Distal compression plate

tibiafemoralproximal

The plate is used for fixation of distal tibia fracture parts. Angularly stable screws are mainly used for articular fractures. The angles of the screws introductions are chosen in a way so that they would fix as many fragments as possible and they would minimise the possibility of screws pulling out of the bone. The proximal part of the plate is the same at all the sizes, there are 10 holes for locking screws. The shank part of the plate has from 4 to 12 locking holes and one oval hole. The longer plates enable fracture fixation in the area of diaphysis. The plates are anatomically shaped and are supplied in right or left version. To these angularly stable plates are used locking screws self-tapping with diameters 5 mm and 5/3,5 mm. Plates are compatible with periprosthetic clamps. Implants are made of implant steel ISO 58321E or Titanium Ti6Al4V ELI ISO 5832-3. Angularly stable plates The system is based on the principle of the inner fixator. By means of the tight connection "screw-plate", the angularly stable connection is achieved between the plate and the bone. This transfers part of the weight from the screw-bone connection to the screw-plate connection. Thanks to that it is possible to use the system successfully even in a less quality and an osteoporotic bone. If the angularly stable plate is used with locking bone screws, the plate and the screws make tight system together.