Titanium compression plates

Length: 94, 122 mm
Number of holes: 6, 8 unit

For fracture of clavicle Matching Screw: b3.5 Self-tapping Locking Screw; 3.5 Cortical Screw; 3.5 Cancellous Screw;4.0 Cancellous Screw

Length: 135, 69 mm
Number of holes: 3, 8 unit

For fracture of the lateral clavicle and dislocations of the acromioclavicular joint Matching screw: Head: 2.4/2.7 Self-tapping Locking Screw Shaft: 3.5 Self-tapping Locking Screw; 3.5 Cortical screw; 3.5 Cancellous Screw; 4.0 Cancellous Screw

Length: 106, 82 mm
Number of holes: 8, 6 unit

For the reduction and fixation of the clavicle fracture; Matching Screw: 3.5 Self-tapping Locking Screw; 3.5 Cortical screw; 3.5 Cancellous Screw; 4.0 Cancellous Screw

Hole diameter: 2.7, 3.5 mm

... consists of the following sub-categories: JY/WX Calcaneus Locking Compression Plates (LCPs) JY/WX Tibia Fibula LCPs WX 2.7mm Forefoot Midfoot Locking Fusion Plates WX 2.5mm Micro ...

High quality implants for bone fixation of Craniomaxillofacial fractures, orthognathic and reconstructive surgery

Length: 55, 63, 79, 95 mm

- Compression technology - Pure titanium plate - Low profile, pre-contoured, perfect fit

Rib Fixation System Pure titanium plate, light and biocompatible, no iron ions Minimally invasive implantation Easy to fix with special clamps designed for different parts No need to remove after ...

Length: 227, 155, 119, 101, 191 mm
Number of holes: 8, 6, 5, 4, 3 unit

Dynamic Hip Screw Locking Plate Product Introduction Used for femoral trochanterfracture. Screw: Head Part 10403 Lag Screw Shaft Part 10755,10757 5.0 Locking Screw Instrument Set: 15003-888 ...

Length: 143, 175, 207, 239 mm
Number of holes: 6, 8, 10, 12 unit

Dynamic Condylar Screw Locking Plate Product Introduction Used for femoral condylar fracture. Screw: Head Part 10403 Lag Screw Shaft Part 10755,10757 5.0 Locking Screw Instrument Set: ...

• Primary or secondary closure/repair of the sternum following sternotomy or fracture of the sternum to stabilize the sternum and promote fusion. SPECIFICATION • Safely full close of the sternum. • Allow the patients to recover ...

... Comprehensive plates and screws to treat full range of hand fractures • Anatomically pre-contoured plate design for hand • Ø 1.5 / 2.0 Screws (locking/non-locking) • Low profile plate ...

• Different sizes and types of plates for various cases • Anatomically designed for optimal fitting • Low profile but enough rigidity • Oblong hole for plate position adjustment • Ø1.5 mm ...

Thickness: 3.5 mm

... clavicle. Product Features • Ø 2.5 mm & Ø 3.5 mm Locking Screws • Both bidirectional compression hole /unidirectional compression exist in one plate • Fracture of the lateral ...

Length: 98, 332 mm
Number of holes: 18, 5 unit

Model Number: SDYZ-03 Femoral Limited Contact Locking Plate (LCP) Certificate: CE/ISO 13485 The surface of the product is colored anodized. Non-sterile packaging.

Length: 136, 416 mm
Thickness: 5.5 mm
Number of holes: 4, 18 unit

... product is colored anodized. Non-sterile packaging. Features Certificate: CE/ISO 13485 Distal femoral lateral locking plate locking hole with the use of 5.0 screws.

Length: 207, 64 mm
Number of holes: 3, 14 unit

... is colored anodized. Non-sterile packaging. Features Certificate: CE/ISO 13485 The distal humerus medial locking plate heads with 2.4/2.7 locking screws, Bing locking holes with 3.5 locking screws used.

Length: 88, 101, 138, 114, 124 mm
Number of holes: 7, 10, 9, 6, 8 unit

- Used for clavicle shaft fracture. - Screw: 11.107.51 3.5 Locking Screw 11.105.03 3.5 Cortical Screw 11.105.20 4.0 Cancellous Screw - Instrument Set: 15001888 Samll Bone Fragment Instrument Set

Number of holes: 8, 5, 6, 3, 4 unit

Extremitas Acromialis Clavicle Locking Compression Plate - Standard type is used for acromial end of clavicle fracture. Extra-long type is used for acromial end and shaft of clavicle fracture. - ...

