Opus Bulk Fill Flow APS
Flowable light-curing composite with low shrinkage stress.
Easy insertion and adaptation;
Base of posterior restorations in increments of up to 4 mm.
Self-leveling: It allows a perfect adaptation of the material to the walls of the preparation
Smart thixotropy: Antigravity action: perfect application to superior teeth
Mechanical resistance: With approximately 68% of mass fillers, the composite shows enough mechanical strength to be used under direct restorations. It should be coated with a dense-consistency composite.
Stability under ambient light: Provides longer working time
Curing Depth: Can be inserted in increments up to 4 mm deep.
Compatibility: With all classes of adhesives and methacrylate based composites
• Basis of posterior restoration (class I and II).
• Liner under direct restorative materials.
• Regularization/planification of the cavity preparation walls.
• Repair of small enamel defects.
• Repair of temporary materials in acrylic and resin.
Prepare the cavity and keep the tooth free from contaminants, preferably with absolute isolation.
The application of phosphoric acid and dental adhesive must follow the protocol of the respective products used.
Apply Opus Bulk Fill Flow APS into the cavity, in 4mm increments. Start applying the composite to the deeper zones of the preparation, dispensing the material so that the applicator pointer is close or briefly above the layer that is being applied.We do not recommend submersing the applicator pointer into the composite during insertion.