Dental laboratory burr ACR/EQ

tungsten carbide

Special toothing for denture acrylicsThe new ACR toothing developed by Kometmakes this cutter particularly pleasantto work with, even during rough work ondenture acrylics. Specially adapted for workon denture acrylics, the intermediate tooth-ing of this cutter is right between the coarseand medium staggered toothing. The nameACR stands for the acrylic-based materialsthe cutter is intended for. The instrumentis particularly efficient, does not jam on thesurface and is easy to control. The resuit:Pleasant work and a perfectly groundsurface. Advantages: •Great cutting performance •Easy to control •Pleasant to work with This dual cutter is an all-rounder suitable for all types of work on resin It’s the specially developed EQ toothing that makes this tungsten carbide cutter so “intelligent”. Identifiable by its pink ring, this dual cutter is provided with one extremely sharp and one very fine toothing, which allows the instrument to perform both quick and effective rough work and fine smoothing of surfaces. It is equally suitable for finishing fine details. Thanks to this ingenious new cutter, the operator can switch between these two work phases without having to change the instrument. The instrument does not have to be put down during work, which is why there is no loss of feeling for the instrument and the work piece. Another factor that makes work even more comfortable is the fact that very little heat is generated, even during initial rough work. The fine tip of the instruments creates extremely smooth surfaces. As a result, one or two polishing steps and a lot of time can be saved. In short: cutting and high shine polishing - that’s all.