Length: 90, 230 mm
Number of holes: 3, 12 unit
TRUE LOCK Proximal Humerus Anatomic Plates are indicated for fractures and fracture dislocations, osteotomies, and nonunions of the proximal humerus, particularly for patients with osteopenic bone. Proximal humerus ...
Truemed Medical
Length: 95, 110, 125, 140 mm
Number of holes: 6, 8, 10, 12 unit
... to the medial anterior and concave to the lateral anterior. Anatomical plate; right & left. 4 hole option between 6- 12. TRUE LOCK Superior Distal Clavicle Anatomic Plates are made of Ti6Al4V ...
Truemed Medical
Length: 60, 80, 100, 120 mm
Number of holes: 6, 8, 10, 12 unit
... all fractures and approximately one third of humerus fractures Anatomical plate; right & left 4 hole option between 6-12 TRUE LOCK Distal Humerus Lateral Anatomic Plates are made of Ti6Al4V ELI ...
Truemed Medical
Shortening Healing Time Less Hospital Stays Faster Sternum Recovery Time Alleviate Patient Nociception and Other Syndromes Lower Risk of Causing Sternum Dehiscence and Facture Reliable Rigid Fixation High-end Titanium ...
... Anatomically pre-contoured plate design supports the reduction of complex fractures • Atraumatic, rounded contour • Universal plate shapes are available in different lengths • Plates ...
AGOMED Medizin-Technik
Thickness: 1.5 mm
... multidirectional system with various plates that have been anatomically adapted to the distal radius & the distal ulna PLATE FEATURES • Rounded edges & a smooth surface for soft tissue protection • ...
AGOMED Medizin-Technik
... -contoured plates is designed for use in the radial head’s “safe zone”. Plates have two proximal rows of screws for better support of the head and two plate bars in the shaft region for ...
AGOMED Medizin-Technik
Number of holes: 2, 14 unit
... and mechanical tested systems for spine surgery according to European medical devices testing center. Posterior cervical plate for screw Ø3,5 and 4 mm
SOFEMED International
Length: 24, 134 mm
... efficient, and mechanical tested systems for spine surgery according to European medical devices testing center. Cervical H-plate for screw Ø2,7 and 3,5 mm
SOFEMED International
Length: 53, 78, 103, 128, 153 mm
Number of holes: 2, 3, 4, 5, 6 unit
SOFEMED efficient, and mechanical tested systems for spine surgery according to European medical devices testing center.
SOFEMED International
Thickness: 6 mm
Hole diameter: 5 mm
Ortholox® Locking Periprosthetic Support Cable-Plate Systems are manufactured of medical degree Ti6Al4V-ELI in compliance with ISO 5832-3 and ASTM F136. Ortholox® Locking Periprosthetic Support Cable-Plate ...
Length: 127, 367 mm
Thickness: 5 mm
Number of holes: 4, 16 unit
... periprosthetic locking cortex screws. The structure of the holes in the shaft part is also compatible with Plate-Band Button Implant and Locking Attachment Plate connection screws. They can be used for ...
Length: 152.5, 110, 134, 170, 201.5 mm
Thickness: 2.5, 1.8 mm
Hole diameter: 1.2, 1.9 mm
... accept both locking and nonlocking screws. The Eonex tibia plates accepts variable angle locking, non-lockingand compression screws indiameters 2.7mm to 3.5mm. ANTEROLATERAL DISTALTIBIAL PLATE •Orientation: ...
Eonex Medical
Length: 60.2, 78.2, 114.8, 101.8, 51.2 mm
Thickness: 2.2, 2 mm
Hole diameter: 1.4, 1.6 mm
... volar distal radius plates accepts variable angle locking, non-lockingand compression screws in diameters 2.0 and 2.4 in distal part of volar plate and 2.7mm to 3.5mm in proximal part ...
Eonex Medical
The Eonex Proximal Humérus Plate Construct consists of a high-strength stabilization plate designed to best accommodate the anatomy and pathology of the proximal humérus. The anatomie curvature of the ...
Eonex Medical
Length: 34 mm
Thickness: 1.5 mm
... Universal Instrument Set Series: Foot and Ankle System Part: N/A Bone: Ankle Description FA L-Locking Plate, left, 34mm FA L-Locking Plate, right, 34mm Additional information Direction Left, Right
Boneunion Medical
Length: 36, 42, 48, 54, 61 mm
Thickness: 1.6 mm
Number of holes: 4, 5, 6, 7, 8 unit
... Fusion Locking Plate, 4 Holes, 36mm Length FA Straight Fusion Locking Plate, 5 Holes, 42mm Length FA Straight Fusion Locking Plate, 6 Holes, 48mm Length FA Straight Fusion Locking ...
