Locking compression plates

Length: 94, 122 mm
Number of holes: 6, 8 unit

For fracture of clavicle Matching Screw: b3.5 Self-tapping Locking Screw; 3.5 Cortical Screw; 3.5 Cancellous Screw;4.0 Cancellous Screw

Length: 135, 69 mm
Number of holes: 3, 8 unit

... clavicle and dislocations of the acromioclavicular joint Matching screw: Head: 2.4/2.7 Self-tapping Locking Screw Shaft: 3.5 Self-tapping Locking Screw; 3.5 Cortical screw; 3.5 Cancellous Screw; 4.0 ...

Length: 106, 82 mm
Number of holes: 8, 6 unit

For the reduction and fixation of the clavicle fracture; Matching Screw: 3.5 Self-tapping Locking Screw; 3.5 Cortical screw; 3.5 Cancellous Screw; 4.0 Cancellous Screw

... femoral neck without any backing out of the screws into the soft tissues. Linking these distal and proximal screws with a locking plate gives a much more stable construction with superior rotational stability ...

Hole diameter: 2.7, 3.5 mm

... consists of the following sub-categories: JY/WX Calcaneus Locking Compression Plates (LCPs) JY/WX Tibia Fibula LCPs WX 2.7mm Forefoot Midfoot Locking Fusion Plates WX ...

Length: 55, 63, 79, 95 mm

- Compression technology - Pure titanium plate - Low profile, pre-contoured, perfect fit

Length: 144, 180, 216, 252, 288 mm

- Compression technology - Pure titanium plate - Low profile, pre-contoured, perfect fit

Length: 69, 95, 121, 134, 160 mm
Number of holes: 8, 5, 12, 11, 10 unit

Humerus Locking Plate Product Introduction Used for humeral shaftfracture. Screw: 10751 3.5 Locking Screw / 10503 3.5 Cortical Screw InstrumentSet: 15001-888 Small ...

Length: 90, 116, 142, 168, 194 mm
Number of holes: 5, 3, 11, 9, 7 unit

Proximal Humeral Locking Plate II（L/R） Product Introduction Used for proximal humeralfracture. Screw: 10751 3.5 Locking screw / 10503 3.5 Cortical Screw 10520,10521 ...

Length: 58, 84, 110, 162, 188 mm
Number of holes: 3, 12, 9, 7, 5 unit

Distal Medial Humeral Locking Plate（L/R） Product Introduction Used for distal medial humeralfracture, supracondylar fracture of humerus and nonunions of humeral fracture Screw: Head Part 10960 ...

• Plate Features •The two proximal plate holes are threaded and accept 7.3 mm cannulated screws (locking, conical fully threaded, or conical partially threaded). •The third locking ...

Thickness: 1 mm
Number of holes: 3, 14 unit

• Hand, wrist diseases and congenital anomalies of the hands. SPECIFICATIONS • 1.0 mm thick plates and self taping screws. • The plates are bended according to the bone’s natural shapes.

• Primary or secondary closure/repair of the sternum following sternotomy or fracture of the sternum to stabilize the sternum and promote fusion. SPECIFICATION • Safely full close of the sternum. • Allow the patients to recover ...

Thickness: 0.6, 0.8, 1 mm

... and chin. Product Features Orthognathic Plate • Straight / L /Pre-bent L / Pre-bent Chin /BSSO / Compression / AJ / MG Plate Orthognathic Screw • Ø 2.0 mm Mini screws • ...

Thickness: 0.6, 1.3, 0.8, 1 mm

... compatibility Locking and Cortical Screws can be used in a same plate hole • Mini and Maxi locking plates accept both of locking and cortical screws ...

... Comprehensive plates and screws to treat full range of hand fractures • Anatomically pre-contoured plate design for hand • Ø 1.5 / 2.0 Screws (locking/non-locking) • ...

Length: 98, 332 mm
Number of holes: 18, 5 unit

Model Number: SDYZ-03 Femoral Limited Contact Locking Plate (LCP) Certificate: CE/ISO 13485 The surface of the product is colored anodized. Non-sterile packaging.

Length: 136, 416 mm
Thickness: 5.5 mm
Number of holes: 4, 18 unit

... product is colored anodized. Non-sterile packaging. Features Certificate: CE/ISO 13485 Distal femoral lateral locking plate locking hole with the use of 5.0 screws.

Length: 207, 64 mm
Number of holes: 3, 14 unit

... Non-sterile packaging. Features Certificate: CE/ISO 13485 The distal humerus medial locking plate heads with 2.4/2.7 locking screws, Bing locking holes with ...

Length: 88, 101, 138, 114, 124 mm
Number of holes: 7, 10, 9, 6, 8 unit

- Used for clavicle shaft fracture. - Screw: 11.107.51 3.5 Locking Screw 11.105.03 3.5 Cortical Screw 11.105.20 4.0 Cancellous Screw - Instrument Set: 15001888 Samll Bone Fragment Instrument Set

Number of holes: 8, 5, 6, 3, 4 unit

... Acromialis Clavicle Locking Compression Plate - Standard type is used for acromial end of clavicle fracture. Extra-long type is used for acromial end and shaft of clavicle fracture. - ...

