worktop with sink / laboratory / technical ceramics / modular
laboratory, technical ceramics, modular
EU worktop for fume hood with shaped front edge to ensure laminar flow.
Customized shaping of frontal corners to allow the mounting in the fume hood cabinet.
A rim against overflows along all four sides: “Marine edge” profile, 25-33 mm thick.
Two holes on the rear part of the work surface for rectangular sinks: 300x150 mm.
Hole with glazed edges for the “under the top” sink mounting solution.
Worktops are produced with a frontal glazed edge while remaining edges can be cut to size.
Cuts can be made also with Water Jet technology.
Worktops can be produced on demand with short and rear finished and/or glazed edges.
Special shaped worktops can be also produced with custom made moulds.
It is possible to make holes for fittings/taps and any kind of opening with glazed or unglazed cut edges.
Worktops and sinks can be produced in a wide range of colours.
Technical ceramic worktops have geometric tolerances in accordance with DIN 12916.