. Filtered CO2 supply.<br>Temporal fluctuation: ±0.2 %<br>Setting range: 0–20 % CO2<br><br><b>Safety</b><br>Power failure modes: Manual and program behaviours with retained parameters and defined continuation/query logic depending on duration<br>Temperature monitoring: Dual Pt1000 sensors DIN Class A with mutual monitoring and automatic takeover on fault<br>Alarms: visual and acoustic<br><br><b>Standard equipment</b><br>Standard option: Door‑open detection (V5)<br>Factory calibration certificates: various options (Standard / K7 / T6) for +37 °C, 5 % CO2, 90 % RH and O2 where applicable<br>Accessories: CO2 connection set, hoses and clamps; water tank (B38737); stored sterilisation programme 60 min at +180 °C<br>Door: Insulated stainless steel door with 2‑point compression lock<br>Inner door: Glass inner door with Ø 8 mm sampling opening<br>Internals: 1 perforated stainless steel shelf (max. 5 positions)<br><br><b>Stainless steel interior</b><br>Internal dimensions (W × H × D): 560 × 480 × 400 mm<br>Inner cover: 37.5 mm<br>Volume: 108 L<br>Max. internals: 5<br>Max. chamber load: 75 kg<br>Max. load per internal: 15 kg<br><br><b>Textured stainless steel casing</b><br>External dimensions (W × H × D): 708 × 683 × 589 mm<br>Installation: 4 adjustable feet<br><br><b>Electrical data</b><br>230 V, 50/60 Hz — approx. 1300 W<br>115 V, 50/60 Hz — approx. 1300 W<br><br><b>Ambient conditions</b><br>Clearances: Rear ≥ 15 cm; Top ≥ 20 cm; Sides ≥ 5 cm<br>Ambient temperature: 10–35 °C<br>Max. installation altitude: 2000 m<br>Overvoltage category: II<br>Pollution degree: 2<br><br><b>Packing / shipping data</b><br>Transport: Unit must be transported upright<br>Customs tariff number: 8419 8998<br>Country of origin: Germany<br>WEEE‑Reg. No.: DE 66812464<br>Packaging dimensions (W × H × D): 825 × 967 × 815 mm<br>Net weight: approx. 70 kg<br>Gross weight: approx. 85 kg<br><br><b>Certifications</b><br>Standard units are safety‑approved and bear the CE mark<br><br><b>Technical specifications</b><br><ul><li>Brand: Memmert</li><li>Model: ICO105</li><li>Product type: CO2 incubator</li><li>Internal volume: 108 L</li><li>Internal dimensions (W × H × D): 560 × 480 × 400 mm</li><li>External dimensions (W × H × D): 708 × 683 × 589 mm</li><li>Temperature setting range: +20 to +50 °C</li><li>Temperature accuracy: 0.1 °C</li><li>Temperature variation at 37 °C: ±0.3 K</li><li>CO2 setting range: 0–20 %; temporal fluctuation ±0.2 %</li><li>Humidity setting range: 40–98 % RH (rh‑Off); accuracy 0.5 % RH (option K7)</li><li>O2 control (option T6): 1–20 %, precision 0.1 %</li><li>Control/display: 6.86" IPS multi‑touch (480 × 1280 px)</li><li>Power: 230/115 V, ≈1300 W</li><li>Net weight: ≈70 kg; max. chamber load 75 kg</li><li>Standard shelf: 1 perforated stainless steel shelf (max. 5 positions)</li><li>Country of origin: Germany</li></ul>