Ultrasound imaging examination table SO-1065

adultelectricreverse Trendelenburg

Overview
A specially designed sonography table provides accurate patient positioning to optimize image acquisition during ultrasound examinations. AGA Sanitätsartikel offers these tables in two- or three-piece tabletops with fixed height. Models support Trendelenburg / Anti‑Trendelenburg angles, roof and head‑down positions to facilitate examinations of abdominal organs and sonographically guided injections.

Versions

• 3-piece tabletop, Article No.: SO-ZK 1065/EE — three upholstery segments; leg and back sections adjustable electrically, head section adjustable manually; supports horizontal, Trendelenburg / Anti‑Trendelenburg, roof and head‑down positions.
• 2-piece tabletop, Article No.: SO-1065 — two halves adjusted by gas pressure springs; supports horizontal, Trendelenburg / Anti‑Trendelenburg and roof positions.

Features

• Independent control of upholstery segments allows transition between horizontal and roof positions via Trendelenburg or Anti‑Trendelenburg adjustments.
• Wide base frame delivers high stability; four adjustable feet with floor protectors (clip-on caps).
• Upholstery segment thickness: 64 mm each.
• Standard table height (cushions horizontal): 700 mm; standard width: 650 mm (other widths up to 800 mm available as variants).

SO-ZK 1065/EE (three-section)

• Head/back and leg sections continuously adjusted positive/negative (+20° / -17°) by electric motors. Control via foot switch (alternative hand switch at no extra charge).
• Headrest adjustment continuously +40° / -30°, locked by clamping handle and rod mechanism.
• Design load capacity for electric version: up to 200 kg. Adjustment systems equipped with key locks.
• Motor connection values (per motor): 230 V, 50/60 Hz, 3.7 A, 850 W, IPX4; speed v ≈ 11 mm/s; force 10,000 N.

SO-1065 (two-section)

• Two tabletop halves adjusted continuously with gas pressure springs (+15° / -17°) and locked with handwheels. Required examination positions must be pre-set (i.e. without the patient).
• Design load capacity: 150 kg.

Technical data
Article number — SO-1065 | SO-ZK 1065/EE
Overall length (head → foot) — 1,900 mm (SO-1065: 950 / 950 mm | SO-ZK 1065/EE: 350 / 600 / 950 mm)
Width — 650 mm (standard; variants up to 800 mm)
Height — 700 mm (standard)
Upholstery segments — 2 (SO-1065) | 3 (SO-ZK 1065/EE)
Upholstery thickness — 64 mm
Load capacity — 150 kg (SO-1065) | 200 kg (SO-ZK 1065/EE)
Head section adjustment — not applicable (SO-1065) | SO-ZK 1065/EE: -30° / +40° (clamping rod)
Foot/backrest adjustments — SO-1065: -17° / +15° (gas springs) | SO-ZK 1065/EE: -17° / +20° (electric motors)
Trendelenburg / Anti‑Trendelenburg — SO-1065: 15° (gas) | SO-ZK 1065/EE: 17° (electric)

Standard configuration

• Floor protectors (clip-on caps) on the four adjustable feet.

Accessories and options (selection)

• Semi-circular roll, head wedge, knee roll, neck roll — foam with synthetic leather covers and zippers.
• Sets of castors Ø 75 mm or Ø 125 mm; central locking castor system (Ø 125 mm) — mobile base on retractable castors available for some variants.
• Levelling feet (set of 4), stainless steel standard rails (pairs) for mounting on the upholstery frame, paper roll holder for table legs.

Technical specifications

• Manufacturer / Brand: AGA Sanitätsartikel
• Models: SO-ZK 1065/EE (3-section, electric adjustment), SO-1065 (2-section, gas spring adjustment)
• Overall length: 1,900 mm
• Width: standard 650 mm (variants up to 800 mm)
• Standard height: 700 mm (other heights available by variant)
• Upholstery thickness: 64 mm
• Load capacity: 150 kg (SO-1065) | 200 kg (SO-ZK 1065/EE)
• Head section (SO-ZK 1065/EE): +40° / -30°
• Foot/backrest angles: gas springs -17° / +15° (SO-1065) | electric motors -17° / +20° (SO-ZK 1065/EE)
• Motor (per motor, SO-ZK 1065/EE): 230 V, 50/60 Hz, 3.7 A, 850 W, IPX4, v ≈ 11 mm/s, 10,000 N
• Number of sections: 2 or 3 depending on version