Temperature range: 20 °C - 1,560 °C
Capacity: 1.24 l
... Overview
Sintering of single crowns on anterior teeth in as little as 90 minutes; polished restorations deliverable in approximately 2 hours. Designed for dental laboratories and clinic-based production workflows requiring fast and repeatable ...
... Product description
Set of 6 Dot Posts supplied by Tupel 3D. These dot posts serve as physical scanning markers for implant scanners and are supplied as an additional/replacement set for clinical and laboratory use.
Compatibility
For ...
... Product overview
Set of 6 scan bodies intended for digital capture of dental implant positions. Designed for use in clinical and laboratory intraoral scanning workflows to facilitate accurate implant restoration planning.
Contents
- Includes:
... Description
INTERWAXIT is a degreasing solution designed for wax models. It removes greasy residues and reduces surface tension on wax structures to improve wetting and subsequent processing in dental and laboratory workflows.
Available ...
... OZONETTE DENT is a compact medical ozone generator that incorporates the latest technological advances. Designed for ozone therapy oral applications where concentrations must be measured accurately and safely, complying with international standards.
EXCLUSIVE ...
Capacity: 75 l - 200 l
Carrying capacity: 160, 200, 240, 170 kg
Temperature range: 121 °C - 134 °C
The Azteca AC steam sterilizer family consists of pre- and post-vacuum sterilizers, autoclaves, designed with the highest quality for sterilization of wrapped or unwrapped goods such as fabrics, surgical instruments, utensils, and other heat and moisture ...
Capacity: 25 l
Carrying capacity: 70 kg
Temperature range: 121 °C - 134 °C
The Sting 11B benchtop autoclave machine is a fully automatic, high-speed pre and post vacuum steam sterilizer that has been designed with the highest attention to quality. As a class B sterilizer, it can treat wrapped materials, hollow instruments and ...
Weight: 9.5 kg
... Dental scanner Aton4plus: Accuracy: < 8 microns Ultra fast scanning Only 12 seconds to scan the entire arch Non-sectioned models Detects fine preparation in depth on non-sectioned prosthetic models and areas of interest on orthodontic models Real ...
88Dent
... Light Box 2 3DBusiness: the new concentrated beam post-treatment UV booth Light Box 2 is a fast and easy to use post-curing cabinet for 3D printing. Thanks to the double Power Slab technology, the booth uses a double UV light source to improve the resistance ...
88Dent
Temperature range: 250 °C - 1,200 °C
... Vario Press 300e was born as a press furnace, but it is also an excellent firing furnace for stratified and pressed ceramics. What makes it unique is the patented interface for working with lithium disilicate ceramics, a material that stands out for ...
88Dent
The question of whether the implant is suitable for immediate restoration often presents a challenge for the treating dentist. By default, the torque in Ncm is used when inserting the implant. The bredent PenguinRFA is the ideal solution as a supplement ...
Width: 27 cm
Depth: 45 cm
Weight: 18 kg
... Fully automated optical structured-light Scanner S300 ARTI with scanning software PC and screen Basic modeling software Zirkonzahn.Modellier Characteristics Especially compact fully automated optical structured-light scanner with two high-resolution ...
Zirkonzahn
Width: 48 cm
Depth: 41 cm
Weight: 56 kg
... Fully automated optical structured-light Scanner S600 ARTI with scanning software PC and screen Basic modeling software Zirkonzahn.Modellier Characteristics Fully automated optical structured-light scanner with two high-resolution high-speed cameras, ...
Zirkonzahn
Width: 48 cm
Depth: 41 cm
Weight: 56 kg
... Fully automated optical structured-light Scanner S900 ARTI with scanning software PC and screen Basic modeling software Zirkonzahn.Modellier Characteristics Fully automated optical structured-light scanner with three high-resolution high-speed cameras ...
Zirkonzahn
... Improve dental occlusion analysis with advanced EMG technology Myowise: elevate your occlusal analysis with an advanced EMG system Embark on a journey of innovation with Myowise, the leading solution for dental occlusion analysis. Designed with ...
