Control testing system AG-Xplus

CO2laboratoryfloor-standing

Features autotuning of the control parameters in real time based on stress and strain data measured during testing as well as reliable comparison of unknown sample data, without pre-testing. Features Short Test Cycle Time Selecting a 5 kN max. HS table-top type with a 3300 mm/min return speed and 3000 mm/min crosshead speed reduces the test cycle time for specimens that stretch, such as rubber. Short-column Type (Model SC) Added Ideal for the compression testing of small parts, such as electrical and electronic components. It offers a 700 mm testing space, and the 1130 mm test height permits installation in a room with a low ceiling. Power-saving Standby Mode Reduces Environmental Stress The AG-Xplus reduces the power consumption in standby mode, cutting CO2 emissions and reducing the environmental stress. Power savings of approximately 10 to 25 % are possible, depending on the frame capacity. Easy Stress and Strain Control Features autotuning of the control parameters in real time based on stress and strain data measured during testing as well as reliable comparison of unknown sample data, without pre-testing. In addition, the autotuning function easily provides the strain control required by ISO 6892-2009. Steel Industry: The steel industry is receiving more demands from the automobile industry to test under strain control in addition to stress control Plastic Industry: In the plastics industry, strain control is essential for calculating the modulus of elasticity according to new JIS, using the leading edge of the stress-strain curve Ceramics Industry: In the ceramics industry, accurate control is demanded initially,