Ultrasound imaging examination table H-SU 1065/H

adultmanualheight-adjustable

Product overview
Manual height adjustable examination tables, equipped with a positively and negatively adjustable headrest. These tables are cost-conscious products, recommended for users who need height adjustment only occasionally or who prefer operation independent of a power supply. The height gear is operated by a hand crank located at the foot end below the upholstered frame; after use the hand crank is pushed back under the tabletop frame. The head-down position (negative headrest) is suitable for sonographic evaluations of neck soft tissue (e.g. thyroid). Models are available in three frame finishes (lacquered, chrome-plated and stainless steel) and two tabletop widths (650 mm and 800 mm).

Features

• Precision double square guides to avoid rocking and lateral offset during height adjustment.
• Maintenance-free gear with an optimal transmission ratio (i = 10 mm/rev) for jerk-free, fast and easy operation, capable of adjusting even with heavy patients (load capacity up to 200 kg).
• Available widths and article ranges:
  • Width 650 mm: Article No.: H-SU 1065/H, H-SU 2065/H and H-SU 3065/H
  • Width 800 mm: Article No.: H-SU 1080/H, H-SU 2080/H and H-SU 3080/H
• Gusset plates in the frame corners provide stability and robustness.
• Height adjustment mechanism made of lacquered blank steel.
• Upholstered frame profiles available as:
  • Lacquered blank steel (H-SU 1065/H and H-SU 1080/H)
  • Chrome-plated blank steel (H-SU 2065/H and H-SU 2080/H)
  • Stainless steel (H-SU 3065/H and H-SU 3080/H)
• Two upholstery segments (headrest and main surface) with 64 mm thickness each.
• Chrome-plated crossbars with levelling feet (flat foot construction) for improved resistance to external impacts compared to plastic-coated versions.
• Headrest continuously adjustable up to +/- 30° and lockable by a handle with a clamping rod mechanism.

Standard version includes

• Levelling feet on the chrome-plated crossbars.

Frame colours (standard lacquer finishes)

• Light grey (RAL 7035)
• White aluminum (RAL 9006)
• Pure white (RAL 9010)

Upholstery
The artificial leather covers are tear-resistant, durable, disinfectant-resistant and easy to clean. A standard synthetic leather range is used; other colours or manufacturers are available as type variants. An electrically conductive synthetic leather (black) with equipotential bonding socket is available at additional cost (used as standard on operating tables and multifunction tables).

Accessories & additional options (selection)
Key optional components and accessories include (excerpt):

• Face cutout in the headrest (oval) and an upholstered insert for closing the opening (dimensions approx. 205 x 105 mm / 200 x 100 mm) — retrofitting not possible for some variants.
• Headrest adjustment via gas pressure spring (instead of clamping rod) for one-hand operation — retrofitting not possible.
• Sets of castors Ø 75 mm or Ø 125 mm (four swivel castors, two lockable).
• Central locking castor system with double swivel castors Ø 125 mm and diagonal foot pedals (table ready for moving / table locked) — retrofitting not possible.
• Standard rails (pair) in various lengths (approx. 400 mm, 600 mm, 1,000 mm, 1,400 mm) made of CrNi steel for mounting on the upholstery frame — retrofitting not possible for some variants.
• Paper roll holders for table widths 650 mm and 800 mm (chrome-plated, mounted from below on the upholstered headboard).
• Other available accessories: infusion stand, all-around edge/impact protection, positioning aids, mobile base on castors, patient belts, removable or pivoting side guards, shock position / Trendelenburg adjustment, wall deflector rings in the four corners of the table.

Technical details (tables)
Table width 650 mm:
Article numbers: H-SU 1065/H, H-SU 2065/H, H-SU 3065/H
Frame: Lacquered / Chrome / Stainless steel (depending on article)
Length (headrest / main section): 1,900 mm — 500 / 1,400 mm
Width: 650 mm
Height adjustment: 650 - 850 mm (hand crank)
Upholstery segments: 2 sections
Upholstery thickness: 64 mm
Headrest adjustment: +/- 30° (clamping rods)
Load capacity: 200 kg

Table width 800 mm:
Article numbers: H-SU 1080/H, H-SU 2080/H, H-SU 3080/H
Frame: Lacquered / Chrome / Stainless steel (depending on article)
Length (headrest / main section): 1,900 mm — 500 / 1,400 mm
Width: 800 mm
Height adjustment: 650 - 850 mm (hand crank)
Upholstery segments: 2 sections
Upholstery thickness: 64 mm
Headrest adjustment: +/- 30° (clamping rods)
Load capacity: 200 kg

Notes
In these tables the term 'frame' refers to the upholstered tabletop frame only. The height adjustment mechanism is available in lacquered finish; crossbars (with levelling feet) are chrome-plated. Some options and colour/type variants are considered custom variants (additional charge, no right of return).

Caractéristiques / spécifications techniques

• Series: H-SU series
• Tabletop lengths: 1,900 mm (headrest/main section 500 / 1,400 mm)
• Widths available: 650 mm and 800 mm
• Height adjustment (hand crank): 650 - 850 mm
• Upholstery: 2 segments, thickness 64 mm
• Headrest adjustment: +/- 30° (clamping rod mechanism) — optional gas spring adjustment available on some variants
• Load capacity: 200 kg
• Frame finishes: lacquered blank steel / chrome-plated blank steel / stainless steel
• Standard crossbars: chrome-plated with levelling feet