Capacity: 17 l
Temperature range: 121 °C - 134 °C
Width: 35 cm
With a totally innovative design, the Autoclave Elite is modern, easy to use and compact. Manufactured with the best components on the market, stainless steel tank and cabinet with engineering polymers (light), which reduces the incidence of oxidation. ...
BIO-ART EQUIPAMENTOS ODONTOLÓGICOS
Capacity: 12 l
Temperature range: 121 °C - 134 °C
Width: 35 cm
With a totally innovative design, the Autoclave Elite is modern, easy to use and compact. Manufactured with the best components on the market, stainless steel tank and cabinet with engineering polymers (light), which reduces the incidence of oxidation. ...
BIO-ART EQUIPAMENTOS ODONTOLÓGICOS
Capacity: 21 l
Temperature range: 121 °C - 134 °C
Width: 35 cm
With a totally innovative design, the Autoclave Elite is modern, easy to use and compact. Manufactured with the best components on the market, stainless steel tank and cabinet with engineering polymers (light), which reduces the incidence of oxidation. ...
BIO-ART EQUIPAMENTOS ODONTOLÓGICOS
... Product code: SFYV009 Category: Prosthetic Parts Description: M1.4 connecting screw designed for use with MUA prosthetic parts. This component is compatible with several implant systems and is manufactured from high-quality titanium for durability and ...
IML Swiss Dental Implants
... IML ensures the highest mechanical precision in the implant-abutment coupling and cancels micro-movements and allows a balanced masticatory loads on the whole implant systems reducing the bone stress keeping it long-term healthy. USABLE WITH - Universe ...
IML Swiss Dental Implants
... IML ensures the highest mechanical precision in the implant-abutment coupling and cancels micro-movements and allows a balanced masticatory loads on the whole implant systems reducing the bone stress keeping it long-term healthy. USABLE WITH - Universe CATEGORY ...
IML Swiss Dental Implants
... Packaging 1 unit, individual packaging Composition PVC Mint flavor ...
ORTHOPLUS
... Suitable for open bite and overjet (greater than 10 mm) Available in 4 colors (red, blue, green and clear) Technical Specifications Designed with a 6 mm overjet for progressive repositioning of the mandible Thick bumpers for normalization of lower lip ...
ORTHOPLUS
... Suitable for overbite Available in 4 colors (red, blue, green and clear) Technical Specifications Lingual resting area for tongue dome support on the palate Limited vestibular band height for patient comfort Short bumpers for less pronounced ...
ORTHOPLUS
... The world's most advanced anesthesia device. This electronic injection pen is the only system in the world that allows for all injection techniques and intraosseous anesthesia. Why choose intraosseous anesthesia with QuickSleeper6? - The QuickSleeper6 ...
... Speed, efficiency and comfort guaranteed ! The QuickSleeper5 electronic pen performs efficient and comfortable local dental anesthesia, but also, and in particular, intraosseous anesthesia. QuickSleeper is the only system in the world that enables ...
... Light, easy to use and ultimately precise SleeperOne is an injection pen to perform all your local dental anesthesias more effectively and comfortably. With SleeperOne optimize and simplify all of your injections. Why choose the electronic injection ...
Capacity: 23 l
Temperature range: 121 °C - 134 °C
Width: 45 cm
... Drying Procedure - Vacuum Drying Tests - Bowie-Dick & Vacuum Test Power Rating - 2000 W Door Lock - Double-Controlled Power Supply - AC 190-240V / 50-60 Hz ...
... > For both, model scanner and intra oral scanner. > For the Multi Hybrid Ti-Base. > Made of 100% titanium alloy with a special coating applied. > No need to spray ...
Cowellmedi
... > For both, model scanner and intra oral scanner. > For the Lock Hybrid Ti-Base. > Made of 100% titanium alloy with a special coating applied. > No need to spray. ...
Cowellmedi
... > Packing Unit : 1 Scanbody + 1 Abutment Screw > For both, Model Scanner and Intra Oral Scanner > For Sub-N. Hybrid S and L Ti-Base > 100% Titanium for More Strength and Precision > No Need to Spray due to Special AR Coating. ...
