Surgical video camera OPCL-100

digital4K3840 x 2160

Overview
Operable as a single unit or in combination with a multi-controller. The 1/1.8-inch 4K CMOS sensor achieves high image quality with a horizontal resolution of 1800 TV lines. Equipped with an optical 25× zoom lens (autofocus) and pan/tilt speed compensation. Built-in pickup microphone enables synchronized audio capture. Single-cable camera connection supported; RS-232C compatibility allows integration into operating-room video systems. Includes lens filter drop-prevention mechanism and image stabilization to enhance safety and stability during procedures.

Key features

• 4K high image quality with horizontal resolution of 1800 TV lines (1/1.8-inch 4K CMOS sensor)
• High-magnification optical 25× zoom lens with autofocus
• Pan/tilt speed compensation matched to zoom for smooth, accurate operation
• Image stabilization to reduce vibration from HVAC and other sources
• Lens filter drop-prevention mechanism for safety during procedures
• Infrared remote control (zoom lens operation only)
• Built-in pickup microphone (mono) for synchronized audio with video
• Single-cable connection for camera (note: HDMI output transmission recommended up to 5 m)
• RS-232C support for system integration into operating-room video systems

Standard configuration & accessories

• AC cable / AC adapter
• Close-up lens (φ77 mm)
• Filter drop-prevention cover
• Infrared remote control
• User manual (installation guide)

Options

• Camera cable
• ND filter (φ77 mm)
• Up to two add-on items (close-up lenses and filters combined)

Notes

• HDMI output recommended maximum cable length: 5 m (see product notes)
• When outputting HDMI in DVI mode, resolution is 1920 × 1080p RGB 4:4:4 (selectable via DIP switch)
• When using OPMO-100, output from OPCL-100 may be disabled—check product combinations

Technical specifications

• Image sensor: 1/1.8-inch CMOS
• Effective pixels: 3840 (H) × 2160 (V)
• Horizontal resolution: 1800 TV lines
• Focal length: f = 6.5 mm – 162.5 mm
• Zoom ratio: 25× optical
• Angle of view: (H) 59.0° (Wide) – 2.8° (Tele)
• Minimum shooting distance: 100 mm (Wide) / 1200 mm (Tele)
• Shooting range at 25×: 710 mm (Near) – 2000 mm (Far)*1 (with close-up lens attached)
• HDMI output: one port 3840 × 2160p, 59.94 Hz or 1920 × 1080i/p, 59.94 Hz*4 (see notes)
• Microphone: built-in in OPCL-100 (mono)
• Audio output: embedded audio (HDMI)
• External control: infrared remote, RS-232C (3.5 mm mini jack)
• Mounting: 1/4-20 UNC, 3 holes (two must be fixed); pitch 50 mm, depth 7 mm
• Body fall-prevention (wire attachment): 2 screw holes (M4 depth 6 mm)
• Power / consumption: DC 12 V / ≤ 15 W
• Operating temperature / humidity: 0 °C – +40 °C / 30–90% (non-condensing)
• Dimensions (excluding protrusions): W 106 mm × H 123 mm × D 274 mm
• Weight: ≤ 1.5 kg

(Notes) *1: With close-up lens attached. *2: Maximum 5 m. *3: HDMI output in DVI mode is 1920 × 1080p RGB 4:4:4 (select via DIP switch). *4: When using OPMO-100, output from OPCL-100 may be disabled.