dental laboratory saw
SlitPrecise SP100

Add to MyMedicalExpo favorites
Compare this product Don’t compare this product
dental laboratory saw dental laboratory saw - SlitPrecise SP100
{{requestButtons}}

Description

SLITPRECISE SP100
New generation of model saw for plaster models

laser guidance of the cutting
cutting from the bottom up
connection to aspiration unit is possible
specialized safety system during cutting operation
Accessories:

diamond disk DFS Ref. № 110000001
diamond disk Nuova Ref. № 110000002
TECHNICAL DATA
POWER SUPPLY110/230V ±10%,50/60HZ
POWER CONSUMPTION200W
MAXIMUM REVOLUTIONS10000 RPM
MAXIMUM DEPTH OF THE CUT26,5 MM
WIDTH OF THE CUT0,3 MM
DIAMOND CUTTING DISKФ85ХФ16Х0,3
LASERCLASS 2
DIMENSIONS
W/D/H290X320X170 MM
WEIGHT10КG
Thank you for having purchased the separator for
plaster models SLITPRECISE SP100 furnace which, we are
sure will all meet all your needs and will satisfy your high
demands.
This device has been designed according to the
requirements of latest industrial standards and we
guarantee that you will use it many years as your closest
assistant.
However, inappropriate use may damage the
equipment and be harmful to personnel. Please observe
the relevant safety instructions and read the Operating
Instructions carefully.
We wish you pleasant and fruitful work with the
separator for plaster models SLITPRECISE SP100.
The following instructions must be observed in order
to avoid personnel injury or equipment failure.
CAUTION!
 the device must not be run by an operator who
is not acquainted with these instructions;
 before turning on the plug in the net contact
check if the voltage in the electrical network
correspond to the working tension. In case of
discrepancy, consult a specialist;
on no account do not alter the device;
 the notices and stickers must be kept in good
condition so that they are easily readable; they
should not be removed

Other VOP products