- Dental >
- Dental practice >
- Dental restoration material >
- Zirkonzahn
Zirkonzahn dental restoration materials
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... Dispersive® is a polychromatic and highly translucent zirconia material with a merging colour gradient for the manufacture of single crowns, inlays, onlays, veneers up to 3-unit bridges. The new material ...
Zirkonzahn
Flexural strength: 92 MPa
... shrinkage values for highly stable printed results, which can be cleaned with water in an ultrasonic bath. Not approved for intraoral use.
Zirkonzahn
Colour Liquid for ICE Zirkon Translucent for dipping technique Our recommendation: Using metal-free tweezers!
Zirkonzahn
With the colouring liquid Colour Liquid Prettau® Aquarell Translucent it is now possible to colour monolithic or reduced zirconia structures, in order to increase the translucency in the incisal area. To obtain a dentine base colour, ...
Zirkonzahn
... owing to its own special material composition, displays an incredible high bending strength and a perfectly natural appearance. Especially in the field of implant dentistry, in cases of limited available ...
Zirkonzahn
... individual and very stable dental restorations. PROPERTIES AT A GLANCE: Biocompatible zirconia with excellent flexural strength and a particularly high translucency No limitations! Especially suitable ...
Zirkonzahn
The Prettau® Bridge has been used for patients all over the world for 10 years now. Tens of thousands of structures have been skilfully coloured by hand and refined individually for each patient. All these experiences have been integrated ...
Zirkonzahn
... for all kinds of zirconia restorations, although it is particularly suitable for monolithic restorations. For a material-identical determination of the patient's tooth colour, special ...
Zirkonzahn
... water cooling nor diamond drills are required. The material is milled dry and with common zirconia burs. This results in shorter milling times, lower material consumption and tool wear. The material ...
Zirkonzahn
... pre-coloured zirconia material, where the shades correspond to the Vita shade system. No manual characterization is required before sintering. The material can be densely sintered immediately after milling. ...
Zirkonzahn
Your suggestions for improvement:
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining