Dry heat sterilizers

Capacity: 330 l - 10,000 l

... Overview
The SD Series is a hot-air sterilizer and depyrogenation oven designed for depyrogenation in aseptic pharmaceutical processes using controlled hot, dry air. It reduces endotoxin levels under Class 100 ...

Capacity: 330 l - 10,000 l
Temperature range: 220 °C - 280 °C

... The SD Series supports depyrogenation in aseptic processes, using controlled hot, dry air to reduce endotoxin levels under Class 100 / ISO Class 5 conditions. Airflow and temperature control are designed for uniform results across different ...

Capacity: 60 l - 5,000 l
Temperature range: 25 °C - 250 °C

... systems are available: Hot air through internai heating elements with circulating air system Using hot water and/or superheated steam for saturated steam and/or steam-air mixture Process The high pressure autoclaves ...

Capacity: 2 l
Temperature range: 160, 180 °C
Width: 120 mm

... made of stainless steel • Structure entirely made of epoxy coated steel • Electromechanical control • Natural convection • Heat insulated with fiberglass • Time regulation from 0 to 120 minutes and infinite time • Analogic display ...

... THE PERFECT SOLUTION FOR DRY- HEAT STERILIZATION AND DEPYROGENATION NEEDS. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the ...

Capacity: 56 l
Carrying capacity: 25 kg
Temperature range: 250 °C

... – drying of laboratory glass – hot-air sterilization ...

Capacity: 50 l - 150 l
Temperature range: 30 °C - 300 °C
Width: 785, 705 mm

Capacity: 3 l
Temperature range: 0 °C - 200 °C
Width: 30 cm

... • OUTER CASE MADE OF STAINLESS STEEL. • INNER STRUCTURE SUPPLIED WITH GRID, REMOVABLE PERFORATED TRAY, HINGED LID COMPLETELY MADE OF STAINLESS STEEL. • INNER STRUCTURE AND LID WITH NONTOXIC SILICON RUBBER GASKET, INSULATED BY HIGH GRADE GLASS WOOL. ...

Capacity: 150 l
Temperature range: 0 °C - 138 °C
Width: 660 mm

... top-sellers worldwide! Why? Because vertical autoclaves can accommodate the tallest flasks, fermentors, and bioreactors at one-third the price of a comparable front-loading autoclave. Priorclave’s top loading autoclaves ...

Capacity: 4 l
Temperature range: 134 °C

... The world’s favorite handpiece autoclave STATIM 2000S benefits: Ultra fast 6:45 minute unwrapped cycle 10:40 minute wrapped cycle Exceptional instrument turnover 10 minute Dri-Tec drying Technology Single use water ...

Carrying capacity: 2.5 kg
Temperature range: 100 °C - 300 °C
Width: 13 cm

... bead sterilizer is a sterilizing instrument, which is commonly used in endodontic dentistry. Glass bead sterilizer works on the principle of intense dry heat. Even though many sterilizing ...

Capacity: 22 l
Temperature range: 0 °C - 230 °C

... DRY STERLIZER 23 LITRES,complete with 4 shelves;Temperature from 0 to 120°C Stainless steel made,with painted door,to have the maximum resistence,to heat and time. The 4 trays are in aluminium with big holes for an easy ...

Capacity: 1.5 l
Temperature range: 150 °C - 180 °C
Sterilization cycle time: 0 min - 120 min

... tools allows a complete and effective sterilization. The main feature of the HOT DRY is the reliability. A slab of glass fiber insulating ensures the insulation of the heat, keeping the temperature constant inside, and ...

Capacity: 20 l
Carrying capacity: 20 kg
Temperature range: 5 °C - 200 °C

... Air sterilizers GP are intended for air sterilization of the surgical tool, heat-resistant syringes and needles (with a mark + 200 ° C), and also glassware, other objects of medical appointment. Sterilization occurs ...

Capacity: 100, 175 cm³
Temperature range: 0 °C - 270 °C
Width: 15, 21 cm

... and then the sterilizer is ready for use. The temperature is thermostatically maintained, and the unit can be left on all day. Instruments require approximately 20 seconds of contact with the beads for complete sterilization. The sterilizer ...