Cowellmedi
A cross infection transmitted during dental treatment is a known risk. The most exposed subjects are: operators, patients and employees. The oral cavity is a source of contamination due to the high microbial load present, given the presence of saliva ...
... The elimination of bacteria, fungi and viruses by ozone in drinking and waste water has been successfully applied for over 100 years; oysters and mussels are decontaminated, fishes protected against microbes. The medical use of ozonized water also ...
Capacity: 35 l
Temperature range: 116 °C - 134 °C
Width: 49.8 cm
... Product Overview
Labotemp Vertical Autoclave VEA-04 is a compact 35 liter Automatic Vertical Steam Sterilizer designed for laboratories, research institutes, and small clinical facilities requiring advanced sterilization control. It features ...
Labotemp Systems
Capacity: 75 l
Temperature range: 116 °C - 134 °C
Width: 72.5 cm
... Overview
Labotemp Automatic Vertical Steam Sterilizer VEA-05 is a 75 L vertical autoclave designed for medical, hospital, dental and laboratory environments that require deep steam penetration. It uses three-stage pre-vacuum air removal to ensure ...
Labotemp Systems
Capacity: 23 l
Temperature range: 121 °C - 134 °C
Width: 48 cm
... Product Overview
Labotemp Benchtop Autoclave BTA-04 is a Class N tabletop autoclave designed for routine sterilization of medical instruments, surgical tools and laboratory equipment. The unit delivers saturated steam at 121°C and 134°C from ...
Labotemp Systems
... drill guide Characteristics Application domain: for dental implantology Material: stainless steel, titanium Products Description Used for a flapless surgery. It can also serve as a guide for positioning the drill while measuring the thickness of ...
... Characteristics Application domain: for dental implantology Material: surgical stainless steel, titanium Products Description Complete solution for critical problems which might occur in the prosthetics process. Flexibility in challenging clinical ...
... Overview
- Product type: Oral Education Assessment System (also referenced as Dental Clinical Training Simulator / Kids Dental Simulation)
- Place of origin: Guangdong, China
- Field: Education / Medical Science (dental)
- Intended
... Product title
Scanbody. Hybrid titanium/PEEK. ReplicaDent screwdriver only (4.5 mm).
Overview
Hybrid scanbody combining titanium and PEEK, designed for digital impression scanning in single restoration workflows. Supplied with ...
ReplicaDent
... Product name Scanbody Hybrid titanium/PEEK, WP.
Reference / SKU REF: 00788
Overview Hybrid scanbody combining a titanium connection element with a PEEK scanning portion. Designed to support digital implant workflows ...
ReplicaDent
... Overview
Hybrid titanium/PEEK scanbody designed for digital impression workflows in restorative dentistry. REF: 02698. Compatible with Straumann Neodent implant platforms; transfer height 13.0 mm. Suitable for single-restoration workflows and ...
ReplicaDent
... i-liner is the aligner system for completely aesthetic orthodontics. i-liner is perfectly transparent and comfortable, while the workflow is organized on an intuitive and simple web platform. Technology The Research and Development activities of SIA ...
... 1. It can work under AC power source only. 2. Low voltage electric shock can melt the needle instantly; mechanic cutting can melt syringe body, double overheating protection is provided. 3. There will be little electrical spark which is normal during ...
... 1. It can work under AC power source only. 2. Low voltage electric shock can melt the needle instantly; mechanic cutting can melt syringe body, double overheating protection is provided. 3. There will be little electrical spark which is normal during ...
... UV lamp for the polymerization of resins and photosensitive materials such as dental impression trays and ear prostheses. The appliance is built in stainless steel and is composed of: – fixed base that supports the articles to be polymerized. – 2 compact ...
Used in conjunction with the suction device of the treatment machine, it is used to keep the oral cavity open, isolate teeth, press the tongue, protect the cheeks, and extract blood, saliva, and other foreign objects from the patient's mouth during oral ...