Number of holes: 6, 4, 7, 5 unit

... fracture of acromial end of clavicle (Neer II), dislocation of acromioclavicular joint (Tossy III). - Screw: 11.107.51 3.5 Locking Screw 11.105.03 3.5 Cortical Screw 11.105.20 4.0 Cancellous Screw - ...

Length: 106, 274 mm
Thickness: 3.5 mm
Number of holes: 15, 3 unit

The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based upon the anatomical fixation required. Features It ...

Length: 373, 113 mm
Thickness: 5.6 mm
Number of holes: 3, 2, 15 unit

The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based upon the anatomical fixation required. Features It ...

Length: 147, 60 mm
Thickness: 3.2 mm
Number of holes: 5, 12 unit

The SurgTech Trauma System is a plate and screw fixation system. Plates and screws are offered in “mini”,“small” and “large” set sizes in a variety of shapes based upon the anatomical fixation required. TC20: ...

Length: 167, 87 mm
Hole diameter: 3.5, 4 mm
Number of holes: 14, 8, 10, 12 unit

Locking Distal Lateral Humeral Plate Ø 3,5 - Ø 4.0 mm screw

Number of holes: 14, 12, 16, 10, 8 unit

Locking Proximal Medial Tibial Plate Ø 5.0 - Ø 4.5 mm screw

Number of holes: 12, 10, 16, 14, 8 unit

Locking Proximal Lateral Tibial L Plate Ø 5.0 - Ø 4.5 mm screw

245.0280425.15 - ￠3.5 Medial Malleolus Tooth Plate,Short 245.0280625.15 - ￠3.5 Medial Malleolus Tooth Plate,Long Matched Screw: ￠3.5 Locking Screw ￠3.5 Cortical Screw

245.0280325.15 - ￠3.5 Medial Malleolus Hook Plate,Short 245.0280525.15 - ￠3.5 Medial Malleolus Hook Plate,Long Matched Screw: ￠3.5 Locking Screw ￠3.5 Cortical Screw

Number of holes: 9, 11, 3, 5, 7 unit

... Distal Fibula VA-Loc LCP 11H,L 245.2301125.15 - ￠2.7/￠3.5 Distal Fibula VA-Loc LCP 11H,R Matched Screw: ￠2.7 Locking Screw ￠3.5 Locking Screw ￠3.5 Cortical Screw

The Aplus Mini Volar Locking Plate is designed based on analysis from the Asian bone database, specifically tailored to the optimal bone curvature of Asian individuals. The plate is shaped ...

Length: 79.4, 240 mm

The Aplus Rib Locking Plate is designed based on analysis from the Asian bone database, specifically tailored to the bone curvature of Asian individuals. The plate is shaped to better ...

Length: 90, 210 mm

The Aplus Proximal Lateral Humerus Locking Plate is designed based on analysis from the Asian bone database, specifically tailored to the bone curvature of Asian individuals. The plate ...

Hole diameter: 2.7, 3.5 mm
Number of holes: 11, 12, 13, 14 unit

Used Screws Ø2.7 Cortical Screw & Ø2.7 Locked Screw Ø3.5 Cortical Screw & Ø3.5 Locked Screw

Hole diameter: 3.5 mm
Number of holes: 7, 6, 8 unit

Used Screws Ø3.5 Cortical Screw & Ø3.5 Locked Screw Ø4.0 Spongioz Locked Screw

Hole diameter: 3.5 mm
Number of holes: 6, 5, 7 unit

Used Screws Ø3.5 Cortical Screw & Ø3.5 Locked Screw Ø4.0 Spongioz Locked Screw

Length: 295, 103 mm
Number of holes: 18, 6 unit

Wide locking plate / Round holes Recommended screw : cortical locking screw Ø 4.5 mm

Length: 38, 295 mm
Number of holes: 2, 22 unit

Narrow plate Oval holes Holes 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Length en mm 38 50 62 74 86 98 110 122 134 146 158 170 182 194 206 218 230 242 254 266 278 295

Length: 39, 295 mm
Number of holes: 18, 2 unit

Narrow locking plate / Round holes Recommended screw : cortical locking screw Ø 3.5 or Ø 4 mm, cancellous Ø 4 mm

Thickness: 0.8, 1.2 mm

... within the hand. The bevelled edges of the plates and the design of locking holes (screw heads do not protrude above the plate surface) significantly reduce the irritation of peri-implant ...

Length: 222, 384 mm
Hole diameter: 5 mm
Number of holes: 6, 8, 10, 12, 2 unit

... allowed. Femoral periprosthetic plates are a part of 7.0ChLP system.This system includes also compatible locking screws. To facilitate their identification, both titanium plate and ...