Temperature range: 750 °C - 1,000 °C
Sterilization cycle time: 15 min
Width: 110 mm

... • Instantly ready to work without any unnecessary warm-up • No ranger of combustion on the housing (Cool-Touch) • Comfortable touch or footpedal operation (footpedal optional) • Efficient use of energy through Thermocontol Technology • Annealing tube ...

The bed unit disinfector uses the high concentration ozone generation device and the air pump pressurization technology to inject the high concentration ozone into the special disinfection bag in the way of pressurization and penetration, so as to achieve ...

Capacity: 260 l - 3,000 l
Temperature range: 105 °C - 139 °C

... Dry heat sterilizer is mainly used for sterilization of high temperature resistant materials. The steam sterilizer fully meets the requirements of GMP standard and ...

Capacity: 52.8 l
Temperature range: 35 °C - 220 °C
Width: 558 mm

... This unit allows to remove the economical burden to buy the incubator separately because it has the two functions of dry- heat sterilizer and incubator. Sterilizing and incubating mode has 5 kinds of cycle ...

Capacity: 1 l
Temperature range: 150 °C - 200 °C
Width: 440 cm

... One of the most efficient means of removing all pathogenic germs from an object, even the most resistant to heat, is a system using hot air dry sterilization. The Automatic TAU STERIL ...

Temperature range: 250 °C

... Hot Steril 141 N description Color: black. External dimensions: 46X35x30 cm Inner dimensions: 29X26X16 cm Sterilizer for dry sterilization of the metal tools only. It can reach a temperature of 250 degrees, ...

Capacity: 1 l

... syringes and bags cGMP equipment of moist heat, high pressure – high vacuum for the Steam Sterilization of porous and non-porous loads Further, we offer Dry Heat Sterilization and Depyrogenation cGMP ...

Capacity: 55 l
Temperature range: 101 °C - 138 °C
Sterilization cycle time: 1 min - 99 min

... steel AISI304, the working vessel and lid is in stainless steel AISI 316 internally mechanically polished (mirror finishing). Hot air and exhausted steam are condensed and collected in a proper tank, avoiding leakage ...

Capacity: 3, 5 l
Temperature range: 0 °C - 200 °C
Width: 295, 325 mm

... DRY HEAT STERILIZING UNIT mod. “SMALL” Outer case made of stainless steel. Inner structure, grid, removable perforated tray, hinged lid completely made of stainless steel. Inner structure and lid with nontoxic silicon ...

Capacity: 1,500, 3,125, 420, 560 l
Temperature range: 250, 300, 350 °C
Width: 2,150, 1,650, 1,900 mm

... safely and cost-effectively sterilise samples or products, then the process of dry heat serialisation is an interesting alternative to the other existing procedures. Only hot air is used ...

Capacity: 138, 188, 70, 57, 34 l
Temperature range: 10 °C - 250 °C
Width: 630, 830, 540, 845, 890 mm

... Dry heat sterilizer DOF-HAS-A Series uses high-temperature dry heat to oxidize microorganisms, denature proteins, and cause poisoning due to electrolyte concentration. ...

Temperature range: 250 °C
Sterilization cycle time: 2 min - 5 min
Width: 5 in

... well without discomfort. Sterilization of the inserted parts by dry heat (250° C) takes 2-5 seconds. The working end is sterile before the handles get hot. Small Footprint The sterilizer’s small size ...

Capacity: 30 l - 2,400 l
Temperature range: 7 °C - 200 °C
Width: 369 mm - 2,214 mm

... Steridium’s new generation of hot air sterilizers have been designed to the highest European standards and manufactured to ensure performance, reliability and repeatability demanded medical and dental ...

Capacity: 25 l
Temperature range: 0 °C - 100 °C
Width: 470 mm

... Benchtop Hot Air Sterilizer LX400HAS is a benchtop design, back heating, horizontal force convection with adjustable air speed to ensure chamber temperature uniformity. This is utilized for the effects ...