Number of holes: 6, 4, 7, 5 unit

- Used for fracture of acromial end of clavicle (Neer II), dislocation of acromioclavicular joint (Tossy III). - Screw: 11.107.51 3.5 Locking Screw 11.105.03 3.5 Cortical Screw 11.105.20 4.0 Cancellous Screw - Instrument ...

Length: 106, 274 mm
Thickness: 3.5 mm
Number of holes: 15, 3 unit

The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based upon the anatomical fixation required. Features It ...

Length: 373, 113 mm
Thickness: 5.6 mm
Number of holes: 3, 2, 15 unit

The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based upon the anatomical fixation required. Features It ...

Length: 147, 60 mm
Thickness: 3.2 mm
Number of holes: 5, 12 unit

The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based upon the anatomical fixation required. TC20: ...

Length: 112.5, 78, 231.5, 180, 299.5 mm
Thickness: 7 mm
Hole diameter: 6.5, 4.5, 5 mm

DHS Plate 135 °: Locked DHS Plate 135 0 is indicated for intertrochanteric fractures, subtrochanteric fractures and femoral neck fractures. Used with 05 mm locking screw, 04,5 mm. cortical screw and 06,5 ...

... Acetabular Reconstruction Plate 255.1141632.15 - ￠3.5/￠4.0 Posterior Acetabular-H Plate,16H L 255.2141632.15 - ￠3.5/￠4.0 Posterior Acetabular-H Plate,16H R 255.1140932.15 - ￠3.5/￠4.0 ...

￠3.5/￠4.0 Pelvic Supra-pectineal Reconstruction Plate 255.1191632.15 - ￠3.5/￠4.0 Supra-pectineal Reconstruction Plate,Large L 255.2191632.15 - ￠3.5/￠4.0 Supra-pectineal Reconstruction Plate,Large ...

245.0280425.15 - ￠3.5 Medial Malleolus Tooth Plate,Short 245.0280625.15 - ￠3.5 Medial Malleolus Tooth Plate,Long Matched Screw: ￠3.5 Locking Screw ￠3.5 Cortical Screw

The Aplus Mini Volar Locking Plate is designed based on analysis from the Asian bone database, specifically tailored to the optimal bone curvature of Asian individuals. The plate is shaped to better fit ...

Length: 79.4, 240 mm

The Aplus Rib Locking Plate is designed based on analysis from the Asian bone database, specifically tailored to the bone curvature of Asian individuals. The plate is shaped to better fit the rib in Asian ...

Length: 90, 210 mm

The Aplus Proximal Lateral Humerus Locking Plate is designed based on analysis from the Asian bone database, specifically tailored to the bone curvature of Asian individuals. The plate is shaped to better ...

Hole diameter: 2.7, 3.5 mm
Number of holes: 11, 12, 13, 14 unit

Used Screws Ø2.7 Cortical Screw & Ø2.7 Locked Screw Ø3.5 Cortical Screw & Ø3.5 Locked Screw

Hole diameter: 3.5 mm
Number of holes: 7, 6, 8 unit

Used Screws Ø3.5 Cortical Screw & Ø3.5 Locked Screw Ø4.0 Spongioz Locked Screw

Hole diameter: 3.5 mm
Number of holes: 6, 5, 7 unit

Used Screws Ø3.5 Cortical Screw & Ø3.5 Locked Screw Ø4.0 Spongioz Locked Screw

Length: 90 mm
Number of holes: 8 unit

Recommended titanium screw : Ø 3,5 or Ø 4 mm cortical, or Ø 4 mm cancellous

Thickness: 0.8, 1.2 mm

... allow to manage a wide range of fractures within the hand. The bevelled edges of the plates and the design of locking holes (screw heads do not protrude above the plate surface) significantly reduce ...

Length: 222, 384 mm
Hole diameter: 5 mm
Number of holes: 6, 8, 10, 12, 2 unit

... the plate what significantly reduces the irritation of periimplant tissues, • cortical screws use possible. • K-wire holes in shaft and epiphysis: • facilitated plate positioning over the prosthesis • ...

Length: 56, 66 mm
Number of holes: 5, 4 unit

... Bottom undercuts of the shaft part • limited bone-to-plate contact • better blood circulation of periimplant tissues Compression hole • oblong hole for plate positioning • ...

Hole diameter: 2.7, 2.4 mm
Number of holes: 14, 3 unit

The VOLAR-e Plating System is Astrolabe's new concept for Distal Radius Plates. It consists of an innovative system of variable angle locking plates SmartFix, in addition to other exclusive features ...

