Medical device galvanic isolator SMART-MED MLI-6000

Medical 2.5 Gigabit Network Isolator with 6kV Isolation. UL/CSA listed. - UL / IEC 60601−1 :2012 & IEC / EN 60601-1-2 :2020 certified - Enhanced reinforced isolation - 6000 VAC for 1 minute - Secures your system - built-in surge and overvoltage protection - TRUESPEED Technology - for up to 100% Network performance without losses - Durable - no ageing parts, 5 years warranty and long-term availability - Made in Germany The SMART-MED MLI-6000 Network Isolator is designed for medical electrical systems to minimize leakage currents and isolate applied parts from IT devices. It safeguards connected equipment against voltage surges, lightning strikes, ground loops, and electrical noise. The MLI-6000 is fully transparent to the network, requiring no additional drivers or external power supply. Its extremely low signal loss and minimal capacitance allow cable lengths of up to 99 m without compromising network performance. This makes it possible to deploy multiple isolators within large local area networks without any degradation of data transmission. As a state-of-the-art solution, the MLI-6000 can be mounted on DIN rails or flat surfaces. Manufactured in Germany under ISO 13485 standards, each unit undergoes thorough testing for performance and isolation up to 6000 V AC, ensuring a zero-defect rate and maximum reliability. Technical Components: - Isolation type: Reinforced Isolation pulse transformer - Surge Protection: Yes, reinforced TAZ Diode (Transient Absorption Zener Diode) - Working Voltage of max. 400 V AC / 450 V DC - Supported Transfer length of 10 / 100 / 1000 / 2500 MBit - RJ45 Jack input connector & RJ45 Jack output connector - Norms & Conformity: - IEC60601−1 :2012, IEC60601−1−2 :2014, CAN/CSA-C22.2 No.60601−1:14, ANSI/AAMI ES60601-1/A1 :2012 - CE, RoHS - IP40