Length: 56, 66 mm
Number of holes: 5, 4 unit

... provisional plate positioning • mimic periarticular screws trajectory Bottom undercuts of the shaft part • limited bone-to-plate contact • better blood circulation of periimplant tissues Compression ...

Hole diameter: 2.7, 2.4 mm
Number of holes: 14, 3 unit

... for Distal Radius Plates. It consists of an innovative system of variable angle locking plates SmartFix, in addition to other exclusive features that brings countless benefits to both ...

Hole diameter: 3.5, 2.7 mm
Number of holes: 11, 3 unit

... s Distal Fibula 2,7/3,5mm combines the strong fixation of fixed angle construct with the compression holes in the same plate (LIVTrauma). The Distal Fibula Plates are indicated for fractures, ...

Hole diameter: 3.5 mm
Number of holes: 5, 8, 10, 6 unit

The Astrolabe’s Malleolus 3,5 is indicated for distal and lateral fractures of the malleolus bone.

... screws are distinguished through universal plate hole shapes • plates include an elongated k-wire hole and a compression hole • secure closure of the fracture CONTRAINDICATIONS • ...

Thickness: 3, 4 mm
Hole diameter: 4 mm
Number of holes: 9, 10 unit

• Plate hole accepts 4.0 mm locking and non-locking screws • Maximum fixation points within each plate • Anatomically designed for use surgical approaches: anterior •External ...

TITANIUM REVISION PLATE 4001205 Size S, pack/1 4001204 Size S, pack/1 4001207 Size M, pack/1 4001206 Size M, pack/1 4001209 Size L, pack/1 4001208 Size L, pack/1

Number of holes: 2, 14 unit

... and mechanical tested systems for spine surgery according to European medical devices testing center. Posterior cervical plate for screw Ø3,5 and 4 mm

Length: 24, 134 mm

... efficient, and mechanical tested systems for spine surgery according to European medical devices testing center. Cervical H-plate for screw Ø2,7 and 3,5 mm

Length: 53, 78, 103, 128, 153 mm
Number of holes: 2, 3, 4, 5, 6 unit

SOFEMED efficient, and mechanical tested systems for spine surgery according to European medical devices testing center.

Thickness: 6 mm
Hole diameter: 5 mm

Ortholox® Locking Periprosthetic Support Cable-Plate Systems are manufactured of medical degree Ti6Al4V-ELI in compliance with ISO 5832-3 and ASTM F136. Ortholox® Locking Periprosthetic ...

Length: 127, 367 mm
Thickness: 5 mm
Number of holes: 4, 16 unit

... they are used with 5.0mm locking cortex screws, 5.0mm Blunt tip periprosthetic locking cortex screws. The structure of the holes in the shaft part is also compatible with Plate-Band ...

Length: 34 mm
Thickness: 1.5 mm

FA L-Locking Plate 34mm Thickness: 1.5mm Width: 7.5mm Hole Spacing: 6.3mm Material: Ti-6Al-4V Screws: FA 2.4/2.7mm Locking Screw/Cortex Screw Instrument: FA Fusion and Deformity ...

Length: 42, 36, 54, 48, 61 mm
Thickness: 1.6 mm
Number of holes: 6, 8, 4, 7, 5 unit

... Fusion Locking Plate, 4 Holes, 36mm Length FA Straight Fusion Locking Plate, 5 Holes, 42mm Length FA Straight Fusion Locking Plate, ...

Length: 41, 28, 54, 34, 47 mm
Thickness: 1.5 mm
Hole diameter: 6.5 mm

... Bone: Ankle Description FA T-Locking Plate, 2 Holes, 28mm Length FA T-Locking Plate, 3 Holes, 34mm Length FA T-Locking Plate, ...

... chamfering of bone plate, lower notch, reduce soft tissue irritation 2. Compression hole design, convenient for intraoperative compression fixation and adjustment of the position of ...

... temporarily fixed with Kirschner wire 4. Long slotted hole, convenient for bone plate position adjustment and bone block compression 5. Can be used with 5.0mm locking screw, 4.5mm ...

Number of holes: 2, 12 unit

1. The screw has a strong internal fixation effect on the bone, and can be effectively fixed even in the case of osteoporosis 2. The sliding mechanism in the sleeve can prevent the nail end from penetrating the knee joint, femoral head ...

Length: 50, 290 mm
Number of holes: 8, 4, 2, 10, 6 unit

... system of trochanteric grips and cable-plates utilizes the clinically proven SuperCable® polymer cerclage system, while also providing the unique option for use of either compression or locking ...

This plate and screw system used with PIONEER small instrument system

This plate and screw system used with PIONEER small instrument system

This plate and screw system used with PIONEER small instrument system

... Anatomically contoured plates meets both simple and multi fractures - Variable angle locking holes in the head of the plate provide a locked construct to support the articular surface ...

... pre-contoured plate and screw provide multidirectional angular stability on variety case of fracture. - Four head sizes accommodate patient anatomical condition. - All plate holes are compatibly matched ...