Compact pumps

Flow: 0 m³/h - 50 m³/h
Power: 0.55, 7.5 kW

... the liquid. Thanks to Argal's specific self-priming construction, our pumps are able to operate with higher suction length and shorter priming times than traditional self-priming pumps.

Flow: 0 m³/h - 50 m³/h
Power: 0.55, 7.5 kW

... the liquid. Thanks to Argal's specific self-priming construction, our pumps are able to operate with higher suction length and shorter priming times than traditional self-priming pumps.

Flow: 0 m³/h - 50 m³/h
Power: 0.55, 7.5 kW

... the liquid. Thanks to Argal's specific self-priming construction, our pumps are able to operate with higher suction length and shorter priming times than traditional self-priming pumps.

Flow: 0 m³/h - 12 m³/h

... tolerates a temporary dry operation, ATEX construction and various electric moto power rates available make these pumps full-fledged small chemical pumps. Capacity: up to 12 m3/h Construction: close ...

Flow: 0 m³/h - 50 m³/h

This series of thermoplastic or fluorinated polymers pumps is available in both magnetic drive setting and mechanical seal for pumping various chemical liquids even if laden with impurities and suspended solids. Mainly ...

Flow: 0 m³/h - 50 m³/h

This series of thermoplastic or fluorinated polymers pumps is available in both magnetic drive setting and mechanical seal for pumping various chemical liquids even if laden with impurities and suspended solids. Mainly ...

Flow: 0 m³/h - 50 m³/h
Power: 0.25 kW

This series of thermoplastic or fluorinated polymers pumps is available in both magnetic drive setting and mechanical seal for pumping various chemical liquids even if laden with impurities and suspended solids. Mainly ...

Flow: 0 m³/h - 70 m³/h

... components plainly assembled eases any maintenance operation. The pump is equipped with: pump front and rear with a single static O-ring guide bushes housed at the two ends of the pump ...

Dosatron D25 0.2-2 % dispensing pump – Dispensing technique: Proportional, no electricity – Source of energy: Water pressure – Dispensing values: e.g. 2%=2:100=2V concentrated product – Dispensing control: Exterior, ...

The Pulsatile Blood Pump truly simulates the pumping action of the heart. Designed to minimize hemolysis. Ideal for moving emulsions, suspensions, and non-Newtonian fluids such as blood. It features silicone rubber-covered ...

Flow: 20 l/h - 250 l/h
Pressure: 0 Pa - 20 Pa

OVERVIEW The MG series magnet drive gear pumps are compact precision performance pumps for high technology applications. The magnet drive principle provides a totally sealed pump ...

Flow: 20 l/h - 250 l/h
Pressure: 0 bar - 20 bar

OVERVIEW The MG series magnet drive gear pumps are compact precision performance pumps for high technology applications. The MG300 series is designed to provide an accurate and uniform ...

Flow: 40 l/h - 190 l/h
Pressure: 0 bar - 20 bar

OVERVIEW The Fluid-o-Tech FG100 series, born from the solid experience in mag drive gear pumps, is a smart and compact pump-motor unit. The pump housing is in stainless ...

Flow: 30 l/h - 210 l/h
Pressure: 0 bar - 20 bar

OVERVIEW The Fluid-o-Tech FG200-300-400 series, born from the solid experience in mag drive gear pumps, is a smart and compact pump-motor unit. The pump housing is in ...

Flow: 40 l/h - 160 l/h
Pressure: 0 bar - 6 bar

... barbed end. The pump drives are available in 12V or 24V brush DC options and in a range of different nominal speeds and powers for intermittent duty use. The compact design makes it the preferred choice ...

Flow: 20 l/h - 140 l/h
Pressure: 0 bar - 10 bar

... DGD PRO direct drive gear pump has an AISI 316L stainless steel housing and Peek gears. The ports are 1/8” GAS in line. Designed to extend the performance of the DGD series pumps in both flow rate and ...