Laboratory vaporizer Turbo II™ 2852NP

MSP's Turbo II™ Vaporizer 2852NP is designed for applications that require low to mid vapor flow rates. Based off of the field proven, highly reliable, and low-maintenance MSP Turbo™ Vaporizers, the new 2852NP provides stable vapor concentrations while maintaining a very small footprint. The 2852NP also has a liquid shut-off valve, and can be used with any liquid flow controller that has an integrated flow control valve. - Dimensions: 190 mm x 84 mm x 114 mm (7.5'' x 3.3'' x 4.5'') - Weight: 2.5 kg (5.6 lb) - Fittings: Carrier Gas Inlet - 1/4 in. VCR female split nut, Liquid Inlet - 1/8 in. VCR female, Vapor Outlet - 1/4 in. VCR female split nut, Compressed Air - 4 mm instant tube fitting - Wetted Parts: SS 316, PEEK, Elgiloy®, Nickel - Leak Integrity: ≤ 1x 10^-8 Pa·m^3/s Helium - Heater Power Requirements: 208 VAC, 60 Hz, 450 W - Carrier Gas: Inert gas recommended - Max Carrier Gas Flow: 2.0 standard liters/min N2 @ 50 psig - Max Liquid Flow: 7 g/min (TEOS or equivalent) - System Pressure Limit: 150 psig - Compressed Air: 90 to 110 psig - Temperature Range: 40°C to 180°C - Temperature Sensor: 2 type Ƙ thermocouples - Accessories: Power cable included (3 m). AMP CPC, 4 pin connector with 3 flying leads on opposite end Specifications subject to change without notice. Max Carrier Flow, Heater Power (W) and Line Voltage are factory adjustable, visit www.tsi.com/contact to request more information. Max. liquid flow is process dependent. The spec assumes a vaporizer temperature of 180°C, max. carrier gas flow and pressure <50 Torr immediately downstream of the vaporizer. Appropriate venting is required.