X-ray QA dosimeter dido/time M

X-ray QA dosimeter - dido/time M - QUART X-Ray QA Solutions
X-ray QA dosimeter - dido/time M - QUART X-Ray QA Solutions
Add to favorites
Compare this product

Characteristics

Ionizing radiation
X-ray

Description

Short description
The QUART dido/time M is a portable dose meter for routine dose, dose-width-product (DWP), dose rate and exposure time measurements in mammography QA/QC (25–35 kV). It enables single-exposure acquisition of all required parameters and is calibrated to Mo/Mo radiation quality for consistent routine tests.

Application
  • Routine test dosemeter for mammography QA/QC (25–35 kV)
  • Ready for use immediately after activation; no presetting required—position the detector and expose to acquire routine check parameters
  • Calibrated to Mo/Mo radiation quality
  • Intended for use with an image quality control phantom in x‑ray quality control workflows

General Features
  • Exposures: single exposure acquires all parameters
  • Operation mode: auto-start, auto-stop and auto-reset
  • Power supply: rechargeable Li‑ion accumulator
  • Battery time: approx. 120 hours between charges
  • Base dimensions: 17 × 7 × 4.5 cm (L × W × H)
  • Base weight: 200 g
  • Detector dimensions: 6.0 × 1.8 × 0.5 cm (L × W × H)
  • Detector weight: negligible

Specifications
  • Dose: 0.5 µGy – 99 Gy (resolution: 0.01 nGy)
  • DWP: 0.5 µGy·cm – 999 Gy·cm (resolution: 0.01 nGy·cm)
  • Dose rate: 0.5 µGy/s – 1 Gy/s (resolution: 0.1 nGy/s)
  • Time: 0.5 ms – 300 s (uncertainty: ±1.0%; resolution: 0.1 ms)

Technical specifications
  • Model: dido/time M
  • Intended use: Routine mammography QA/QC (25–35 kV)
  • Calibration quality: Mo/Mo radiation quality
  • Measured parameters: Dose, Dose-Width-Product (DWP), Dose Rate, Time
  • Dose range: 0.5 µGy – 99 Gy (resolution 0.01 nGy)
  • DWP range: 0.5 µGy·cm – 999 Gy·cm (resolution 0.01 nGy·cm)
  • Dose rate range: 0.5 µGy/s – 1 Gy/s (resolution 0.1 nGy/s)
  • Time range: 0.5 ms – 300 s (uncertainty ±1.0%, resolution 0.1 ms)
  • Operation mode: auto-start, auto-stop, auto-reset
  • Power supply: rechargeable Li‑ion accumulator; battery time approx. 120 hours
  • Base dimensions: 17 × 7 × 4.5 cm (L × W × H); base weight: 200 g
  • Detector dimensions: 6.0 × 1.8 × 0.5 cm (L × W × H); detector weight: negligible

Catalogs

No catalogs are available for this product.

See all of QUART X-Ray QA Solutions‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.