Ceramic dental material VITABLOCS® Mark II

CAD/CAMfor dental onlaysfor dental inlays

Product overview
VITABLOCS® Mark II are monochromatic, tooth‑coloured feldspar CAD/CAM blanks designed for fabrication of aesthetic single‑tooth restorations (inlays, onlays, partial crowns) and available in multiple geometries and shades.

Key benefits

• Material: Feldspar ceramic blanks suitable for chairside and laboratory CAD/CAM workflows.
• Aesthetics: Tooth‑coloured, monochromatic shades offering natural shade and light interaction.
• Workflow efficiency: Polishable restorations without additional firing; supports time‑saving fabrication.

Indications

• Inlay
• Onlay
• Partial crown

These are recommended indications; in practice the full range of single‑tooth restorations can normally be fabricated when used according to the instructions for use.

System compatibility (examples)
System solutions

• CEREC/inLab (Dentsply Sirona)
• PlanMill 40 / PlanMill 40S / PlanMill 50S (Planmeca)

Universal solutions

• Arum Dental (5x series)
• CORiTEC Series (imes‑icore GmbH)
• DGSHAPE DWX‑4W (DGSHAPE Corporation)
• CS 3000 / CS3100 (Carestream Dental, Inc.)
• N4 / R5 / S1 / S2 / Z4 (vhf camfacture AG)
• Zfx Inhouse5x (Zfx GmbH)
• Organical Desktop Series (R+K CAD/CAM Technologie GmbH & Co. KG)
• DMG ULTRASONIC Series (DMG Mori AG)

Selected product references and dimensions (examples)
A1C, I-10 | EC4A1CI105 | 8 x 10 x 15 mm
A1C, I-12 | EC4A1CI125 | 10 x 12 x 15 mm
A1C, I-14 | EC4A1CI14 | 12 x 14 x 18 mm
A3.5C, I-12 | EC4A35CI125 | 10 x 12 x 15 mm
1M1C, I-40/19 | EC41M1CI40192 | 15.5 x 19 x 39 mm
0M1C, I-10 (UNIVERSAL) | EN1M0202360 | 8 x 10 x 15 mm

Technical specifications

• Material type: Monochromatic tooth‑coloured feldspar ceramic blanks for CAD/CAM single‑tooth restorations.
• Available shades: VITA classical A1–D4® and VITA SYSTEM 3D‑MASTER® shades and additional M‑series variants.
• Geometries: Multiple block sizes (e.g. 8 x 10 x 15 mm, 10 x 12 x 15 mm, 12 x 14 x 18 mm, RLT formats up to 15.5 x 19 x 39 mm).
• Packaging: Pack variants (examples: 2 pcs. RLT, 5 pcs. packs for many shade/size combinations).
• Processing: Millable, finishable and polishable without additional firing in typical CAD/CAM workflows.
• Compatibility: Specific holders for some systems and universal holder variants for broad CAD/CAM compatibility.

Notes
Follow the product‑specific instructions for use for indications, processing parameters and system‑specific requirements. Availability of shades, geometries and holder systems may vary by CAD/CAM partner.