Laboratory bottle-top dispenser simplex² fix

multipurposefixed-volume

Product overview
VITLAB® simplex² fix dispensers are practically universally applicable and can be used with many organic and inorganic solutions. The materials that come into contact with media (borosilicate glass, Al2O3 ceramics, FEP, ETFE, PFA, PTFE, platinum iridium and PP) are resistant to most acids, solvents and bases. The simple-to-use calibration function helps meet requirements for test equipment monitoring with minimal downtime.

Safety and design features
The screwable discharge valve is equipped with an additional safety bulb and closes the dosing channel if the dispensing tube is not installed so that no medium can escape. The dispensers are equipped with a positive displacement piston and a fluoroplastic (PFA) sealing lip on the cylinder wall; this sealing lip acts like a windscreen wiper to prevent crystal build-up on the cylinder wall from readily crystallisable media. The glass cylinder is additionally coated with a plastic material to reduce the risk of splashes should breakage occur. The telescopic filling tube can be adjusted smoothly to different bottle heights.

Sterilisation
VITLAB® simplex² fix dispensers are completely autoclavable at 121 °C (2 bar) according to DIN EN 285.

Included in delivery

• VITLAB® simplex² fix (GL 45 thread)
• 5 thread adapters* made of PP
• Telescopic filling tube
• Mounting tool
• Quality certificate
• Operating manual

Recommended applications
Recommended applications for VITLAB® genius², simplex² and simplex² fix. See available downloads for detailed application ranges and instructions.

Types / Sizes (table)
Volume ml | Graduation ml | A ≤ ± % | Accuracy ≤ ± µl | CV ≤ % | PU | Cat. No.
1,0 | - | 0,5 | 10 | 0,1 | 1 | 1622502
5,0 | - | 0,5 | 25 | 0,1 | 1 | 1622504
10,0 | - | 0,5 | 50 | 0,1 | 1 | 1622505

Notes
* Nominal volume 1 - 10 ml: with adapters GL 25, GL 28, GL 32, GL 38, S 40 and telescopic intake tube (length 125 - 240 mm). Accuracy and coefficient of variation according to DIN EN ISO 8655-5, related to the nominal (maximum) volume marked on the device where the device, environment and distilled H2O are at the same temperature (20 °C). Checks are done in accordance with DIN EN ISO 8655-6 with the device filled to capacity and with uniform and jolt-free dosing.

Technical specifications

• Materials in contact with media: borosilicate glass, Al2O3 ceramics, FEP, ETFE, PFA, PTFE, platinum iridium, PP
• Positive displacement piston design
• PFA sealing lip on cylinder wall (prevents crystal build-up)
• Glass cylinder coated with plastic splash-protection
• Screwable discharge valve with safety bulb to close dosing channel when dispensing tube not installed
• Telescopic filling tube, adjustable for different bottle heights (125 - 240 mm)
• Autoclavable at 121 °C (2 bar) according to DIN EN 285
• Calibration function for test equipment monitoring
• Available with DAkkS calibration certificate or individual certificate
• Available volumes and catalog numbers: see Types / Sizes table above