Torque ratchet for inserting and removing dental screws with a defined torque. The torque function
can also be “blocked”; the blocked position enables greater torque to be transferred when placing implants,
and allows connections to be loosened.
The torque ratchet may only be used by trained dental specialists.
Prosthodontic setting − torque function: The desired torque can be continuously set via the spring
using the adjusting nut. The scale on the scale sleeve shows the setting.
Surgery setting − blocked function: Turn adjusting nut to scale mark ∞ (infinite). Do not tighten excessively.
Store without tension at 10 Ncm.
Caution! The ratchet must not be subjected to stress above 100 Ncm. Do not loosen the two adjusting nut
screws (X), as this leads to a loss of calibration