Boneunion Medical
Length: 28, 34, 41, 47, 54 mm
Thickness: 1.5 mm
Number of holes: 2, 3, 4, 5, 6 unit
... : Ankle Description FA T-Locking Plate, 2 Holes, 28mm Length FA T-Locking Plate, 3 Holes, 34mm Length FA T-Locking Plate, 4 Holes, 41mm Length FA T-Locking Plate, ...
Boneunion Medical
... range of titanium plates are available to fit the anatomical structures and individual clinical requirements. Titanium Plates Reduced bar thickness at osteotomy for Fast Emergency Access Angular ...
... requires a precise and rigid determination not only of the angles and osteotomies but also of the degree of bending of the plates. Easy handling – can be used immediately Fewer bending operations Basal insertion Smaller ...
Small size FixButton™ AC Plate is suitable for minimally invasive arthroscopic repair. Anatomical radian design perfectly fits the bone surface, distribute stress evenly and has a good fixation effect. Side opening ...
... compared to our standard Universal Mandible reconstruction plates. Proprietary software to select specific plate design features such as profile height, screw hole location, and 3D run of the plate. Allows ...
... Features Cancellous self-drilling screws Pre-contoured and narrow plate design Streamlined universal plate selection MIS and sub-scapular instrumentation Innovative in-situ plate ...
Zimmer Biomet
... degree cone 1.4mm K-wire holes for distal plate positioning Slotted 1.4mm K-wire hole or slotted screw hole to allow for proximal/distal plate adjustments 1.4mm K-wire hole to enable centering of the ...
Smith & Nephew
MatrixMANDIBLE™ Preformed Reconstruction Plates are pre-shaped internal fixation plates for mandible reconstruction procedures and are compatible with MatrixMANDIBLE™ Screws and Instruments. Feature: Preformed ...
Depuy Synthes
Anatomical contoured plate design: Asymmetrical design with left and right specific options Straight edge lines up with bicipital groove for easier plate positioning Sits 1.5cm below Greater Tuberosity ...
A fracture may malunite in the healing process resulting in bone deformity and loss of function. Our patient specific approach improves the accuracy of corrective surgery by providing patient-specific guides and implants. By the use of ...
... stabilization and fixation procedure while the patient is in the lateral decubitus position. Plate teeth provide intra-operative stabilization and prevents post-operative plate rotation Grit-blasted ...
... scaffold to accurately position the greater and lesser tuberosity. Fracture Plate The Equinoxe Fracture Plate is redefining anatomic fracture reconstruction. The locking plate ...
Length: 43, 188 mm
Number of holes: 2, 13 unit
... system is composed of seven plate families designed specifically for the treatment of ankle fractures. The indication-specific plates address fracture patterns of the medial, lateral, and posterior ...
Acumed
Distal Fibular Locking Plate - Locking or compression screw hole provides more clinical options. Thinned distal plate profile to preserve the thin soft tissue envelope of the distal fibula.
Double Medical Technology
The LOQTEQ® Distal Radius Fracture Set includes variable locking plates for the distal radius and the distal ulna. The careful assembly in a compact set with consistent screw diameter allows for a wide range of surgical ...
aap Implantate
Number of holes: 3, 4 unit
... anatomically contoured plates for intraoperative versatility Features and Benefits Robust Polyaxial Locking Designed for stability, the polyaxial locking mechanism allows for ±20° cone of angulation to optimize screw ...
Globus Medical
Length: 44, 143 mm
Number of holes: 6, 15 unit
... non-bendable plates: lateral in 2 sizes (75 and 96 mm), plates with suture holes (size 68 mm), superior lateral midshaft plates in 2 sizes (79 and 93 mm), superior midshaft narrow plates ...
Newclip Technics
Length: 20, 35 mm
... systems made of compatible materials. The system consists of plates and bone screws. All components are made from medical grade titanium or titanium alloy and are supplied clean and non-sterile. Plate ...
Thickness: 0.6, 0.8 mm
Hole diameter: 1.5 mm
Available in 7 bridge lengths CHIN WING PLATES In addition to ‘standard’ genioplasty plates, discover the ‘Chin Wing’ plate, dedicated to genioplasty procedures on the shape of the ...
Global D
... Expanded Plate Offerings – Multiple styles provide versatility and specificity of plate selection. • Dynamic Plating System – Surgeon-controlled compression achieved through a locked ...
Wright Medical Technology
Please specify:
Help us improve:
remaining