- Dental >
- Dental practice >
- Dental material >
- KaVo Kerr
KaVo Kerr dental materials
The Multi-purpose PERFECTWAX DENTURE WAX is suitable to create preliminary denture base. It is made of the best raw materials to guarantee consistent quality where low melting point, ...
BILKIM CO. LTD.
The finest materials are used to make the POLYWAX DENTURE WAX. The wax. It is perfect for general use for technicians who are looking for easy shaping, carving, modelling properties.
BILKIM CO. LTD.
The DIPPING WAX provides very precise result with the perfect amount of elasticity. It has a melting point of 63°C Available in Molar Form and Disk Form, Yellow.
BILKIM CO. LTD.
Conveniently print surgical guides in the clinic. Full arch, partial arch, initial guide & quick guide production. Class II Medical Device Water-washable Low viscosity Fracture and bending resistance
Ray
Recommended for use in Class III and IV restoration and for limited use in Class I in premolar: and selected Class IV restorations where esthetics is of primary importance. CONTENTS: CITRIX 10G: 5g Catalyst Paste, 5g Base Paste, ...
Apixia
Light cure composite recommended for use in Class I in premolar restorations and selected Class IV where esthetics is of primary importance. CONTENTS: Light Cure Composite Syringes, A2, A3, A3.5, ...
Apixia
Seals the dentin and forms a protective film against thermal and electric influences. Protects pulp and forms a complété cavity insulation under ail fillings. (Composite, silicates, cements) CONTENTS: Composeal Varnish 0.5 oz
Apixia
Material for orthodontics clear aligner treatment developed by Clickalign - IPN Film(Interpenetrating Polymer Network) IPN, the first NMPA certified medical-class resin film in China, consists of 3 layers, each of ...
SCULPTURING WAX FOR CASTABLE CERAMIC SYSTEMS The castable ceramic technique poses special requirements to sculpturing waxes. al dente VKS waxes are free of opaque ingredients, so that undesired reactions with investments are avoided. ...
al dente Dentalprodukte GmbH
For blocking out undercuts in model casting technique. al dente block-out wax adheres firmly to the plaster and can be carved easily. Contains inorganic substances and is therefore not suitable as casting wax.
al dente Dentalprodukte GmbH
Flexural strength: 85 MPa
Light-curing tray material with excellent physical properties. Easy to adapt on the model due to the composite’s inert material composition. Very stable in dimension and break resistant. Preformed upper ...
al dente Dentalprodukte GmbH
GBR SMARTbuilderTM is the material to stimulate periodontal tissue regeneration and is non-absorbable membrane made of customized titanium material in order to stimulate bone augmentation after bone ...
> Complements the disadvantage of susceptibility to infection due to the use of soft tissue > Easily shaped using surgical scissors
Kromopan Since Kromopan was created it has been an incredible break through in dentistry, allowing, thanks to the chromatic phase indicator (purple: mixing -> pink: tray loading -> white: insertion in mouth), the impression taking with ...
LASCOD S.p.A.
Flexural strength: 83, 69, 63 MPa
... Pink – opaque, not veined Advantages High impact strength Good flow and modeling properties Good bond to denture teeth Good polishing properties Esthetic appearance Low adhesion ...
Candulor
... * which promotes pulp vitality.2 It is a dual-cured material that will polymerize even in deep restorations where light cannot reach. TheraBase is stronger and more durable than other base materials, ...
BISCO
Premixed Bioceramic Endodontic Materials TotalFill® is a pre-mixed bioceramic obturation material. It is dispensed using a syringe in cases of root canal obturation and with either a syringe or as ...
Easy-to-use premixed calcium aluminosilicate paste Indication: Permanent obturation of the root canal High purity calcium aluminosilicates Resin-free Eugenol-free Hydroxyapatite generation Excellent root canal sealing capacity Excellent ...
Premixed root canal filling material Calcium aluminosilicate paste (putty type) Indications: Pulp capping, Repair of root perforation, Repair of root resorption, Root-end filling, Apexification Antibacterial effects ...
Composite material with PEEK matrix for parts with high structural characteristics Carbon PEEK is a composite material reinforced with carbon fiber, with extraordinary characteristics in terms of mechanical, ...
... for tribological applications where wear resistance and self-lubricating properties are required. Roboze customers use this material for functional prototyping, small series production and one-off products subjected to ...
... metal for high level performance The strongest carbon fiber reinforced PA in the industry Carbon PA PRO is a composite material in which chopped carbon fibers are incorporated into a polyamide matrix, creating one ...