Hole diameter: 3.5, 2.7 mm
Number of holes: 11, 3 unit

... s Distal Fibula 2,7/3,5mm combines the strong fixation of fixed angle construct with the compression holes in the same plate (LIVTrauma). The Distal Fibula Plates are indicated for fractures, ...

Hole diameter: 3.5 mm
Number of holes: 5, 8, 10, 6 unit

The Astrolabe’s Malleolus 3,5 is indicated for distal and lateral fractures of the malleolus bone.

... Nociception and Other Syndromes Lower Risk of Causing Sternum Dehiscence and Facture Reliable Rigid Fixation High-end Titanium Alloy Materials Utilized 3D HugTM Fixation Design Concise Instrument Set User ...

... universal plate hole shapes • plates include an elongated k-wire hole and a compression hole • secure closure of the fracture CONTRAINDICATIONS • nadequate bone quantity • ...

TITANIUM REVISION PLATE 4001205 Size S, pack/1 4001204 Size S, pack/1 4001207 Size M, pack/1 4001206 Size M, pack/1 4001209 Size L, pack/1 4001208 Size L, pack/1

Length: 20, 24, 16 mm
Number of holes: 2, 3 unit

EVANS TITANIUM PLATE 4004372 3-holes, 16 mm, small size 4004374 3-holes, 20 mm, medium size 4004376 3-holes, 24 mm, large size 4004373 3-holes, 16 mm, small size 4004375 3-holes, 20 mm, medium ...

Length: 53, 78, 103, 128, 153 mm
Number of holes: 2, 3, 4, 5, 6 unit

SOFEMED efficient, and mechanical tested systems for spine surgery according to European medical devices testing center.

Number of holes: 3, 4, 5, 6 unit

Straight mini plate for screw Ø1,5 and 2,0 mm Holes 3 4 5 6

Number of holes: 4, 5 unit

L-mini plate for screw Ø1,5 and 2,0 mm Holes (Head) 2 Holes (Plate) 2 3

Thickness: 6 mm
Hole diameter: 5 mm

Ortholox® Locking Periprosthetic Support Cable-Plate Systems are manufactured of medical degree Ti6Al4V-ELI in compliance with ISO 5832-3 and ASTM F136. Ortholox® Locking Periprosthetic Support Cable-Plate ...

Length: 127, 367 mm
Thickness: 5 mm
Number of holes: 4, 16 unit

... periprosthetic locking cortex screws. The structure of the holes in the shaft part is also compatible with Plate-Band Button Implant and Locking Attachment Plate connection screws. They can be used for ...

Length: 34 mm
Thickness: 1.5 mm

... Universal Instrument Set Series: Foot and Ankle System Part: N/A Bone: Ankle Description FA L-Locking Plate, left, 34mm FA L-Locking Plate, right, 34mm Additional information Direction Left, Right

Length: 42, 36, 54, 48, 61 mm
Thickness: 1.6 mm
Number of holes: 6, 8, 4, 7, 5 unit

... Fusion Locking Plate, 4 Holes, 36mm Length FA Straight Fusion Locking Plate, 5 Holes, 42mm Length FA Straight Fusion Locking Plate, 6 Holes, 48mm Length FA Straight Fusion Locking ...

Length: 41, 28, 54, 34, 47 mm
Thickness: 1.5 mm
Hole diameter: 6.5 mm

... : Ankle Description FA T-Locking Plate, 2 Holes, 28mm Length FA T-Locking Plate, 3 Holes, 34mm Length FA T-Locking Plate, 4 Holes, 41mm Length FA T-Locking Plate, ...

... chamfering of bone plate, lower notch, reduce soft tissue irritation 2. Compression hole design, convenient for intraoperative compression fixation and adjustment of the position of ...

Length: 50, 290 mm
Number of holes: 8, 4, 2, 10, 6 unit

... hole in all plate or grip sizes allow for placement of either a compression or locking screw for maximum flexibility and effectiveness in reconstructing complex fractures and osteotomies. Features ...

Length: 62, 158 mm
Thickness: 4 mm

Diaphysis Plate is locking plates that allows neutralization, tension band principle, bridging and compression while working as a support plate in the fixation of diaphyseal ...

Length: 49, 145 mm
Thickness: 1.5 mm

... their tubular surface structure, 1/3 Tubular Plates are used as buttress plates in bones. Features The plate is suitable for use with 3.5 mm diameter locking and non-locking cortical ...