laboratory worktop / sterilization / technical ceramics
Eco-Logic ®



  • Other characteristics:

    laboratory, sterilization, technical ceramics


Eco_Logic® worktops assembled to obtain a complex layout of a central “island” bench.
All worktops have a rim against overflows only in the front and external short edges.
The “Marine edge” profile, 20-28 mm thick, generates a continuous and flat central working area.
Two holes on the work surface for small square sinks: 150x150 mm.
Holes with glazed edges for the “under the top” sink mounting solution.
Special Water Jet cuts holes for fittings of central “island” bench.

Worktops are produced with a frontal glazed edge while remaining edges can be cut to size.
Cuts can be done also with Water Jet technology.
Worktops can be produced on demand with short and rear finished and/or glazed edges.
Special shaped worktops can be also produced with custom made moulds.

It is possible to make holes for fittings /taps and any kind of opening with glazed or unglazed cut edges.

Worktops and sinks can be produced in a wide range of colours.

Technical ceramic worktops have geometric tolerances in accordance with DIN 12916.