Dental office curing light D-2000

dentalfor resinbuilt-in

Overview
The D-2000 LED dental curing light integrates a high-power 5W LED with a charging station that includes a built-in digital intensity meter, providing fast and consistent polymerization for composite materials in clinical settings.

Key features

• Instant curing within 10 seconds using a 5W output (effective curing depth: approx. 4.2 mm)
• Maximum light intensity up to 1600 mW/cm2 for efficient cross-linking of composites
• Three curing modes (FAST, RAMP, PULSE) and six preset times (5, 10, 20, 30, 40, 50 s) for workflow flexibility
• Built-in digital intensity meter located in the charging station for immediate output verification
• LED lifespan exceeding 20,000 hours for extended operational use
• Autoclavable light guide for infection control
• Economic variant available without the built-in intensity meter

Mode presets

• F: FAST – continuous full power for standard polymerization
• R: RAMP – power increases over the first 2 seconds, then maintains full power
• P: PULSE – cycles with 0.8 s full power and 0.2 s interval (may require longer total exposure; follow composite manufacturer's instructions)

Notes

• The 5W LED design extends service life while maintaining quiet operation
• Multiple power and feature versions are offered to suit different clinical needs, including an economic model without the meter

Technical specifications

• Model: D-2000
• LED power: 5W
• Maximum intensity: up to 1600 mW/cm2
• Effective curing depth/area: approx. 4.2 mm depth
• Curing modes: FAST, RAMP, PULSE
• Curing time presets: 5, 10, 20, 30, 40, 50 seconds
• PULSE timing: 0.8 s full power / 0.2 s interval (per cycle)
• Built-in digital intensity meter: located in charging station (instant output testing)
• LED life: over 20,000 hours
• Light guide: autoclavable
• Variants: version with meter and economic version without meter