Medical device galvanic isolator EMOSAFE EN-65

EMOSAFE EN-65 network isolators withstand 5000 VAC for one minute and support speeds of up to 1 Gigabit/s. EMOSAFE EN-65 Network Isolators are designed for use in copper-based Ethernet connections across private, public, and commercial networks — and are particularly suited for medical technology applications. They provide effective protection for both patients and operators against leakage currents and fully comply with the stringent requirements of the UL/IEC 60601–1 international standard for galvanic isolation devices in medical environments. The EN-60 Series Network Isolators completely interrupt any galvanic connection (including wires and shielding) between devices linked via copper network cables. This prevents potential equalization currents and shields connected equipment and users from transient overvoltages caused by installation faults, lightning strikes, switching operations, or electrostatic discharge. When connected to medical devices, the EN-60 Series Isolators ensure safe and reliable operation within patient environments. They also meet all IEC 60601-1 requirements for two Means of Patient Protection (2 MOPP) at the network interface, significantly reducing electrical risks for both patients and operators. Available Versions of the EMOSAFE EN-65 Series Network Isolator: - EN-65K: Keystone Mounting Type - EN-65S: Snapfit Mounting Type Technical Information EMOSAFE EN-65 Series Network Isolator - Isolation type: Reinforced Isolation pulse transformer - Surge Protection: Yes, TVS Diodes - Working Voltage of max. 400 V AC / 450 V DC - Supported Transfer length of 10 / 100 / 1000 MBit/s - Plug & Play, autoconfiguration, driverless - Return Loss: 20 dB typical (100 MHz), Insertion Loss: 0.5 dB typical (100 MHz) - Reinforced Isolation UL/IEC60601-1 5 kV AC for 1 Minute (50/60Hz), 8.5 kV DC for 1 Minute Sizes & Measurement - Color: White - ca. 26 g (200mm cable length) Norms & Conformity - UL/IEC60601−1 :2012 - CE, RoH - IP40