Pharmaceutical testers

Fast measurement of O2 concentration with EC-cell The MAT1100 is the right choice whenever you only need to be concerned with the oxygen concentration or whenever only nitrogen is used. Its electrochemical oxygen cell (EC) measures within ...

The economic solution If you need to measure the concentrations of oxygen and carbon dioxide, then the MAT1200 will be the appropriate model. In addition to an electrochemical oxygen cell, it features a non-dispersive infrared sensor ...

The zirconium dioxide sensor (ZrO2) of the MAT1400 measures the oxygen concentration over the entire measurement range between 0 and 100 volume per cent. Especially in case of a very low concentration, it will achieve an excellent accuracy ...

- Compact and lightweight design - Full compliance to international and local safety standards IEC/EN 62353, AAMI/IEC/EN - 60601-1, IEC 61010, NFPA-99 and AS/NZ 3551 - Battery powered earth/ground bond, insulation and leakage testing - ...

- Test to IEC / EN 62353, NFPA-99, AS / NZ 3551 & more - Built -in electronic data storage - Flexible user-definable test routines - Simple PC communication link - Battery-powered insulation and earth/ground bond tests - 50/100/250/500V ...

- Point to point insulation testing 100K – 100MΩ - Dynamic pass/fail thresholds during measurement - Compact, robust and portable design - Manual control of fault conditions and tests - Accurate high current, low energy earth bond ...

The FlowAnalyser PRO is our top-of-the-line ventilator tester for biomedical engineers, independent service providers, and anesthesia and respiratory equipment manufacturers. It offers portability and the highest precision and features ...

The FlowAnalyser PF-300 is our premium bench-top ventilator tester designed for biomedical engineers, independent service providers, and anesthesia and respiratory equipment manufacturers. It offers portability and precision to meet your ...

The ideal all-in-one test device for medical technicians, independent service providers, anesthesia and respiratory equipment manufacturers. The CITREX H5 gas flow and pressure gauge offers the most advanced user interface for demanding ...

The mechanical glove tester consists of a base with an inflatable seal along its perimeter, an output for compressed air into the sleeve and an input for the digital pressure sensor. There is also a flange with two buttons for pressurizing ...

DEHAS oxygen monitor QualityMON is used to determine and monitor oxygen concentrations in breathing gas mixtures in medical applications.

RIV-3000A Infrared & Radiation Imaging Spectrometer An integrated device that combines visible light, infrared imaging, and radiation imaging. It can simultaneously screen for individuals with high temperature and radiation risk factors, ...

RLS-1000A Radiation Locator Based on coded radiation imaging technology, it can accurately image radioactive materials. It is suitable for use at customs border ports, airports, and other entry and exit points for visual monitoring to ...

RLS-3000C Portable Radiation Locator The product is based on panoramic gamma imaging technology, which can be used for 4π all-round imaging of radioactive materials. The device is lightweight and highly sensitive, making it suitable ...

1. The hand-held oxygen analyser adopt ultrasound principle and long service life 2. The hand-held oxygen analyser is a accurate oxygen measurements to test PSA oxygen machine 3. The hand-held oxygen analyser is small and only 146gram 4. ...

MCI-1, The Portable Oxygen Analyzer is an measurement instrument developed by SHENYANG AERTI TECH CO.,LTD for PSA oxygen concentrator. It is designed to measure oxygen concentration, flow and outlet pressure of oxygen concentrators. The ...

1. 3 in 1 Oxygen Analyzer adopt ultrasound principle and long service life 2. 3 in 1 Oxygen Analyzerr is a accurate oxygen measurements 3. 3 in 1 Oxygen Analyzer is convenient to measure PSA oxygen concentrator 4. 3 in 1 Oxygen Analyzer ...

The compact film thickness monitor is a reflection spectrophotometric film thickness meter that uses a small reflection probe and is applicable in all situations from the laboratory level to in-line 100% inspection in the production process. ...

Imaging film thickness monitor is a metrology tool that can visualize the film thickness distribution of a transparent multilayer film. It can visualize the film thickness distribution with 0.1nm thickness resolution by using the spectroscopic ...

Infrared sheet thickness monitors measure the thickness of translucent sheets such as battery separators, low reflective coatings such as black resist, and silicon. It can be used in all applications from laboratory level to in-line 100% ...

Alu-Alu blister packs offer a virtual barrier for water and oxygen. However, the elongation forming process may cause pinholes, pores, and fractures, which result in the oxidation of medicine. Thus, installation of the online pinhole ...

Pressure MAX Digital Pressure Meter has three ports to measure pressure: a wide port, a narrow port, and a differential port. It features extremely accurate measurements of positive, negative (vacuum), and differential pressures for fluid, ...

The world’s smallest automated electrical safety analyzer is designed to perform all electrical safety tests with the touch of one button. Advanced features and half the cost of other automated safety analyzers. User-defined tests with ...

BMET Pack PRO, a compact pack for all Pronk products and accessories with extra space for tools and 15.6-in. PC/tablet compartment. Includes the world’s smallest simulators — SC-5 SimCube® NIBP, OX-2 OxSim Flex® SpO2, and SimSlim® Multi-parameter ...

EF606 Series Electrosurgical Insulation Detector is a special détection instrument used in the field of hospital disinfection supply center, operating room, endoscope room and other departments for active and internai insulation or on-off ...

>Color 2.8" LCD touch screen, touch operation interface, built-in buzzer, equipped with a variety of matching accessories, can realize the détection of charged surgical instruments and medical power cords; >With high-pressure test ...

This product is a "sealed bags and membrane permeability requirements and test methods for materials and plastic film may be composed of a combination of" in accordance with the requirementsYY/T 0698.5-2009 Section 5, to achieve a combination ...

SM86 sterility test system is used for sterility test in sterile product.It can work with all kinds of closed canister. Many types of sterile products can be tested with the SM86 sterility test system, including: ◆ LVP(Large Volume Parenteral) ...