Dental office curing light Top Light Turbo

dentalfor resinbuilt-in

Overview
The Top Light Turbo dental LED curing light delivers rapid, reliable polymerization with a 5W LED, five time presets and three operating modes for chairside use and integrated units.

Key features

• Instant curing in approximately 10 seconds at 5W output (effective curing depth: ≈4 mm)
• Three curing modes (FAST, RAMP, PULSE) and five preset times (5, 10, 20, 30, 40 s) for straightforward workflow adaptation
• LED lifetime >20,000 hours and autoclavable light guide for improved hygiene and uptime
• Available configurations: built-in type or table type

Modes

• F: FAST – continuous full power
• R: RAMP – power ramps up during the first 2 seconds, then holds full power
• P: PULSE – 0.2 s off intervals with 0.8 s full-power pulses (follow composite manufacturer recommendations; pulse mode may require longer total time)

Customization
The unit offers five preset curing times (5, 10, 20, 30, 40 s) and three mode presets (FAST, RAMP, PULSE) to match material instructions and clinical preferences.

Durability and reliability
LED life exceeds 20,000 hours; the light guide is autoclavable to maintain hygiene and performance.

Specifications

• Model family: Top Light Turbo
• Light source: LED
• Rated output power: 5W
• Effective curing depth: ≈4 mm (instant cure ≈10 s under stated conditions)
• Curing modes: FAST, RAMP, PULSE
• PULSE timing: 0.2 s off / 0.8 s full-power pulses
• RAMP: power increases during first 2 s then maintains full power
• Curing time presets: 5 s, 10 s, 20 s, 30 s, 40 s
• LED lifetime: >20,000 hours
• Light guide: autoclavable
• Configurations: built-in type or table type