DISS outlet 3206016

medical gas

Silbermann offers DISS-type medical gas outlets manufactured in compliance with NFPA 99, ISO 9170-1, and CGA V-5 standards.

Built to last, they connect securely to medical equipment and deliver a steady, dependable gas supply to patients.

They work well across many hospital settings, including anesthesia, intensive care, and respiratory therapy.

Each outlet is thoroughly tested for flow and leakage, and cleaned for oxygen service before shipping.

The DISS-type outlet can be mounted on walls, panels, or pendants, making it a good fit for a range of clinical environments.

Compatible with gases such as oxygen, medical air, and vacuum, and color-coded for safe, quick identification.

FEATURES & BENEFITS

• Accepts DISS gas-specific adapters.
• The outlets are factory-assembled, degreased, and cleaned for medical and gas service.
• Indexed to eliminate interchangeability of gas services.
• 360-degree swivel inlet pipe for ease of installation.
• Safe plug-in & release allows parking of the male adapter on the outlet thread without pressure applied.
• Low maintenance due to the use of VITON seals in the front assembly (latch valve).
• Modular singles - designed to provide ganging of rough-in modules in the field to form multiple at any order with 120 mm spacing.

SPECIFICATION

• The medical gas outlet shall be SILBERMANN DISS type manufactured according to NFPA 99.
• The outlet shall be gas-specific by the DISS system.
• The positive and negative pressure outlet shall consist of primary and secondary check valves to allow testing and online maintenance. The outlet shall be manufactured with 175 mm long, type K, 12.7 mm (1/2”) OD copper pipe. Rough-in pipe shall be silver brazed to the outlet body.
• With the rough-in mounted, the outlet shall be depth-adjustable to compensate for various wall thicknesses.
• The quick-connect outlet shall comply with ISO 9170-1 & CGA-V5 standard types and accept only the corresponding DISS Gas Specific Adapter.
• Pressure drop of less than 20 kPa through the outlet at 120 LPM and 350 kPa (3.5 Bar) inlet pressure. When fully open, the outlet allows a flow of up to 600LPM at a pressure of 400 kPa (4 Bars).

Medical Gas System Standards:

• NFPA 99
• EN ISO 7396-1
• G-01

Applicable Outlet Standards:

• NFPA 99
• ISO 9170-1:2017
• CGA V-5

Silbermann’s Quality Management System:

• EN ISO 13485:2016
• ISO 9001:2015