Vista Apex’s patented Chlor-XTRA™ is an enhanced 6% sodium hypochlorite solution designed for irrigation, debridement and cleansing of root canals during and after instrumentation. The addition of powerful wetting agents and proprietary ...
Vista Dental Products
VeriCast OS prints accurate and detailed crowns, bridges, substructures, and RPD frameworks, is durable, and burns out cleanly. It’s ideal for investment casting and ceramic pressing, and its red color makes it easy to see detail. VeriCast ...
Whip Mix Corporation
... liquid or 2 parts of powder for 1 part of liquid. Alkaline ph: Minimizes side effects. Indications For whitening of non-vital teeth via application and maintenance inside the pulp chamber (walking bleach technique). Before ...
FGM Dental Products
Insulation for 3D models when processing cold-curing resin, such as STEADY-RESIN S. Application with enclosed brush provides optimum insulation, suitable for models generated with 3D printers.
Scheu-Dental GmbH
Dental Cast Resin Dental Cast Resin, is suitable for making the dental cast, partial dentures, etc. Features High precision Combustion without residue Smooth finish Small expansion Good ...
LCD/DLP Common Photosensitive Resin LCD/DLP common photosensitive resin with several colors specialize in SLA 3d printer, high accuracy, stable printing models and fast printing speed. LCD/DLP common photosensitive resin with several ...
CAVEX BITE&WHITE IN-OFFICE Maximum whitening result with minimal sensitivity? That is the Cavex Bite&White In-Office System. The whitening gel is based on revolutionary Hydrogen Peroxide Superior (HPS) technology, which achieves unprecedented ...
Cavex Holland BV
... press is a lithium disilicate glass ceramic of the latest generation for the press technique. The high strength values of the material can be experienced when grinding Livento® press. The fit is perfect even after being ...
Cendres+Métaux SA
... mouth. Owing to the low weight of the denture and its ability to absorb loads, patients benefit from completely new wearing comfort. The PEKK material used for Pekkton® ivory originates from the PAEK ...
Cendres+Métaux SA
... oxide. The portfolio includes a balanced manageable range of different ceramic materials such as Margin, Frame Modifier, Opal, Dentine, Opaque Dentine, Enamel and Effect Materials. The ceramic shades ...
Cendres+Métaux SA
CHAIRSIDE® Attachment Processing Material CHAIRSIDE® Attachment Processing Material was designed for ease of use and predictability while processing attachments into full or partial overdentures either ...
Zest Dental Solutions
theraplast is a self-adhesive plastic, as one would like it as a dental technician. It impresses with a wide range of indications for the entire dental field. Indications theraplast is characterized ...
... The product is ideal for all types of impressionsused to create dentures, removable Dental prostheses and appliances, braces, temporary Dental structures, etc. For dental use only ISO ...
VANNINI DENTAL INDUSTRY s.r.l.
... with low-fusing ceramic materials. Edge sharpness and brilliant colors can be achieved easily. Even large-span restorations can be layered in one step. Eliminating the need for in between drying to achieve stability in ...
HPdent GmbH
... with low-fusing ceramic materials. Edge sharpness and brilliant colors can be achieved easily. Even large-span restorations can be layered in one step. Eliminating the need for in between drying to achieve stability in ...
HPdent GmbH
... about time for an investment material to bring out the best in these great materials. TriVest has no reaction layer after pressing, the fits are just fantastic and of course we have considered the use ...
HPdent GmbH
S-U-ALUSTRAL Aluminium-Oxide Abrasive Powders S-U-ALUSTRAL 50 μ (extreme fine) Removal of investment material, ceramic alloy metal preparation, removal of surplus ceramic mass in metal-ceramic crowns. S-U-ALUSTRAL 110 ...
SCHULER-DENTAL GmbH & Co. KG
S-U-CERA-BLAST Glass-Beads Abrasive Powders S-U-CERA-BLAST 50 μ (beads extreme fine) Polishing of crowns and bridges, production of mastication surface on occlusal surfaces. Blasting of secondary crowns, removal of oxidation films after ...
SCHULER-DENTAL GmbH & Co. KG
S-U-MODELLING-WAX, blue hard-elastic Universal Casting Wax Item No. 6000001 Especially suitable for the waxing of occlusal surfaces and the shaping of crown walls as well as the building up of bridge pontics for acrylic and porcelain ...
SCHULER-DENTAL GmbH & Co. KG
... required in alginate substitute materials. Unique adaptable properties – capable of capturing the finer details Exceptionally accurate, hydrophilic and strong. Versatile material that can be used as ...
Parkell Inc.
Your suggestions for improvement:
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining