Compression plates

Length: 94, 122 mm
Number of holes: 6, 8 unit

For fracture of clavicle Matching Screw: b3.5 Self-tapping Locking Screw; 3.5 Cortical Screw; 3.5 Cancellous Screw;4.0 Cancellous Screw

Length: 135, 69 mm
Number of holes: 3, 8 unit

For fracture of the lateral clavicle and dislocations of the acromioclavicular joint Matching screw: Head: 2.4/2.7 Self-tapping Locking Screw Shaft: 3.5 Self-tapping Locking Screw; 3.5 Cortical screw; 3.5 Cancellous Screw; 4.0 Cancellous Screw

Length: 106, 82 mm
Number of holes: 8, 6 unit

For the reduction and fixation of the clavicle fracture; Matching Screw: 3.5 Self-tapping Locking Screw; 3.5 Cortical screw; 3.5 Cancellous Screw; 4.0 Cancellous Screw

... implants - Variety of implant sizes Features - Threaded shaft screwdriver - Color coding of implants to size - 6 plate screw sizes - 5 plate sizes Indication Posterior cervical decompression in ...

... neck without any backing out of the screws into the soft tissues. Linking these distal and proximal screws with a locking plate gives a much more stable construction with superior rotational stability than would be found ...

Length: 22, 72 mm

System Pre-bended plates with locking system Self-tapping and self-drilling screws 4 different screw sizes and 2 diameters Advantages Locking system in the plate Intuitive instrumentation Fixation ...

... solutions for these injuries, including: Calcaneal Fracture Management System (Includes perimeter and percutaneous plates) 5.0/7.0 mm Compression FT Screws 4.5/6.7 mm LPS Cannulated Screws Trim-It™ ...

Length: 33, 35, 29, 31 mm
Number of holes: 2, 4 unit

... anatomically pre-formed locking plates. Each with a distal long-hole compression slot to compress bone fragments underneath FEATURES Simple surgical technique Anatomically designed plates Integrated, ...

Rib Fixation System Pure titanium plate, light and biocompatible, no iron ions Minimally invasive implantation Easy to fix with special clamps designed for different parts No need to remove after surgery ▪ Applied ...

Indication: Immediate lamina supporting in surgery, best maintain the canal plasty expanded; The lower dentate supporting plate provides a more stable supporting force; Arc openings provide better inclusion; Has certain ...

Length: 69, 95, 121, 134, 160 mm
Number of holes: 8, 5, 12, 11, 10 unit

Humerus Locking Plate Product Introduction Used for humeral shaftfracture. Screw: 10751 3.5 Locking Screw / 10503 3.5 Cortical Screw InstrumentSet: 15001-888 Small Bone FragmentInstrument Set

... Anatomically pre-contoured plate design supports the reduction of complex fractures • Atraumatic, rounded contour • Universal plate shapes are available in different lengths • Plates ...

Thickness: 1.5 mm

... multidirectional system with various plates that have been anatomically adapted to the distal radius & the distal ulna PLATE FEATURES • Rounded edges & a smooth surface for soft tissue protection • ...

... -contoured plates is designed for use in the radial head’s “safe zone”. Plates have two proximal rows of screws for better support of the head and two plate bars in the shaft region for ...

Number of holes: 2, 14 unit

... and mechanical tested systems for spine surgery according to European medical devices testing center. Posterior cervical plate for screw Ø3,5 and 4 mm

Length: 24, 134 mm

... efficient, and mechanical tested systems for spine surgery according to European medical devices testing center. Cervical H-plate for screw Ø2,7 and 3,5 mm

Length: 53, 78, 103, 128, 153 mm
Number of holes: 2, 3, 4, 5, 6 unit

SOFEMED efficient, and mechanical tested systems for spine surgery according to European medical devices testing center.

Thickness: 6 mm
Hole diameter: 5 mm

Ortholox® Locking Periprosthetic Support Cable-Plate Systems are manufactured of medical degree Ti6Al4V-ELI in compliance with ISO 5832-3 and ASTM F136. Ortholox® Locking Periprosthetic Support Cable-Plate ...

Length: 127, 367 mm
Thickness: 5 mm
Number of holes: 4, 16 unit

... periprosthetic locking cortex screws. The structure of the holes in the shaft part is also compatible with Plate-Band Button Implant and Locking Attachment Plate connection screws. They can be used for ...

245.0280425.15 - ￠3.5 Medial Malleolus Tooth Plate,Short 245.0280625.15 - ￠3.5 Medial Malleolus Tooth Plate,Long Matched Screw: ￠3.5 Locking Screw ￠3.5 Cortical Screw

245.0280325.15 - ￠3.5 Medial Malleolus Hook Plate,Short 245.0280525.15 - ￠3.5 Medial Malleolus Hook Plate,Long Matched Screw: ￠3.5 Locking Screw ￠3.5 Cortical Screw

Number of holes: 9, 11, 3, 5, 7 unit

245.1300325.15 - ￠2.7/￠3.5 Distal Fibula VA-Loc LCP 3H,L 245.2300325.15 - ￠2.7/￠3.5 Distal Fibula VA-Loc LCP 3H,R 245.1300525.15 - ￠2.7/￠3.5 Distal Fibula VA-Loc LCP 5H,L 245.2300525.15 - ￠2.7/￠3.5 Distal Fibula VA-Loc LCP 5H,R 245.1300725.15 ...

Length: 90, 210, 126, 138, 114 mm
Thickness: 3 mm
Number of holes: 4, 5, 10, 6, 13 unit

... including one elongated hole that helps in plate positioning In the long plate distal shaft consists of 7-13 elongated combi holes Plates can be used with the LISS Plate ...

Length: 95, 119, 68 mm
Thickness: 3 mm
Number of holes: 4, 6, 8 unit

This plate is designed to be used in shaft fractures of clavicle bone pre-contoured design matches the natural S-shape of the clavicle, no need to bend during the surgery. High grade titanium plate ...

Length: 138, 68, 82, 96, 124 mm
Thickness: 3 mm
Number of holes: 8, 3, 4, 5, 6 unit

This Plate is designed to provide fracture fixation and stability for lateral third clavicle fractures, malunions, and nonunions. It is designed to anatomically fit the distal clavicle Multiple distal screw configurations ...

Shortening Healing Time Less Hospital Stays Faster Sternum Recovery Time Alleviate Patient Nociception and Other Syndromes Lower Risk of Causing Sternum Dehiscence and Facture Reliable Rigid Fixation High-end Titanium ...

Length: 290, 190, 240, 245, 50 mm
Number of holes: 10, 8, 2, 4, 6 unit

... hole in all plate or grip sizes allow for placement of either a compression or locking screw for maximum flexibility and effectiveness in reconstructing complex fractures and osteotomies. Features ...

... Non-locking Screws Available - Anatomically Pre-contoured Plate Design - Off-set screw holes • 1.5mm, 1.8mm, 2.0mm and 2.3mm screw sizes • 0.6mm, 1.0mm, and 1.3mm plate thicknesses • Comprehensive ...

... Distal Radius Locking Plate Intended for use in temporary internal fixation and stabilization of fractures, osteotomies, and non-unions of the distal radius ARIX Wrist System - Volar Distal Radius Locking Plate ...

ARIX Clavicle Plate System The ARIX Clavicle System is indicated for the fixation of single, segmental and comminuted fractures, osteotomies, mal-unions, and non-unions of the clavicle. The ARIX Clavicle System is a ...

Length: 106, 274 mm
Thickness: 3.5 mm
Number of holes: 3, 15 unit

Distal Medial Tibial LCP (L&R) The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based upon ...

Length: 113, 373 mm
Thickness: 5.6 mm
Number of holes: 2, 3, 15 unit

Proximal Femoral Serpentine LCP (L&R) The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based ...

Length: 60, 147 mm
Thickness: 3.2 mm
Number of holes: 5, 12 unit

The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based upon the anatomical fixation required. TC20: ...

Number of holes: 8, 9, 6, 7, 10 unit

S-Clavicle Locking Compression Plate II - Used for clavicle shaft fracture. - Screw: 11.107.51 3.5 Locking Screw 11.105.03 3.5 Cortical Screw 11.105.20 4.0 Cancellous Screw - Instrument Set: ...

Number of holes: 4 unit

Laminoplasty Plate-VENUS In the posterior cervical open-door operation, it can achieve real-time lamina support function, and maximum maintain spinal canal enlarging state in laminoplasty The support piece specially ...

Number of holes: 8, 5, 6, 3, 4 unit

Extremitas Acromialis Clavicle Locking Compression Plate - Standard type is used for acromial end of clavicle fracture. Extra-long type is used for acromial end and shaft of clavicle fracture. - ...

Length: 90, 230 mm
Number of holes: 3, 12 unit

TRUE LOCK Proximal Humerus Anatomic Plates are indicated for fractures and fracture dislocations, osteotomies, and nonunions of the proximal humerus, particularly for patients with osteopenic bone. Proximal humerus ...

Length: 95, 110, 125, 140 mm
Number of holes: 6, 8, 10, 12 unit

... to the medial anterior and concave to the lateral anterior. Anatomical plate; right & left. 4 hole option between 6- 12. TRUE LOCK Superior Distal Clavicle Anatomic Plates are made of Ti6Al4V ...

Length: 60, 80, 100, 120 mm
Number of holes: 6, 8, 10, 12 unit

... all fractures and approximately one third of humerus fractures Anatomical plate; right & left 4 hole option between 6-12 TRUE LOCK Distal Humerus Lateral Anatomic Plates are made of Ti6Al4V ELI ...

... fit to a wide range of anatomies• facilitate anatomical reduction• „watershed line” profileMultiple plate options• system consists of 2 types of plates:-with styloid process extension-without extension ...

... not protrude above the surface of the plate what significantly reduces tissue irritation• increased strength of the screw-to-plate threaded connectionCompression hole• oblong hole for plate ...

... foot Product plate System 4.0ChLP ENDOSTEAL PLATESDesign aligned with the anatomy• optimized anatomical profile• fit to a wide range of anatomies• facilitate anatomical reductionMultiple plate options• ...

• Increase canal space • Easy-release screwdriver • Tab allows for secure positioning on the lamina • 5 plate sizes and two types of screw (Self drilling and rescue screw)

This plate and screw system used with PIONEER small instrument system

This plate and screw system used with PIONEER small instrument system

Length: 167, 87 mm
Hole diameter: 3.5, 4 mm
Number of holes: 10, 12, 14, 8 unit

... joint replacement, hip prosthesis, knee prosthesis, orthopedic implants, orthopedic prosthesis, fragment plate system, plate system, proximal locking plate, femural nail, proxim It ...

Number of holes: 8, 10, 12, 14, 16 unit

Locking Proximal Medial Tibial Plate Ø 5.0 - Ø 4.5 mm screw

Number of holes: 8, 10, 12, 14, 16 unit

Locking Proximal Lateral Tibial L Plate Ø 5.0 - Ø 4.5 mm screw

Length: 41, 201 mm
Number of holes: 2, 12 unit

Semi-tubular plate Recommended screw : cortical screw Ø 4.5 or Ø 5 mm

Length: 27, 123 mm
Number of holes: 2, 10 unit

1/3 tubular plates Recommended screw : cortical screw Ø 3.5 or Ø 4 mm

Length: 25, 65 mm
Number of holes: 3, 8 unit

1/4 tubular plates Recommended screw :cortical screw Ø 2.7 mm For the 2 furthest holes : cortical screw Ø 3.5 mm

... quantities of plates and screws Low profile – low risk of tissue irritation Variable screw angulations Screws interlock with the plate – low risk of screw back-out Flexible placement of the screws Transparent ...

... from 1.3dia to 2.0dia while plates have various thickness of 0.4, 0.5, 0.7, 0.8 and 1.0t. Special designed plates for orthognathics surgery can be very helpful for surgeons. -All srews are compatible ...

... surgery and orthognathic surgrey. There are 2.0 Lock/Unlock, 2.4 lock and unlock in the system. Each block has various kinds of plates to cover with mandibular surgery. And, each system can be used independantly for ...

... surgery and orthognathic surgrey. There are 2.0 Lock/Unlock, 2.4 lock and unlock in the system. Each block has various kinds of plates to cover with mandibular surgery. And, each system can be used independantly for ...